1
                       SECURITIES AND EXCHANGE COMMISSION
                             WASHINGTON, D.C. 20549

                                    FORM 10-K


[x] Annual report pursuant to Section 13 or 15(d) of the Securities
    Exchange Act of 1934 For the fiscal year ended June 28, 1998.

[ ] Transition report pursuant to Section 13 or 15(d) of the Securities 
    Exchange Act of 1934

                         Commission File Number 0-25150

                          STRATTEC SECURITY CORPORATION
                          -----------------------------
             (Exact name of registrant as specified in its charter)

          WISCONSIN                                     39-1804239
          ---------                                     ----------
    (State of Incorporation)              (I.R.S. Employer Identification No.)

                  3333 WEST GOOD HOPE ROAD, MILWAUKEE, WI 53209
                  ---------------------------------------------
                    (Address of principal executive offices)

                                 (414) 247-3333
                                 --------------
              (Registrant's telephone number, including area code)

           Securities registered pursuant to Section 12(b) of the Act:

    Title of each class                   Name of exchange on which registered
    -------------------                   ------------------------------------
          N/A                                          N/A

           Securities registered pursuant to Section 12(g) of the Act:

                          Common Stock, $.01 par value
                          ----------------------------
                                (Title of Class)

Indicate by check mark whether the registrant (1) has filed all reports required
to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during
the preceding 12 months (or for such shorter period that the registrant was
required to file such reports), and (2) has been subject to such filing
requirements for the past 90 days. [x]Yes  [ ]No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405
of Regulation S-K is not contained herein, and will not be contained, to the
best of the registrant's knowledge, in definitive proxy or information
statements incorporated by reference in Part III of this Form 10-K or any
amendment of this Form 10-K.     [ ]

The aggregate market value of the voting Common Stock held by non-affiliates of
the registrant as of August 19, 1998 was approximately $165,646,000 (based upon
the last reported sale price of the Common Stock at August 19, 1998 on the
NASDAQ National Market). On August 19, 1998, there were outstanding 5,721,858
shares of $.01 par value Common Stock.

                       Documents Incorporated by Reference

                                                        Part of the Form 10-K
                                                       into which incorporated
         Document                                      -----------------------
         --------

Portions of the Annual Report to Shareholders
for the fiscal year ended June 28, 1998.                      I, II, IV

Portions of the Proxy Statement dated September 9, 1998,
for the Annual Meeting of Shareholders to be held on 
October 22, 1998.                                                III


   2

                                     PART I

ITEM 1.  BUSINESS

         The information set forth under "Company Description" which appears on
pages 4 through 8 of the Company's 1998 Annual Report to Shareholders is
incorporated herein by reference. For information as to export sales, see the
information set forth under "Export Sales" included on page 22 of the Company's
1998 Annual Report to Shareholders, which is incorporated herein by reference.

EMERGING TECHNOLOGIES

         New electronic technologies are expected to become increasingly
important in future product designs. These technologies may include radio
frequency transmission and receiving, Hall effects sensing, optical reading and
sensing, and custom integrated circuit technology. Further advancements with
respect to RFID applications such as encrypted signals and rolling codes are
anticipated. Specific applications of certain of these technologies began in
prior model years. Application will occur in both OEM and aftermarket products.
In connection with the development of these technologies, the Company intends to
utilize strategic alliances and/or strategic sourcing with respect to certain
components in order to remain competitive from both a cost and quality
standpoint.

SOURCES AND AVAILABILITY OF RAW MATERIALS

         The primary raw materials used by the Company are high-grade zinc and
brass. These materials are generally available from a number of suppliers, but
the Company has chosen to concentrate its sourcing with one primary vendor for
each commodity. The Company believes its sources for raw materials are very
reliable and adequate for its needs. The Company has not experienced any
significant long term supply problems in its operations and does not anticipate
any significant supply problems in the foreseeable future.

PATENTS, TRADEMARKS AND OTHER INTELLECTUAL PROPERTY

         The Company believes that the success of its business will not only
result from the technical competence, creativity and marketing abilities of its
employees but also from the protection of its intellectual property through
patents, trademarks and copyrights. As part of its ongoing research, development
and manufacturing activities, the Company has a policy of seeking patents on new
products, processes and improvements when appropriate. The Company owns 25
issued United States patents, with expirations occurring between 1999 and 2016.

         Although, in the aggregate, the patents discussed above are of
considerable importance to the manufacturing and marketing of many of its
products, the Company does not consider any single patent or trademark or group
of patents or trademarks to be material to its business as a whole, except for
the STRATTEC and STRATTEC with logo trademarks.

         The Company also relies upon trade secret protection for its
confidential and proprietary information. The Company maintains confidentiality
agreements with its key executives. In addition, the Company enters into
confidentiality agreements with selected suppliers, consultants and associates
as appropriate to evaluate new products or business relationships pertinent to
the success of the Company. However, there can be no assurance that others will
not independently obtain similar information and techniques or otherwise gain
access to the Company's trade secrets or that the Company can effectively
protect its trade secrets.

DEPENDENCE UPON SIGNIFICANT CUSTOMERS

         A very significant portion of the Company's annual sales are to General
Motors Corporation, Ford Motor Company and Chrysler Corporation. In fiscal years
1998, 1997 and 1996, these three customers accounted for 85%, 85% and 82%
respectively, of the Company's total net sales. The Company began production
volume shipments of locksets to the Ford Motor Company during fiscal year 1996.
Further information regarding sales to the Company's largest customers is set
forth under "Sales to Largest Customers" included on page 22 of the Company's
1998 Annual Report to Shareholders, which is incorporated herein by reference.


   3


         The products sold to these customers are model specific, fitting only
certain defined applications. Consequently, the Company is highly dependent on
its major customers for their business, and on these customers' ability to
produce and sell vehicles which utilize the Company's products. The Company has
enjoyed relationships with General Motors Corporation, Chrysler Corporation and
Ford Motor Company in the past, and expects to do so in the future. However, a
significant change in the purchasing practices of, or a significant loss of
volume from, one or more of these customers could have a detrimental effect on
the Company's financial performance.

SALES AND MARKETING

         The Company provides its customers with engineered locksets, which are
unique to specific vehicles. Any given vehicle will typically take 1 to 3 years
of development and engineering design time prior to being offered to the public.
The locksets are designed concurrently with the vehicle. Therefore, commitment
to the Company as the production source occurs 1 to 3 years prior to the start
of production.

         The typical process used by the "Big Three" automotive manufacturers in
selecting a lock supplier is to offer the business opportunity to the Company
and various of the Company's competitors. Each competitor will pursue the
opportunity, doing its best to provide the customer with the most attractive
proposal. Price pressure is strong during this process but once an agreement is
reached, the price is fixed for each year of the product program. Typically,
price reductions resulting from productivity improvement by the Company are
included in the contract and are estimated in evaluating each of these
opportunities by the Company. A blanket purchase order, a contract indicating a
specified part will be supplied at a specified price during a defined time
period, is issued by customers for each model year and releases, quantity
commitments, are made to that purchase order for weekly deliveries to the
customer. As a consequence and because the Company is a "Just-in-Time" supplier
to the automotive industry, it does not maintain a backlog of orders in the
classic sense for future production and shipment.

COMPETITION

         The Company competes with domestic and foreign-based competitors on the
basis of custom product design, engineering support, quality, delivery and
price. While the number of direct competitors is currently relatively small, the
auto manufacturers actively encourage competition between potential suppliers.
Although the Company may not be the lowest cost producer, it has a dominant
share of the North American market because of its ability to provide a
beneficial combination of price, quality and technical support. In order to
reduce lockset production costs while still offering a wide range of technical
support, the Company utilizes assembly operations in Mexico, which results in
lower labor costs as compared to the United States.

         As locks become more sophisticated and involve additional electronics,
competitors with specific electronic expertise may emerge to challenge the
Company.

RESEARCH AND DEVELOPMENT

         The Company engages in research and development activities pertinent to
the automotive security industry. A major area of focus for research is the
expanding role of electronic interlocks and modes of communicating authorization
data between consumers and vehicles. Development activities include new
products, applications and product performance improvement. In addition,
specialized data collection equipment is developed to facilitate increased
product development efficiency and continuous quality improvements. For fiscal
years 1998, 1997, and 1996, the Company spent $2,979,000, $2,713,000, and
$2,772,000, respectively, on research and development. The Company believes
that, historically, it has committed sufficient resources to research and
development and anticipates increasing such expenditures in the future as
required to support additional product programs associated with both existing
and new customers. Patents are pursued and will continue to be pursued as
appropriate to protect the Company's interests resulting from these activities.


   4



CUSTOMER TOOLING

         An important aspect of the Company's production processes is customer
program specific assembly lines and production tooling. In general, capital
equipment acquired by the Company for customer product programs is recognized as
a long-term asset and depreciated. Tooling for these same programs, obtained
primarily from third party tool suppliers, is accumulated as a current asset on
the Company's balance sheet and rebilled to the customer upon formal product
approval from the customer. For certain products, the Company retains ownership
of both the equipment and tooling. Recovery of these costs occurs over the life
of the program through the piece price. See Notes to Consolidated Financial
Statements included in the Company's 1998 Annual Report to Shareholders, which
is incorporated herein by reference.

