UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

☒ Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the fiscal year ended June 30, 2024.

☐ Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

Commission File Number 0-25150

STRATTEC SECURITY CORPORATION

(Exact name of registrant as specified in its charter)

3333 West Good Hope Road, Milwaukee, WI 53209

(Address of principal executive offices)

Registrant’s telephone number, including area code: (414) 247-3333

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ☐Yes ☒No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. ☐Yes ☒No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ☒Yes ☐No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). ☒Yes ☐No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.:

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management's assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the Registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the Registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). ☐Yes ☒No

The aggregate market value of the voting Common Stock held by non-affiliates of the registrant as of December 29, 2023 (the last business day of the Registrant’s most recently completed second quarter), was approximately $96,493,000 (based upon the last reported sale price of the Common Stock at December 29, 2023 on the NASDAQ Global Market). Shares of common stock held by any executive officer or director of the registrant have been excluded from this computation because such persons may be deemed to be affiliates. This determination of affiliate status is not a conclusive determination for other purposes.

On August 2, 2024, there were outstanding 4,068,052 shares of the Registrant’s $.01 par value Common Stock (which includes any unvested restricted shares previously awarded).

STRATTEC SECURITY CORPORATION

ANNUAL REPORT IN FORM 10-K

June 30, 2024

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

A number of the matters and subject areas discussed in this Form 10-K as well as in portions of the Company’s Proxy Statement, dated September 20, 2024, which is incorporated herein by reference, contain “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. These statements may be identified by the use of forward-looking words or phrases such as “anticipate,” “believe,” “would,” “expect,” “intend,” “may,” “planned,” “potential,” “should,” “will” and “could,” or the negative of these terms or words of similar meaning. These statements include expected future financial results, product offerings, global expansion, liquidity needs, financing ability, planned capital expenditures, management’s or the Company’s expectations and beliefs, and similar matters discussed, or otherwise incorporated herein by reference, in this Form 10-K. The discussions of such matters and subject areas are qualified by the inherent risks and uncertainties surrounding future expectations generally, and also may materially differ from the Company’s actual future experience.

The Company’s business, operations and financial performance are subject to certain risks and uncertainties, which could result in material differences in actual results from the Company’s current expectations. These risks and uncertainties include, but are not limited to, general economic conditions, in particular relating to the automotive industry, consumer demand for the Company’s and its customers’ products, competitive and technological developments, customer purchasing actions, changes in warranty provisions and customers' product recall policies, work stoppages at the Company or at the location of its key customers as a result of labor disputes, foreign currency fluctuations, uncertainties stemming from U.S. trade policies, tariffs and reactions to same from foreign countries, delays and restrictions impacting the import of goods and components stemming from heightened security procedures implemented by the U.S. government related to U.S.-Mexico border crossings, the volume and scope of product returns or customer cost reimbursement actions, changes in the costs of operations, warranty claims, adverse business and operational issues resulting from any material global supply chain and logistics disruption, the ongoing and lingering effects of the semiconductor chip supply shortages, matters adversely impacting the timing, availability and cost of material component parts and raw materials for the production of our products and the products of our customers, or the continuation or worsening thereof, matters related to the pricing actions implemented by the Company and customer responses and concessions related to the same, and other matters described under “Risk Factors” in Part I, Item 1A of this report.

Shareholders, potential investors and other readers are urged to consider these factors carefully in evaluating the forward-looking statements and are cautioned not to place undue reliance on such forward-looking statements. The forward-looking statements made herein are only made as of the date of this Form 10-K and the Company undertakes no obligation to publicly update such forward-looking statements to reflect subsequent events or circumstances occurring after the date of this Form 10-K.

PART I

ITEM 1. BUSINESS

Basic Business

STRATTEC SECURITY CORPORATION designs, develops, manufactures and markets automotive security, access control, and user interface controls products and solutions. This includes mechanical locks and keys, electronically enhanced locks and keys, passive entry passive start systems (PEPS), phone as a key systems (Paak), steering column and instrument panel ignition lock housings, latches, power sliding side door systems, power tailgate systems, power lift gate systems, power deck lid systems, door handles, steering wheel switches and controller, E-shifters, paddle switches and related products for primarily North American automotive customers. We also previously supplied global automotive manufacturers through a strategic relationship with WITTE Automotive (“WITTE”) of Velbert, Germany and ADAC Plastics Inc. (doing business as ADAC Automotive (“ADAC”), of Grand Rapids, Michigan) called Vehicle Access Systems Technology LLC ("VAST LLC"), doing business as the VAST Automotive Group (“VAST”). Under this unique strategic relationship, STRATTEC, WITTE and ADAC marketed the products of each company to global customers under the “VAST Automotive Group” brand name. Effective as of June 30, 2023, STRATTEC sold its one-third interest in VAST LLC to WITTE. As of the closing of the sale of its VAST LLC interest, STRATTEC entered into a strategic preferred partner relationship with WITTE covering VAST LLC pursuant to the terms of a cooperation framework agreement that enables STRATTEC to continue to market and rely on the global capabilities of VAST LLC. See "VAST, LLC, SPA, LLC and SPA de Mexico Equity Restructuring Agreement" below for additional information regarding the sale of STRATTEC's VAST LLC interest to WITTE. STRATTEC products are shipped to customer locations in the United States, Canada, Mexico, Europe, South America, Korea, and China, and we, along with our partners, provide full service and aftermarket support for each VAST Automotive Group partners’ products.

History

The product line that became STRATTEC was part of Briggs & Stratton Corporation’s founding business in 1908. In 1995, STRATTEC was spun off from Briggs & Stratton through a tax-free distribution to the then-existing Briggs & Stratton shareholders and has been an independent public company for over twenty-nine years.

Our history in the automotive security business spans 116 years. STRATTEC has been the world’s largest producer of automotive locks and keys since the