ENVIRONMENTAL COMPLIANCE

         As is the case with other manufacturers, the Company is subject to
federal, state, local and foreign laws and other legal requirements relating to
the generation, storage, transport, treatment and disposal of materials as a
result of its lock and key manufacturing and assembly operations. These laws
include the Resource Conservation and Recovery Act (as amended), the Clean Air
Act (as amended), the Clean Water Act of 1990 (as amended) and the Comprehensive
Environmental Response, Compensation and Liability Act (as amended). The Company
believes that its existing environmental management policies and procedures are
adequate and it has no current plans for substantial capital expenditures in the
environmental area.

         Contamination existing at the Company's Milwaukee site from an
underground waste coolant storage tank and a former above-ground solvent storage
tank, located on the east side of the facility, will be remediated in accordance
with federal, state and local requirements.

         The Company does not currently anticipate any materially adverse impact
on its results of operations, financial condition or competitive position as a
result of compliance with federal, state, local and foreign environmental laws
or other legal requirements. However, risk of environmental liability and
charges associated with maintaining compliance with environmental laws is
inherent in the nature of the Company's business and there is no assurance that
material liabilities or charges could not arise.

EMPLOYEES

         At June 28, 1998, the Company had approximately 2,680 full-time
employees,  of which  approximately 515 or 19 percent,  were represented by a
labor union.

ITEM 2.  PROPERTIES

         The Company has two manufacturing plants, one warehouse, two
distribution centers, and a sales office. These facilities are described as
follows:

LOCATION TYPE SQ. FT. OWNED OR LEASED -------- ---- ------- --------------- Milwaukee, Wisconsin Headquarters and General Offices; Component Manufacturing and Assembly.......................... 352,000 Owned Juarez, Chihuahua Mexico Subsidiary Offices and Assembly..................... 97,000 Owned Somerset, New Jersey Service Parts Distribution.......................... 6,500 Leased* Carpenteria, California Service Parts Distribution.......................... 4,000 Leased* El Paso, Texas Finished Goods Warehouse............................ 12,500 Leased** Troy, Michigan Sales Office for Detroit Area....................... 3,000 Leased**
- ------------- * Leased floor space within a warehouse facility. ** Leased unit within a complex. The Company believes that both of its production facilities are adequate for the foreseeable future. 5 ITEM 3. LEGAL PROCEEDINGS In the normal course of business the Company may be involved in various legal proceedings from time to time. The Company does not believe it is currently involved in any claim or action the ultimate disposition of which would have a material adverse effect on the Company or its financial condition. ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS There were no matters submitted to a vote of shareholders during the fourth quarter of fiscal 1998. EXECUTIVE OFFICERS OF REGISTRANT The names, ages and positions of all executive officers of the Company as of the date of this filing are listed below, together with their business experience during the past five years. Executive officers are appointed annually by the Board of Directors at the meeting of directors immediately following the annual meeting of shareholders. There are no family relationships among any of the executive officers of the Company, nor any arrangements or understanding between any such officer and another person pursuant to which he was appointed as an executive officer. NAME, AGE AND POSITION BUSINESS EXPERIENCE - --------------------- ------------------- Harold M. Stratton II, 50 President and Chief Executive Officer of the Corporation since 1994. Vice President of Briggs & Stratton Corporation and General Manager of the Technologies Division of Briggs & Stratton Corporation from 1989 to 1995. John G. Cahill, 41 Executive Vice President, Chief Financial Officer, Treasurer and Secretary of the Corporation since 1994. Vice President, Chief Financial Officer, Secretary and Treasurer, Johnson Worldwide Associates, Inc. (manufacturer and marketer of recreational and marking systems products) 1992 to 1994 and Corporate Controller from 1989 to 1992. Michael R. Elliott, 42 Vice President - Sales and Marketing of the Company since 1994. Vice President - Marketing and Sales of the Technologies Division since 1993. Vice President - Corporate Development of Iverness Casting Group (a producer of castings and injection molded products) from 1991 to 1992. Vice President - Sales and Marketing of Iverness Casting Group from 1990 to 1991. Sales, Marketing and Planning Manager of the AC Rochester Division of General Motors Corporation (an automotive manufacturer) from 1988 to 1990. Gerald L. Peebles, 55 Vice President and General Manager of STRATTEC de Mexico - since 1997. Vice President - Operations of the Company 1995 - 1997. Vice President - Operations of the Technologies Division since 1994. Operations Manager - Juarez Plant of the Technologies Division from 1990 to 1994. Plant Manager - Juarez Plant of the Technologies Division from 1988 to 1990. PART II ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS The information set forth in the "Quarterly Financial Data" section appearing on page 24 of the Company's 1998 Annual Report to Shareholders is incorporated herein by reference. 6 The Company does not intend to pay cash dividends on the Company Common Stock in the foreseeable future; rather, it is currently anticipated that Company earnings will be retained for use in its business. The future payment of dividends will depend on business decisions that will be made by the Board of Directors from time to time based on the results of operations and financial condition of the Company and such other business considerations as the Board of Directors considers relevant. The Company's revolving credit agreement contains restrictions on the payment of dividends. See Notes to Consolidated Financial Statements included in the Company's 1998 Annual Report to Shareholders, which is incorporated herein by reference. ITEM 6. SELECTED FINANCIAL DATA The information set forth under "Five Year Financial Summary" which appears on page 24 of the Company's 1998 Annual Report to Shareholders is incorporated herein by reference. ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF RESULTS OF OPERATIONS AND FINANCIAL CONDITION The information set forth under "Management's Discussion and Analysis" which appears on pages 10 through 12 of the Company's 1998 Annual Report to Shareholders is incorporated herein by reference. ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK The Company did not hold any market risk sensitive instruments during the period covered by this report. ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA The financial statements, together with the report thereon of Arthur Andersen LLP dated July 30, 1998, which appear on pages 13 through 23 of the Company's 1998 Annual Report to Shareholders, are incorporated herein by reference. The Quarterly Financial Data (unaudited) which appears on page 24 of the Company's 1998 Annual Report to Shareholders is incorporated herein by reference. ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE None PART III ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT The information on pages 2, 3 and 5 of the Company's Proxy Statement, dated September 9, 1998, under "Election of Directors" and "Section 16(a) Beneficial Ownership Reporting Compliance" is incorporated herein by reference. ITEM 11. EXECUTIVE COMPENSATION The information on pages 7 through 14 of the Company's Proxy Statement, dated September 9, 1998, under "Executive Compensation" and "Compensation of Directors" is incorporated herein by reference. ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT The information on pages 3 through 5 of the Company's Proxy Statement, dated September 9, 1998, under "Security Ownership" is incorporated herein by reference. ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS The information on pages 7 through 14 of the Company's Proxy Statement, dated September 9, 1998, under "Executive Compensation" is incorporated herein by reference. 7 PART IV ITEM 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K (a) Documents Filed as part of this Report (1) Financial Statements - The following financial statements of the Company, included on pages 13 through 23 of the Company's 1998 Annual Report to Shareholders, are incorporated by reference in Item 8. Report of Independent Public Accountants Balance Sheets - as of June 28, 1998 and June 29, 1997 Statements of Income - years ended June 28, 1998, June 29, 1997 and June 30, 1996 Statements of Changes in Equity - years ended June 28, 1998, June 29, 1997 and June 30, 1996 Statements of Cash Flows - years ended June 28, 1998, June 29, 1997 and June 30, 1996 Notes to Financial Statements (2) Financial Statement Schedules Page in this Form 10-K Report ---------------- Report of Independent Public Accountants 8 Schedule II - Valuation and Qualifying Accounts 9 All other schedules have been omitted because they are not applicable or are not required, or because the required information has been included in the Financial Statements or Notes thereto. (3) Exhibits. See "Exhibit Index" beginning on page 11. (b) Reports on Form 8-K No reports on Form 8-K were filed by the Company during the fourth quarter of fiscal 1998. 8 REPORT OF INDEPENDENT PUBLIC ACCOUNTANTS We have audited in accordance with generally accepted auditing standards the consolidated financial statements included in the STRATTEC SECURITY CORPORATION Annual Report to Shareholders incorporated by reference in this Form 10-K and have issued our report thereon dated July 30, 1998. Our audit was made for the purpose of forming an opinion on those statements taken as a whole. The schedule listed in the accompanying index is the responsibility of the Company's management and is presented for purposes of complying with the Securities and Exchange Commission's rules and is not part of the basic consolidated financial statements. This schedule has been subjected to the auditing procedures applied in the audit of the basic consolidated financial statements and, in our opinion, fairly states in all material respects the financial data required to be set forth therein in relation to the basic consolidated financial statements taken as a whole. ARTHUR ANDERSEN LLP Milwaukee, Wisconsin, July 30, 1998. 9 SCHEDULE II VALUATION AND QUALIFYING ACCOUNTS (THOUSANDS OF DOLLARS)
Balance, Provision Payments Balance, Beginning Charged to and Accounts End of of Year Profit & Loss Written Off Year ------- ------------- ----------- ---- Year ended June 28, 1998 Allowance for doubtful accounts $250 $0 $0 $250 ==== == == ==== Year ended June 29, 1997 Allowance for doubtful accounts $250 $0 $0 $250 ==== == == ==== Year ended June 30, 1996 Allowance for doubtful accounts $250 $0 $0 $250 ==== == == ====
10 SIGNATURES Pursuant to the requirements of Section 13 of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized. STRATTEC SECURITY CORPORATION By: /s/ Harold M. Stratton II ---------------------------- Harold M. Stratton II, President and Chief Executive Officer Date: August 25, 1998 Pursuant to the requirement of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.
Signature Title Date --------- ----- ---- /s/ Harold M. Stratton II President, Chief Executive Officer August 25, 1998 - ------------------------------- and Director Harold M. Stratton II /s/ John G. Cahill Executive Vice President, August 25, 1998 - ------------------------------- Chief Financial Officer, John G. Cahill Treasurer, Secretary & Director /s/ Frank J. Krejci Director August 25, 1998 - ------------------------------- Frank J. Krejci /s/ Michael J. Koss Director August 25, 1998 - ------------------------------- Michael J. Koss /s/ Robert Feitler Director August 25, 1998 - ------------------------------- Robert Feitler
11 EXHIBIT INDEX TO ANNUAL REPORT ON FORM 10-K
Page Number in Sequential Numbering of all Form 10-K and Exhibit Exhibit Pages - ------- ------------- 3.1 (2) Amended and Restated Articles of Incorporation of the Company * 3.2 (2) By-laws of the Company * 4.1 (2) Rights Agreement between the Company and Firstar Trust Company, as Rights Agent * 4.2 (3) Revolving Credit Agreement dated as of February 27, 1995 by and between the Company * and M&I Bank, together with Revolving Credit Note 10.1 (5) STRATTEC SECURITY CORPORATION Stock Incentive Plan * 10.2 (4) Employment Agreements between the Company and the identified executive officers * 10.3 (1) Change In Control Agreement between the Company and the identified executive officers * 10.4 (1) Contribution Agreement, Plan and Agreement of Reorganization and * Distribution between The Briggs & Stratton Corporation ("Briggs") and the Company, dated as of February 27, 1995 (the "Contribution Agreement") 10.5 (1) Quit Claim Deed dated as of February 27, 1995 * 10.6 (1) General Assignment, Assumption and Agreement Regarding Litigation, Claims and * Other Liabilities between Briggs and the Company, dated as of February 27, 1995 10.7 (1) Transitional Trademark Use and License Agreement between Briggs and the Company, * dated as of February 27, 1995 10.8 (1) Insurance Matters Agreement between Briggs and the Company, dated as of * February 27, 1995 10.9 (1) Employee Benefits and Compensation Agreement between Briggs and the Company, dated * as of February 27, 1995 10.10 (1) Tax Sharing and Indemnification Agreement between Briggs and the * Company, dated as of February 27, 1995 10.11 (1) Interim Administrative Services Agreement between Briggs and the * Company, dated as of February 27, 1995 10.12 (1) Confidentially and Nondisclosure Agreement between Briggs and the Company, dated as of February 27, 1995 * 10.13 (1) Assignments of Patents dated as of February 27, 1995 * 10.14 (1) Supply Agreement between Briggs and the Company, dated as of February 27, 1995 * 10.15 (4) STRATTEC SECURITY CORPORATION Economic Value Added Plan for Executive * Officers and Senior Managers 13.1 Annual Report to Shareholders for the year ended June 28, 1998 13
12
Page Number in Sequential Numbering of all Form 10-K and Exhibit Exhibit Pages - ------- ------------- 21 (1) Subsidiaries of the Company * 23 Consent of Independent Public Accountants dated September 9, 1998 34 27 Financial Data Schedule 35
- ----------------------- (1) Incorporated by reference from Amendment No. 1 to the Form 10 filed on January 20, 1995. (2) Incorporated by reference from Amendment No. 2 to the Form 10 filed on February 6, 1995. (3) Incorporated by reference form the April 2, 1995 Form 10-Q filed on May 17, 1995. (4) Incorporated by reference from the July 2, 1995 Form 10-K filed on September 14, 1995. (5) Incorporated by reference from the Proxy Statement for the 1997 Annual Meeting of Shareholders filed on September 10, 1997.
   1
1998 STRATTEC ANNUAL REPORT 
COMPANY DESCRIPTION 

4
                                                       
BASIC BUSINESS

         STRATTEC SECURITY CORPORATION designs, develops, manufactures and
markets mechanical locks, electro-mechanical locks and related security products
for major automotive manufacturers. Our products are shipped to customer
locations in the United States, Canada, Mexico, Europe and South America, and we
provide full service and aftermarket support. We also supply products for the
heavy truck, recreational vehicle, marine and industrial markets, as well as
precision die castings for the transportation, security and recreational
products industries. 
                                                            [STRATTEC LOGO]

HISTORY

         STRATTEC was formerly a division of the Briggs & Stratton Corporation.
On February 27, 1995, STRATTEC was spun-off from Briggs & Stratton through a
tax-free distribution to the then existing Briggs shareholders. STRATTEC
received substantially all of the assets related to the lock and key business
owned by Briggs & Stratton.

         Starting as a division of Briggs & Stratton, and continuing today as a
totally separate and independent company, our history in the automotive lock
manufacturing business spans more than 80 years. We have also been in the zinc
die casting business for approximately 70 years. STRATTEC has been the world's
largest producer of automotive locks and keys since the late 1920s, and we
currently maintain a dominant share of the North American markets for these
products. 
                                  [PICTURE OF NEWS HISTORICAL ADVERTISEMENT]

PRODUCTS

         Our principal products are locks and keys for cars and trucks. A
typical automobile contains a set of five locks: a steering column/ignition
lock, a glove box lock, two front door locks and a deck lid (trunk) lock. Pickup
trucks typically use three to four locks, while sport utility 
                                                  
                                                      [PICTURE OF KEYS]


   2
                                                     1998 STRATTEC ANNUAL REPORT
                                                             COMPANY DESCRIPTION
                                                    
                                                                                
                                                                               5


vehicles and vans will use five to seven locks. Some vehicles have additional
locks for under-floor compartments or folding rear seat latches. T-top locks,
spare tire locks, burglar alarm locks and door locks with illuminated faces are
also offered as options. Usually two keys are provided with each vehicle
lockset.

         STRATTEC produces locks with simple electrical switch devices and more
sophisticated devices, such as resistive elements, radio frequency
identification (RFID) elements and Hall Effect sensors. The primary focus of
these added electronics is increased security and reliability. Electronics will
play an important and ever-increasing role in the future of our security-related
products.


                                                         [PICTURE OF KEYS]
MARKETS

         We are a direct supplier to OEM auto and light truck manufacturers,
over-the-road heavy truck manufacturers and recreational vehicle manufacturers,
as well as other transportation-related manufacturers. For the 1998 model year,
we enjoyed a 66.5% market share in the North American automotive industry,
supplying locks and keys for approximately 92% of General Motor's production,
62% of Ford's, and 100% of Chrysler's production. We are also an OEM components
supplier to a wide array of smaller industrial manufacturers.

         Direct sales to various OEMs represent approximately 85% of our total
sales. The remainder of the company's revenue is received primarily through
sales to the OEM service channels, and the locksmith aftermarket.

         Sales to General Motors, Ford and Chrysler are coordinated through our
direct sales personnel located in our Detroit-area office, and to other OEM
customers through a combination of our own sales personnel and manufacturer
representative agencies. Sales are also partially facilitated through daily
interaction between our lock engineers and customer engineering departments.

         STRATTEC's products are supported by an extensive staff of experienced
lock engineers. This staff, which includes product design, quality and
manufacturing engineers, is capable of providing complete design, development
and testing services of new products for our customers. This staff is also
available for customer


   3
1998 STRATTEC ANNUAL REPORT
COMPANY DESCRIPTION


6

                                                  [PICTURE OF BLUE PRINT]


problem solving, warranty analysis and other activities that arise during a
product's life cycle. Our customers receive after-sales support in the form of
special field service kits, service manuals, and specific in-plant production
repair programs.

         The majority of our OEM products are sold in North America. Export
sales are primarily made up of aftermarket and OEM service business. However,
our dominance in North America translates into a world market share of around
20%, making STRATTEC the largest producer of automotive locks and keys in the
world. We are in the process of expanding our presence in Europe to supply
automotive security products to major manufacturers there through collaborative
agreements with lock manufacturers in that region. Some exporting is also done
to automotive assembly plants in South America.

                                                     [PICTURE OF COMPUTER]

CUSTOMER FOCUS

         Since the majority of the company's sales are to the "Big Three" North
American automotive manufacturers, STRATTEC is organized to assure that our
activities are focused on these major customers. We have four teams: one each
for General Motors, Ford, and Chrysler, and a fourth team which handles our
industrial customers, including heavy truck manufacturers like Peterbilt,
Kenworth, Mack, Freightliner, Navistar, and GM Volvo.


   4
                                                     1998 STRATTEC ANNUAL REPORT
                                                             COMPANY DESCRIPTION
                                                     

                                                                               7


         Each of the four teams possesses all of the necessary disciplines
required to meet their customers' needs. Leading each team's efforts are Product
Business Managers who handle the overall coordination of various product
programs. The Product Business Managers work closely with their team's quality
engineers, cost engineers, purchasing agents, internal and external customer
service representatives, service manager, and engineering manager. The
engineering manager in turn helps coordinate the efforts of design engineers,
product and process engineers, component engineers, and electrical engineers.

         STRATTEC utilizes a formalized product development process to identify
and meet customer needs in the shortest possible time. By creating and following
this streamlined development system, we shorten product lead times, tighten our
response to market changes, and provide our customers with the optimum value
solution to their security requirements. STRATTEC is also QS-9000 / ISO 9001
certified. This means we embrace the philosophy that quality should exist not
only in the finished product, but in every step of our process as well.

                                                         [STRATTEC QUALITY LOGO]

OPERATIONS

The majority of the components that go into our lock products are manufactured
at our main facility and headquarters in Milwaukee, Wisconsin. This facility
also makes zinc die cast components for other manufacturers. Lock assembly is
performed at the Milwaukee location and at our primary assembly facility,
located in Juarez, Mexico.

[PICTURE OF ASSEMBLY LINE]


   5
1998 STRATTEC ANNUAL REPORT
COMPANY DESCRIPTION


8

CYCLICAL NATURE OF THE BUSINESS

         The manufacturing of components that are used in automobiles is driven
by the normal peaks and valleys associated with the automotive industry.
Typically, the months of July and August are relatively slow while summer
vacation shut downs and model year changeover occur at the automotive assembly
plants. September volumes increase rapidly as the new model year begins. This
volume strength continues through October and into early November. As the
holiday and winter seasons approach, the demand for automobiles slows. March
usually brings a major sales and production increase which then continues
through most of June. This results in our first fiscal quarter (ending in Sept.)
typically being our weakest, with the remaining quarters being more consistent.

ECONOMIC VALUE COMMITMENT

         The underlying philosophy of our business, and the means by which we
measure our performance, is Economic Value Added (EVA(R)). Simply stated,
economic value is created when our business enterprise yields a return greater
than the cost of capital we and our shareholders have invested in STRATTEC. The
amount by which our return exceeds the cost of our capital is EVA(R). In line
with this philosophy, EVA(R) bonus plans are in effect for our associates and
our outside directors as an incentive to help positively drive the business.

                              [PICTURE OF COMPANY]

         STRATTEC's significant market share is the result of an eight-decade
long commitment to creating quality products and systems that are responsive to
changing needs. As technologies advance and markets grow, STRATTEC retains that
commitment to meeting and exceeding the expectations of our customers, and
providing economic value to our shareholders.



   6
                                                   1998 STRATTEC ANNUAL REPORT
                                                                  VEHICLE LIST
                                                   

                                                                              9
1999 VEHICLES

         We're proud of the quality vehicles that use STRATTEC components. They
include over-the-road trucks like Peterbilt, Kenworth, Mack, Freightliner,
Navistar and GM Volvo. Recreational vehicles like Winnebago, Coachmen, Jayco and
Fleetwood. And the following 1999 cars and light trucks:

CARS

Buick Century Chrysler 300M Oldsmobile Alero Buick LeSabre Chrysler LHS Oldsmobile Aurora Buick Regal Chrysler Sebring Convertible Oldsmobile Cutlass Buick Riviera Dodge Intrepid Oldsmobile Eighty-Eight Cadillac DeVille Dodge Neon Oldsmobile Intrigue Cadillac Eldorado Dodge Stratus Plymouth Breeze Chevrolet Camaro Dodge Viper Plymouth Neon Chevrolet Cavalier Ford Taurus Plymouth Prowler Chevrolet Corvette General Motors EV1 Pontiac Bonneville Chevrolet Lumina Jaguar S-Type Pontiac Firebird Chevrolet Malibu Lincoln Continental Pontiac Grand Am Chevrolet Monte Carlo Lincoln LS Pontiac Grand Prix Chrysler Cirrus Mercury Sable Pontiac Sunfire Chrysler Concorde Mitsubishi Galant LIGHT TRUCKS, VANS AND SPORT UTILITY VEHICLES Cadillac Escalade Dodge Ram Van Jeep Cherokee Chevrolet Astro Ford Expedition Jeep Grand Cherokee Chevrolet Blazer Ford Explorer Jeep Wrangler Chevrolet Silverado Pickup Ford F-Series Pickup Lincoln Navigator Chevrolet Express Ford Ranger Pickup Mazda Pickup Chevrolet S-10 Pickup GMC Envoy Mercury Mountaineer Chevrolet Suburban GMC Denali Mercury Villager Chevrolet Tahoe GMC Jimmy Nissan Quest Chevrolet Venture GMC Safari Oldsmobile Bravada Chrysler Town & Country GMC Savana Oldsmobile Silhouette Dodge Caravan/Grand Caravan GMC Sierra Pickup Plymouth Voyager/ Dodge Dakota Pickup GMC Sonoma Pickup Grand Voyager Dodge Durango GMC Suburban Pontiac Montana Dodge Ramcharger GMC Yukon Dodge Ram Pickup Isuzu Hombre Pickup
7 1998 STRATTEC ANNUAL REPORT MANAGEMENT'S DISCUSSION AND ANALYSIS 10 The following Discussion and Analysis should be read in conjunction with the Company's Financial Statements and Notes thereto. Unless otherwise indicated, all references to years refer to fiscal years. RESULTS OF OPERATIONS 1998 COMPARED TO 1997 Net sales were $186.8 million in 1998, an increase of 17 percent compared to net sales of $159.1 million in 1997. The sales increase is primarily due to increased sales to all three of the Company's largest customers in the current year compared to prior year levels, with General Motors Corporation increasing $16.4 million or 23 percent, Chrysler Corporation increasing $5.0 million or 24 percent and Ford Motor Company increasing $2.5 million or 6 percent. Sales growth was primarily due to higher value mechanical and electro-mechanical content. Increased sales to Chrysler Corporation also reflect that company's higher vehicle production schedule in the last six months of fiscal 1998 compared to the prior year period. Labor disruptions at General Motors Corporation operations reduced expected sales to this customer by an estimated $3 million during the current year fourth quarter and by an estimated $2 million during the second quarter of fiscal 1997. Gross profit as a percentage of net sales was 21.4 percent in 1998 compared to 20.9 percent in 1997. Gross profit margins improved compared to the prior year due to decreased scrap and premium freight costs. The gross profit margin was negatively impacted by a $750,000 charge during the current year as a result of cash payments to the Company's represented employees upon ratification of a new collective bargaining agreement. During the first six months of 1998, the cost of zinc, which the Company uses at a rate of approximately 1 million to 1.2 million pounds per month, remained significantly above prior year levels increasing to an average of approximately $.74 per pound in the six months ended December 28, 1997, from an average of $.53 per pound in the six months ended December 29, 1996 resulting in a negative impact on gross profit margins. The cost of zinc declined in the second quarter of fiscal 1998 after increasing dramatically over the previous 12 months. Gross profit margins were also negatively impacted as inflationary cost pressures in Mexico over the past 30 months have resulted in higher U.S. dollar costs. The rate of inflation in Mexico during the six months ended June 28, 1998, and during calendar 1997 and 1996 was approximately 8, 16 and 28 percent, respectively. The U.S. dollar/Mexican peso exchange rate remained relatively stable during this period with devaluation during the period September 1997 through June 1998. The exchange rate ranged from approximately 7.40 to 7.90 pesos to the dollar during the period January 1996 through September 1997, and from approximately 7.80 to 9.00 pesos to the dollar during the period October 1997 through June 28, 1998. Engineering, selling and administrative expenses were $18.9 million, or 10.1 percent of net sales in 1998, compared to $17.7 million, or 11.1 percent of net sales in 1997. Engineering expenses increased approximately $700,000 primarily in support of new programs. Selling and marketing expenses increased approximately $200,000 primarily due to increased costs for commissions and promotional items. Administrative expenses increased approximately $300,000, primarily due to increased costs to recruit salaried employees. Income from operations was $21.0 million in 1998, compared to $15.6 million in 1997, reflecting the increased sales volume and improved gross margin as previously discussed above. RESULTS OF OPERATIONS 1997 COMPARED TO 1996 Net sales were $159.1 million in 1997, an increase of 14 percent compared to net sales of $139.8 million in 1996. Sales to the "Big Three" North American automakers continued to represent the majority of sales, accounting for 85 percent in 1997 and 82 percent in 1996. Sales to our largest customer, General Motors Corporation, were $70.4 million in 1997 compared to $65.4 million in 1996, which was negatively affected by a labor strike at a General Motors component plant. Sales to the Ford Motor Company were $43.6 million in 1997 compared to $28.0 million in 1996, when the Company was bringing several new Ford programs into production. Chrysler Corporation sales were $21.0 million in 1997 compared to $20.3 million in 1996. Lockset sales to these customers 8 1998 STRATTEC ANNUAL REPORT MANAGEMENT'S DISCUSSION AND ANALYSIS 11 reflect increased product content from enhanced mechanical and electro-mechanical features. The Company anticipates that this trend will continue with further penetration of existing programs and introductions of new programs. Sales to Briggs & Stratton Corporation ("Briggs") declined to $3.5 million in 1997 from $6.8 million in 1996. Gross profit as a percentage of net sales was 20.9 percent in 1997 and 1996. Increased scrap and expedited freight costs incurred in late 1996 continued in 1997 before improving. Gross profit as a percentage of net sales in the fourth quarter of 1997 was 22.1 percent compared to 18.3 percent in the fourth quarter of 1996. Improved operating performance in the second half of 1997 was somewhat diminished by rising zinc prices. Zinc is one of the Company's primary raw materials and is subject to commodity pricing and variations in market prices. The market price for zinc escalated during the last six months of fiscal 1997 after a period of relative stability for the previous 18 months. The increase has negatively impacted operating results as the Company is generally not able to recover zinc price fluctuations from its customers. Also negatively impacting gross profits were increased costs of the Company's Mexican assembly operations. The U.S. dollar/Mexican peso exchange rate has been relatively stable in the 18 months ending June 29, 1997, while inflationary cost pressures in Mexico have resulted in higher U.S. dollar costs. Engineering, selling, and administrative expenses were $17.7 million, or 11.1 percent, of net sales in 1997, compared to $16.6 million, or 11.9 percent, of net sales in 1996. Engineering expenses increased $1.0 million during 1997 in support of product programs. Selling and marketing expenses declined $300,000 during 1997, primarily due to lower costs for commissions and promotional materials. Administrative expenses increased $400,000, primarily in the first half of 1997, in support of the Company's new business system implementation. As of January 27, 1997, the Company no longer purchased computer services from Briggs. Income from operations was $15.6 million in 1997 compared to $12.6 million in 1996, reflecting increased sales volumes. The effective income tax rate for 1997 was 36.8 percent, compared to 38.5 percent in 1996, due to increased tax benefits from research and development tax credits foreign tax credits, and the Company's foreign sales corporation. The effective rate differs from the federal statutory rate, primarily due to the effects of state income taxes. LIQUIDITY AND CAPITAL RESOURCES The Company generated cash from operating activities of $26.0 million in 1998 compared to $6.1 million in 1997. The increased generation of cash is primarily due to increased sales levels, with no significant changes in working capital levels. The Company's investment in accounts receivable decreased by approximately $4.4 million at June 28, 1998, as compared to June 29, 1997, primarily due to decreased sales levels during June 1998 as a result of labor disruptions at General Motors Corporation, as previously discussed. Inventories of $15.0 million at June 28, 1998, are consistent with the June 29, 1997, levels. Inventory reductions resulting from improved inventory management were offset by increased inventory levels resulting from decreased sales to General Motors Corporation during June, 1998. Capital expenditures in 1998 were $7.5 million, compared to $8.0 million in 1997. Expenditures were primarily for capital equipment in support of new product programs, as well as the upgrade and replacement of existing equipment at the Milwaukee facility. The Company anticipates that capital expenditures will be approximately $9 million in 1999, primarily in support of requirements for new product programs. The Board of Directors of the Company has authorized a stock repurchase program to buy back up to 289,395 outstanding shares. A total of 153,000 shares have been repurchased as of June 28,1998, at a cost of approximately $2.7 million. Additional repurchases may occur from time to time. Funding for the repurchases was provided by cash flow from operations and borrowings under existing credit facilities. The Company has a $25.0 million unsecured, revolving credit facility (the "Credit Facility"). There were no outstanding borrowings under the Credit Facility at June 28, 1998. Interest 9 1998 STRATTEC ANNUAL REPORT MANAGEMENT'S DISCUSSION AND ANALYSIS 12 on borrowings under the Credit Facility are at varying rates based, at the Company's option, on the London Interbank offering rate, the Federal Funds Rate, or the bank's prime rate. The Credit Facility contains various restrictive covenants including covenants that require the Company to maintain minimum levels for certain financial ratios such as tangible net worth, ratio of indebtedness to tangible net worth and fixed charge coverage. The Company believes that the Credit Facility will be adequate, along with cash flow from operations, to meet its anticipated capital expenditure, working capital and operating expenditure requirements. The Company has not been significantly impacted by inflationary pressures over the last several years, except for zinc and Mexican assembly operations as noted elsewhere in this Management's Discussion and Analysis. OTHER The Company has developed a plan to address company-wide Year 2000 readiness. The plan addresses operating systems, manufacturing operations, customers and suppliers. The Company has made significant progress toward completion of this plan and anticipates being Year 2000 compliant during fiscal 1999. The Company is participating in a program coordinated by the Automotive Industries Action Group ("AIAG"), a group sponsored and supported by General Motors Corporation, Chrysler Corporation and the Ford Motor Company. Based upon the guidelines of a Year 2000 Readiness Self-Assessment, developed by the AIAG, the Company is classified as a low risk supplier in relation to Year 2000 compliance as of July 1998. The Company implemented a new business information system in February 1997. Significant modifications to the software to be compliant with the requirements to process transactions in the Year 2000 are not required. Therefore, the Company does not expect that its cost to become Year 2000 compliant will be material to its financial condition or results of operations. MEXICAN OPERATIONS The Company has assembly operations in Juarez, Mexico. Since December 30, 1996, the functional currency of the Mexican operation has been the U.S. dollar, as Mexico is currently considered to be a highly inflationary economy in accordance with Statement of Financial Accounting Standard (SFAS) No. 52, "Foreign Currency Translation." The effect of currency fluctuations in the remeasurement process is included in the determination of income. The effect of currency fluctuations included in the determination of income is not material. Prior to December 30, 1996, the functional currency of the Mexican operation was the Mexican Peso. The effects of currency fluctuations resulted in adjustments to the U.S. dollar value of the Company's net assets and to the equity accounts in accordance with SFAS No. 52. PROSPECTIVE INFORMATION A number of the matters and subject areas discussed in this Annual Report that are not historical or current facts deal with potential future circumstances and developments. These include expected future financial results, liquidity needs, financing ability, planned capital expenditures, management's or the Company's expectations and beliefs, and similar matters discussed in the Company's Management's Discussion and Analysis. The discussions of such matters and subject areas are qualified by the inherent risk and uncertainties surrounding future expectations generally, and also may materially differ from the Company's actual future experience. The Company's business, operations and financial performance are subject to certain risks and uncertainties which could result in material differences in actual results from the Company's current expectations. These risks and uncertainties include, but are not limited to, general economic conditions, demand for the Company's products, competitive and technological developments, foreign currency fluctuations, Year 2000 compliance issues and costs of operations. 10 1998 STRATTEC ANNUAL REPORT CONSOLIDATED STATEMENTS OF INCOME (IN THOUSANDS) 13
Years Ended ------------------------------------------------- June 28, 1998 June 29, 1997 June 30, 1996 ------------- ------------- ------------- NET SALES $186,805 $159,054 $139,745 Cost of goods sold 146,865 125,735 110,514 -------- -------- -------- GROSS PROFIT 39,940 33,319 29,231 Engineering, selling, and administrative expenses 18,925 17,684 16,632 -------- -------- -------- INCOME FROM OPERATIONS 21,015 15,635 12,599 Interest income 351 4 22 Interest expense (19) (214) (363) Other income, net 73 125 286 -------- -------- -------- INCOME BEFORE PROVISION FOR INCOME TAXES 21,420 15,550 12,544 Provision for income taxes 7,931 5,730 4,830 -------- -------- -------- NET INCOME $13,489 $9,820 $7,714 ======== ======== ======== EARNINGS PER SHARE: BASIC $2.36 $1.72 $1.33 ======== ======== ======== DILUTED $2.30 $1.70 $1.32 ======== ======== ========
The accompanying notes are an integral part of these consolidated statements. 11 1998 STRATTEC ANNUAL REPORT CONSOLIDATED BALANCE SHEETS (IN THOUSANDS) 14
June 28, 1998 June 29, 1997 ------------- ------------- ASSETS CURRENT ASSETS Cash and cash equivalents $14,754 $404 Receivables, less allowance for doubtful accounts of $250 at June 28, 1998, and June 29, 1997 25,301 29,687 Inventories 14,962 14,879 Customer tooling in progress 8,692 6,615 Future income tax benefits 2,218 1,868 Other current assets 2,131 2,522 -------- ------- Total current assets 68,058 55,975 DEFERRED INCOME TAXES - 186 PROPERTY, PLANT, AND EQUIPMENT, NET 39,940 39,508 -------- ------- $107,998 $95,669 ======== ======= LIABILITIES AND SHAREHOLDERS' EQUITY CURRENT LIABILITIES: Accounts payable $12,457 $12,367 Accrued liabilities: Payroll and benefits 8,170 6,523 Environmental 2,873 2,911 Income taxes 307 452 Other 1,298 1,323 -------- ------- Total current liabilities 25,105 23,576 DEFERRED INCOME TAXES 357 - BORROWINGS UNDER REVOLVING CREDIT FACILITY - 5,037 ACCRUED PENSION OBLIGATIONS 8,289 7,461 ACCRUED POSTRETIREMENT OBLIGATIONS 3,849 3,502 SHAREHOLDERS' EQUITY Common stock, authorized 12,000,000 shares $.01 par value, issued 5,877,150 shares at June 28, 1998, and 5,799,150 shares at June 29, 1997 59 58 Capital in excess of par value 42,489 41,094 Retained earnings 32,436 18,947 Cumulative translation adjustments (1,863) (1,863) Less: Treasury stock, at cost (152,307 shares at June 28, 1998 and 132,000 shares at June 29, 1997) (2,723) (2,143) -------- ------- Total shareholders' equity 70,398 56,093 -------- ------- $107,998 $95,669 ======== =======
The accompanying notes are an integral part of these consolidated balance sheets. 12 1998 STRATTEC ANNUAL REPORT CONSOLIDATED STATEMENTS OF CHANGES IN EQUITY (IN THOUSANDS) 15
Capital in Cumulative Common Excess of Retained Translation Treasury Stock Par Value Earnings Adjustments Stock ------ --------- -------- ----------- -------- BALANCE, JULY 2, 1995 $58 $40,909 $1,413 $(1,437) - Net income - - 7,714 - - Translation adjustments - - - (359) - ---- -------- -------- --------- -------- BALANCE, JUNE 30, 1996 58 40,909 9,127 (1,796) - Net income - - 9,820 - - Translation adjustments - - - (67) - Purchase of common stock - - - - (2,143) Exercise of stock options, including tax benefit - 185 - - - ---- -------- -------- --------- -------- BALANCE, JUNE 29, 1997 58 41,094 18,947 (1,863) (2,143) Net income - - 13,489 - - Purchase of common stock - - - - (591) Exercise of stock options, including tax benefit 1 1,395 - - 11 ---- -------- -------- --------- -------- BALANCE, JUNE 28, 1998 $59 $42,489 $32,436 $(1,863) $(2,723) ==== ======== ======== ========= ========
The accompanying notes are an integral part of these consolidated statements. 13 1998 STRATTEC ANNUAL REPORT CONSOLIDATED STATEMENTS OF CASH FLOWS (IN THOUSANDS) 16
Years Ended --------------------------------------------- June 28, 1998 June 29, 1997 June 30,1996 ------------- ------------- ------------ CASH FLOWS FROM OPERATING ACTIVITIES Net Income $13,489 $9,820 $7,714 Adjustments to reconcile net income to net cash provided by operating activities: Depreciation 6,776 5,639 3,961 Loss on disposition of property, plant and equipment 168 171 254 Change in operating assets and liabilities: (Increase) decrease in receivables 4,330 (10,897) (3,367) Increase in inventories (83) (1,473) (3,497) (Increase) decrease in other assets (1,891) 1,421 (2,211) Increase in accounts payable and accrued liabilities 3,216 1,459 4,128 Other, net (54) (50) (116) ------ ------- ------- Net cash provided by operating activities 25,951 6,090 6,866 ------ ------- ------- CASH FLOWS FROM INVESTING ACTIVITIES Additions to property, plant and equipment (7,450) (7,972) (12,177) Proceeds received on sale of property, plant, and equipment 70 196 60 ------ ------- ------- Net cash used in investing activities (7,380) (7,776) (12,117) ------ ------- ------- CASH FLOWS FROM FINANCING ACTIVITIES Net proceeds from (payments of) borrowings under revolving credit facility (5,037) 3,607 1,430 Purchase of common stock (591) (2,143) - Exercise of stock options 1,407 185 - ------ ------- ------- Net cash provided by (used in) financing activities (4,221) 1,649 1,430 ------ ------- ------- NET INCREASE (DECREASE) IN CASH AND CASH EQUIVALENTS 14,350 (37) (3,821) CASH AND CASH EQUIVALENTS Beginning of year 404 441 4,262 ------ ------- ------- End of year $14,754 $404 $441 ======= ======= ======= SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION Income taxes paid $7,482 $4,984 $6,422 Interest paid 19 227 355
The accompanying notes are an integral part of these consolidated statements. 14 1998 STRATTEC ANNUAL REPORT NOTES TO FINANCIAL STATEMENTS 17 ORGANIZATION AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES STRATTEC SECURITY CORPORATION (the "Company") designs, develops, manufacturers and markets mechanical locks, electro-mechanical locks and related security products for major automotive manufacturers. The significant accounting policies followed by the Company in the preparation of these financial statements, as summarized in the following paragraphs, are in conformity with generally accepted accounting principles. PRINCIPLES OF CONSOLIDATION AND PRESENTATION: The accompanying financial statements reflect the consolidated results of the company, its wholly owned Mexican subsidiary, and its foreign sales corporation. Certain amounts previously reported have been reclassified to conform to the June 28, 1998, presentation. These reclassifications have no effect on previously reported net income or retained earnings. FISCAL YEAR: The Company's fiscal year ends on the Sunday nearest June 30. USE OF ESTIMATES: The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, disclosure of contingent assets and liabilities at the date of the financial statements, and the reported amounts of revenues and expenses during the reporting periods. Actual results could differ from those estimates. FAIR VALUE OF FINANCIAL INSTRUMENTS: The fair value of financial instruments does not materially differ from their carrying values. CASH AND CASH EQUIVALENTS: Cash and cash equivalents include all short-term investments with an original maturity of three months or less. INVENTORIES: Inventories are stated at cost, which does not exceed market. The last-in, first-out (LIFO) method was used for determining the cost of the inventories at the end of each period. Inventories consist of the following (thousands of dollars):
June 28, June 29, 1998 1997 -------- -------- Finished products $5,114 $3,599 Work in process 11,204 12,446 Raw materials 1,179 1,671 LIFO adjustment (2,535) (2,837) ------- -------- $14,962 $14,879 ======= ========
CUSTOMER TOOLING IN PROGRESS: The Company accumulates its costs for development of certain tooling used in component production and assembly. The costs, which are primarily from third-party tool vendors, are accumulated on the Company's balance sheet. These amounts are then billed to the customer upon formal acceptance by the customer of products produced with the individual tool. PROPERTY, PLANT, AND EQUIPMENT: Property, plant, and equipment are stated at cost, and depreciation is computed using the straight-line method over the following estimated useful lives: Classification Expected Useful Lives -------------- --------------------- Land improvements 20 years Buildings and improvements 20 to 35 years Machinery and equipment 3 to 10 years Property, plant, and equipment consist of the following (thousands of dollars):
June 28, June 29, 1998 1997 --------- -------- Land $855 $801 Buildings and improvements 9,819 9,551 Machinery and equipment 64,523 58,771 -------- -------- 75,197 69,123 Less: accumulated depreciation (35,257) (29,615) -------- -------- $ 39,940 $ 39,508 ======== ========
Expenditures for repairs and maintenance are charged to expense as incurred. Expenditures for major renewals and betterments, which significantly extend the useful lives of existing plant and equipment, are capitalized and depreciated. Upon retirement or disposition of plant and equipment, the cost and related accumulated depreciation are removed from the accounts and any resulting gain or loss is recognized in income. RESEARCH AND DEVELOPMENT COSTS: Expenditures relating to the development of new products and processes, including significant improvements and refinements to existing products, are expensed as incurred. FOREIGN CURRENCY TRANSLATION: Since December 30, 1996, the functional currency of the Mexican operation has been the U.S. Dollar, as Mexico is currently considered to be a highly inflationary economy in accordance with 15 1998 STRATTEC ANNUAL REPORT NOTES TO FINANCIAL STATEMENTS 18 Statement of Financial Accounting Standard (SFAS) No. 52, "Foreign Currency Translation." The effect of currency fluctuations in the remeasurement process is included in the determination of income. The effect of currency fluctuations included in the determination of income is not material. Prior to December 30, 1996, the functional currency of the Mexican operation was the Mexican Peso. The effects of currency fluctuations resulted in adjustments to the U.S. dollar value of the Company's assets and to the equity accounts in accordance with SFAS No. 52. REVENUE RECOGNITION: Revenue is recognized upon the shipment of products, net of estimated costs of returns and allowances. COMPREHENSIVE INCOME: SFAS No. 130, "Reporting Comprehensive Income," was issued in 1997. This statement establishes standards for reporting and display of comprehensive income and its components in a complete set of financial statements. Comprehensive net income is the total of reported net income and all other revenues, expenses, gains and losses that under generally accepted accounting principles are not includable in reported net income but are reflected in shareholders' equity. The Company will adopt this statement in fiscal 1999. The Company does not expect adoption to have a material effect on the consolidated financial statements. SEGMENT REPORTING: SFAS No. 131, "Disclosures about segments of an Enterprise and Related Information," was issued in 1997. This statement establishes standards for the manner in which public business enterprises report information about operating segments in annual financial statements and requires that those enterprises report selected information about operating segments in interim financial reports. It also establishes standards for related disclosures about products and services, geographic areas, and major customers. SFAS No. 131 is effective for financial statements for fiscal years beginning after December 13, 1997. Since the Company operates in a single business segment, this Statement will have no impact on future reporting requirements of the Company. DERIVATIVE INSTRUMENTS: SFAS No. 133, "Accounting of Derivative Instruments and Hedging Activities," was issued in 1998. The statement establishes accounting and reporting standards requiring that every derivative instrument be recorded in the balance sheet as either an asset or liability measured at its fair value. SFAS No. 133 is effective for financial statements for fiscal years beginning after June 15, 1999. The Company currently does not hold any such derivative instruments and does not expect this statement to have an impact on future financial statements. REVOLVING CREDIT FACILITY The Company has a $25 million unsecured, revolving credit facility (the "Credit Facility"), which expires October 31, 2000. Interest on borrowings under the Credit Facility are at varying rates based, at the Company's option, on the London Interbank Offering Rate, the Federal Funds Rate, or the bank's prime rate. There were no outstanding borrowings at June 28, 1998. Outstanding borrowings were $5,037,000 under the Credit Facility at and June 29, 1997. The weighted average interest rate on the revolving credit borrowings was 6.2 percent and 6.0 percent for the years ended June 28, 1998, and June 29, 1997, respectively. The Credit Facility contains various restrictive covenants that require the Company to maintain minimum levels for certain financial ratios, including tangible net worth, ratio of indebtedness to tangible net worth and fixed charge coverage. ENVIRONMENTAL MATTER In 1995, the Company recorded a provision of $3.0 million for estimated costs to remediate a site at the Company's Milwaukee facility that was contaminated by a solvent spill which occurred in 1985. The Company continues to monitor and evaluate the site and believes, based upon findings-to-date and known environmental regulations, that the environmental reserve at June 28, 1998, is adequate. INCOME TAXES The provision for income taxes consists of the following (thousands of dollars):
1998 1997 1996 ----------------------------------- Currently payable: Federal $5,576 $4,469 $3,883 State 1,323 1,037 861 Foreign 471 43 319 ------ ------ ------ 7,370 5,549 5,063 Deferred taxes 561 181 (233) ------ ------ ------ $7,931 $5,730 $4,830 ====== ====== ======
16 1998 STRATTEC ANNUAL REPORT NOTES TO FINANCIAL STATEMENTS (CONTINUED) 19 A reconciliation of the US statutory tax rates to the effective tax rates follows:
1998 1997 1996 -------------------------------- US statutory rate 34.8% 34.4% 34.2% State taxes, net of federal tax benefit 4.4 4.4 4.3 Foreign rate differential .4 (.8) .4 Other (2.6) (1.2) (.4) ---- ---- ---- 37.0% 36.8% 38.5% ==== ==== ====
The components of deferred tax assets and liabilities are as follows (thousands of dollars):
June 28, June 29, 1998 1997 -------- -------- Future income tax benefits: Customer tooling $156 $156 Payroll-related accruals 410 410 Environmental reserve 1,121 1,136 Other 531 166 ------ ------ $2,218 $1,868 ====== ====== Deferred income taxes: Accrued pension obligations $3,233 $2,910 Accumulated depreciation (5,091) (4,116) Postretirement obligations 1,501 1,366 Other - 26 ------ ------ ($ 357) $186 ====== ======
Foreign income before the provision for income taxes was not significant for each of the years indicated. RETIREMENT PLANS AND POSTRETIREMENT COSTS The Company has a noncontributory deferred benefit pension plan covering substantially all U.S. associates. Benefits are based on years of service and final average compensation. The Company's policy is to fund at least the minimum actuarially computed annual contribution required under the Employee Retirement Income Security Act of 1974 (ERISA). Plan assets consist primarily of listed equity and fixed income securities. The following tables summarize the plan's income and expense, actuarial assumptions, and funded status for the years indicated (thousands of dollars):
1998 1997 1996 ---- ---- ---- INCOME AND EXPENSE: Service cost-benefits earned during the year $1,206 $1,205 $1,057 Interest cost on projected benefit obligation 1,664 1,631 1,451 Actual return on plan assets (4,585) (3,138) (2,608) Net amortization and deferral 2,566 1,428 1,028 ----- ----- ----- Net periodic pension expense $851 $1,126 $928 ====== ====== ====== 1998 1997 ---- ---- FUNDED STATUS: Actuarial present value of benefit obligations: Vested $16,713 $13,187 Nonvested 2,270 1,946 ------- ------- Accumulated benefit obligation 18,983 15,133 Effect of projected future compensation increases 7,206 6,492 ------- ------- Projected benefit obligation 26,189 21,625 Plan assets at fair market value 26,364 22,194 -------- ------- Plan assets greater than projected benefit obligation 175 569 Remaining unrecognized net asset arising from the initial application of SFAS No. 87 947 1,096 Unrecognized net gain 7,535 6,885 Unrecognized prior service cost (18) 49 -------- ------- Accrued pension obligation $8,289 $7,461 ======== ======= 1998 1997 ACTUARIAL ASSUMPTIONS: -------- ------ Discount rate used to determine present value of projected benefit obligation 7.5% 7.75% Expected rate of future compensation increases 4.0% 4.0% Expected long-term rate of return on plan assets 8.5% 8.5%
17 NOTES TO FINANCIAL STATEMENTS 1998 STRATTEC ANNUAL REPORT 20 All U.S. associates of the Company may participate in a 401(K) Plan. The Company contributes a fixed percentage of up to the first 6 percent of eligible compensation that a participant contributes to the plan. The Company's contributions totaled approximately $548,000 in 1998, $487,000 in 1997 and $359,000 in 1996. The Company recognizes the expected cost of retiree health care and life insurance benefits during the years that the associates render service. For measurement purposes, a 6.5 percent annual rate of increase in the per capita cost of covered health care benefits was assumed for 1998; the rate was assumed to decrease to 6 percent by the year 1999 and remain at that level thereafter. The discount rate used in determining the accumulated postretirement benefit obligations was 7.5 percent at June 28, 1998, and 7.75 percent at June 29, 1997, compounded annually. The health care and life insurance plans are unfunded. The components of the accumulated postretirement benefit obligations were as follows (thousands of dollars):
June 28, June 29, 1998 1997 -------- ------- Retirees $ 548 $ 225 Fully eligible plan participants 570 435 Other active participants 2,763 2,432 -------- ------- 3,881 3,092 Unrecognized net obligations (8) (9) Unrecognized prior service cost (274) - Unrecognized net gain 250 419 -------- ------- $ 3,849 $ 3,502 ======== =======
The net periodic postretirement costs recorded during 1998, 1997, and 1996 were as follows (thousands of dollars):
1998 1997 1996 ---- ---- ---- Service cost-benefits attributed to service during the year $169 $153 $173 Interest cost on accumulated benefit obligation 238 215 221 Other (8) (7) 1 ---- ---- ---- $399 $361 $395 ==== ==== ====
The health care cost trend assumption has a significant effect on the amounts reported. A 1% change in the health care cost trend rates would have the following effects (thousands of dollars): 1% 1% Increase Decrease -------- -------- Effect on total of service and interest cost components $82 ($68) Effect on Postretirement benefit obligation $556 ($468) SHAREHOLDERS' EQUITY The Company has 12,000,000 shares of authorized common stock, par value $.01 per share, with 5,724,843 and 5,667,150 shares issued and outstanding at June 28, 1998, and June 29, 1997, respectively. Holders of Company common stock are entitled to one vote for each share on all matters voted on by shareholders. On February 27, 1995, one common stock purchase right (a "right") was distributed for each share of the Company's common stock outstanding. The rights are not currently exercisable, but would entitle shareholders to buy one-half of one share of the Company's common stock at an exercise price of $30 per share if certain events occurred relating to the acquisition or attempted acquisition of 20 percent or more of the outstanding shares. The rights expire in the year 2005, unless redeemed or exchanged by the Company earlier. During fiscal 1997 the Company's Board of Directors authorized a stock repurchase program to buy back up to 289,395 outstanding shares. As of June 28, 1998, 153,000 shares have been purchased at a cost of $2,734,000. 18 1998 STRATTEC ANNUAL REPORT NOTES TO FINANCIAL STATEMENTS (CONTINUED) 21 EARNINGS PER SHARE (EPS) In the second quarter of fiscal 1998, the Company adopted SFAS No. 128, "Earnings Per Share." The Company's previously reported EPS is consistent with basic EPS as calculated below under SFAS No. 128. A reconciliation of the components of the basic and diluted per share computations follows (thousands of dollars, except per share amounts):
Net Per-Share Income Shares Amount ------ ------ ------ 1998 ---------------------------------- Basic EPS $ 13,489 5,708 $2.36 Stock Options 155 ----- ----- Diluted EPS $ 13,489 5,863 $2.30 ===== ===== 1997 --------------------------------- Basic EPS $ 9,820 5,716 $1.72 Stock Options 69 ----- ----- Diluted EPS $ 9,820 5,785 $1.70 ===== ===== 1996 --------------------------------- Basic EPS $ 7,714 5,785 $1.33 Stock Options 66 ----- Diluted EPS $ 7,714 5,851 $1.32 ===== =====
Options to purchase the following shares of common stock were outstanding as of each date indicated but were not included in the computation of diluted EPS because the options' exercise prices were greater than the average market price of the common shares:
Exercise Shares Price ------ ------- June 28, 1998 80,000 $31.98 5,000 $31.63 June 29, 1997 76,393 $19.28 77,135 $19.68 June 30, 1996 76,393 $19.28
STOCK OPTION AND PURCHASE PLANS The Company maintains an omnibus stock incentive plan, which provides for the granting of stock options. The Board of Directors has designated 1,200,000 shares of the Company's common stock available for grant under the plan at a price not less than the fair market value on the date the option is granted. Options become exercisable as determined at the date of grant by a committee of the Board of Directors and expire 5 to 10 years after the date of grant unless an earlier expiration date is set at the time of grant.
Weighted Average Exercise Shares Price ------- -------- Balance as of July 2, 1995 382,500 $11.75 Granted 96,393 $18.57 Terminated 7,500 $11.75 ------- Balance as of June 30, 1996 471,393 $13.15 ------- Granted 157,135 $18.17 Exercised 13,750 $11.75 Terminated 15,889 $15.01 ------ Balance June 29, 1997 598,889 $14.45 ------- Granted 95,000 $31.06 Exercised 78,000 $12.67 ------- Balance at June 28, 1998 615,889 $17.23 ======= Exercisable as of June 28, 1998 340,750 $12.37 ======= Available for grant as of June 28, 1998 492,361 =======
During 1997, the Company adopted SFAS No. 123, "Accounting for Stock-Based Compensation." As permitted by the statement, the Company will continue to account for its stock-based compensation plans in accordance with APB Opinion No. 25 and related Interpretations. Accordingly, no compensation cost related to these plans was charged against earnings in 1998, 1997, and 1996. Had compensation cost for these plans been determined consistent with SFAS No. 123, the pro forma impact on earnings per share would have been as follows (thousands of dollars):
June 28, June 29, June 30, 1998 1997 1996 -------- -------- -------- Net income As reported $ 13,489 $ 9,820 $ 7,714 Pro forma $ 13,057 $ 9,655 $ 7,649 Basic earnings per share As reported $ 2.36 $ 1.72 $ 1.33 Pro forma $ 2.29 $ 1.69 $ 1.33 Diluted earnings per share As reported $ 2.30 $ 1.70 $ 1.32 Pro forma $ 2.24 $ 1.69 $ 1.32
The fair market value of each option grant was estimated as of the date of grant using the Black-Scholes pricing model. The resulting compensation cost was amortized over the vesting period. 19 1998 STRATTEC ANNUAL REPORT NOTES TO FINANCIAL STATEMENTS (Continued) 22 The grant date fair market values and assumptions used to determine such impact are as follows:
Options Granted During 1998 1997 1996 ---- ---- ---- Weighted average grant date fair value $ 31.06 $18.17 $18.57 Assumptions: Risk free interest rates 6.07% 6.54% 6.01% Expected volatility 30.10% 32.11% 27.98% Expected term (in years) 5.75 5.5 5.75
The range of options outstanding as of June 28, 1998, is as follows:
Weighted Weighted Average Number of Average Remaining Options Exercise Price Contractual Price Range Outstanding/ Outstanding/ Life per Share Exercisable Exercisable (in years) - ----------- ------------ -------------- ---------- $11.75-$17.05 370,750/340,750 $12.78/$12.40 7.1 $19.28-$23.63 160,139/ - $19.73/ - 3.1 Over $31.63 85,000/ - $31.96/ - 4.5 --------------- ------------- --- 615,889/340,750 $17.23/$12.40 5.7 =============== ============= ===
Effective February 18, 1998, the Company adopted an Employee Stock Purchase plan to provide substantially all U. S. full-time associates an opportunity to purchase shares of its common stock through payroll deductions. A participant may contribute a maximum of $5,200 per calendar year to the plan. On the last day of each month, participant account balances are used to purchase shares of stock at the average of the highest and lowest reported sales prices of a share of the Company's common stock on the NASDAQ National Market. A total of 100,000 shares may be issued under the plan. A total of 693 shares were issued from treasury stock under the plan at an average price of $29.93 during fiscal 1998. A total of 99,307 shares are available for purchase under the plan as of June 28, 1998. EXPORT SALES Export sales are summarized below thousands of dollars): Export Sales Percent of Net Sales ------------ -------------------- 1998 $22,330 12% 1997 $17,179 11% 1996 $14,713 11% These sales were primarily to vehicle manufacturing plants in Canada and Mexico. SALES TO LARGEST CUSTOMERS Sales to the Company's largest customers were as follows (thousands of dollars and percent of total net sales):
1998 1997 1996 Sales % Sales % Sales % ------------- ------------- ------------ General Motors Corporation $ 86,721 46% $ 70,347 44% $ 65,441 47% Ford Motor Company 46,136 25% 43,617 27% 27,977 20% Chrysler Corporation 25,966 14% 21,000 13% 20,318 15% ------------ ------------- ------------ $158,823 85% $134,964 85% $113,736 82% ============ ============= ============
20 1998 STRATTEC ANNUAL REPORT REPORT OF INDEPENDENT PUBLIC ACCOUNTANTS/REPORT OF MANAGEMENT 23 TO THE BOARD OF DIRECTORS AND SHAREHOLDERS OF STRATTEC SECURITY CORPORATION: We have audited the accompanying consolidated balance sheets of STRATTEC SECURITY CORPORATION and subsidiaries, as of June 28, 1998, and June 29, 1997, and the related consolidated statements of income, changes in equity and cash flows for each of the three years in the period ended June 28, 1998. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits. We conducted our audits in accordance with generally accepted auditing standards. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion. In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of STRATTEC SECURITY CORPORATION and subsidiaries as of June 28, 1998, and June 29, 1997, and the results of their operations and their cash flows for each of the three years in the period ended June 28, 1998, in conformity with generally accepted accounting principles. ARTHUR ANDERSEN LLP ARTHUR ANDERSEN LLP Milwaukee, Wisconsin July 30, 1998 REPORT OF MANAGEMENT The management of STRATTEC SECURITY CORPORATION is responsible for the fair presentation and integrity of the financial statements and other information contained in this Annual Report. We rely on a system of internal financial controls to meet the responsibility of providing financial statements. The system provides reasonable assurances that assets are safeguarded, that transactions are executed in accordance with management's authorization and that the financial statements are prepared in accordance with generally accepted accounting principles, including amounts based upon management's best estimates and judgments. The financial statements for each of the years covered in this Annual Report have been audited by independent auditors, who have provided an independent assessment as to the fairness of the financial statements. The Audit Committee of the Board of Directors meets with management and the independent auditors to review the results of their work and to satisfy itself that their responsibilities are being properly discharged. The independent auditors have full and free access to the Audit Committee and have discussions with the committee regarding appropriate matters, with and without management present. Harold M. Stratton II John G. Cahill Harold M. Stratton II John G. Cahill President and Executive Vice President and Chief Executive Officer Chief Financial Officer 21 1998 STRATTEC ANNUAL REPORT FINANCIAL SUMMARY 24 FIVE-YEAR FINANCIAL SUMMARY For all periods after February 26, 1995, the financial data reflect the consolidated results of the Company and its wholly owned subsidiaries. For all periods prior to February 27, 1995, the financial data reflect the combined results of the Technologies Business of Briggs & Stratton Corporation ("Briggs"). On February 27, 1995 Briggs transferred substantially all of the assets, related debt and liabilities of its Technologies Business to the Company, which was previously formed as a wholly owned subsidiary of Briggs in order to receive the distribution (the "Distribution"). The information below should be read in conjunction with "Management's Discussion and Analysis," and the Financial Statements and Notes thereto included elsewhere herein. The following data are in thousands of dollars except per share amounts.
Fiscal Years 1998 1997 1996 1995 1994 ---------- ---------- ------------- ----------- ---------- INCOME STATEMENT DATA Net sales $ 186,805 $ 159,054 $ 139,745 $ 110,372 $ 97,077 Gross profit 39,940 33,319 29,231 27,893 23,248 Engineering, selling, and administrative expenses 18,925 17,684 16,632 13,847 8,915 Environmental charges - - - 3,000 1,250 --------- --------- --------- --------- --------- Income from operations 21,015 15,635 12,599 11,046 13,083 Interest income 351 4 22 16 - Interest expense (19) (214) (363) (12) - Other income, net 73 125 286 83 68 --------- --------- --------- --------- --------- Income before taxes and cumulative effect of accounting changes 21,420 15,550 12,544 11,133 13,151 Provision for income taxes 7,931 5,730 4,830 4,657 5,330 --------- --------- --------- --------- --------- Net income before cumulative effect of accounting changes 13,489 9,820 7,714 6,476 7,821 Cumulative effect of accounting changes - - - - (3,024) --------- --------- --------- --------- --------- Net income $ 13,489 $ 9,820 $ 7,714 $ 6,476 $ 4,797 ========= ========= ========= ========= ========= Earnings per share (a): Basic $ 2.36 $ 1.72 $ 1.33 - - Diluted $ 2.30 $ 1.70 $ 1.32 - - BALANCE SHEET DATA Net working capital $ 42,953 $ 32,399 $ 21,181 $ 18,978 $ 13,714 Total assets 107,998 95,669 82,818 70,103 49,496 Long-term liabilities 12,138 16,000 10,937 8,198 6,212 Equity 70,398 56,093 48,298 40,943 28,379
(a)Earnings per share is presented for fiscal years subsequent to the Distribution. QUARTERLY FINANCIAL DATA (UNAUDITED)
Market Price Earnings Per Share Per Share Net ------------------- ------------- Quarter Net Sales Gross Profit Income Basic Diluted High Low ------- --------- ------------ ------ ----- ------- ---- --- 1998 First $ 42,868 $ 8,488 $ 2,398 $ .42 $ .41 28 1/4 19 1/2 Second 49,722 10,142 3,433 .60 .59 30 1/4 23 Third 47,420 10,623 3,835 .67 .65 29 1/4 25 Fourth 46,795 10,687 3,823 .67 .65 33 1/4 27 --------- --------- --------- --------- ------ TOTAL $ 186,805 $ 39,940 $ 13,489 $ 2.36 $ 2.30 ========= ========= ========= ========= ====== 1997 First $ 36,214 $ 6,253 $ 1,201 $ .21 $ .21 18 1/2 13 3/4 Second 37,926 8,528 2,598 .45 .45 18 1/2 14 1/2 Third 41,836 9,036 2,902 .51 .50 19 3/4 16 Fourth 43,078 9,502 3,119 .55 .54 21 16 1/2 --------- --------- --------- --------- ------ TOTAL $ 159,054 $ 33,319 $ 9,820 $ 1.72 $ 1.70 ========= ========= ========= ========= ======
Shareholders of record at June 28, 1998, were 5,010.
   1
                    CONSENT OF INDEPENDENT PUBLIC ACCOUNTANTS



As independent public accountants, we hereby consent to the incorporation by
reference in this Form 10-K of our report dated July 30, 1998, included in the
1998 Annual Report to Shareholders of STRATTEC SECURITY CORPORATION.

We also consent to the incorporation of our reports included (or incorporated by
reference) in this Form 10-K into the Company's previously filed Registration
Statement on Form S-8 (File No. 333-4300 and File No. 333-45221).



ARTHUR ANDERSEN LLP


Milwaukee, Wisconsin,
September 9, 1998.

 

5 1,000 YEAR JUN-28-1998 JUN-30-1997 JUN-28-1998 14,754 0 25,551 250 14,962 68,058 75,197 35,257 107,998 25,105 0 0 0 59 70,339 107,998 186,805 186,805 146,865 146,865 0 0 19 21,420 7,931 13,489 0 0 0 13,489 2.36 2.30
 

5 1,000 YEAR JUN-29-1997 JUL-1-1996 JUN-29-1997 404 0 29,937 250 14,879 55,975 69,123 29,615 95,669 23,576 5,037 0 0 58 56,035 95,669 159,054 159,054 125,735 125,735 0 0 214 15,550 5,730 9,820 0 0 0 9,820 1.72 1.70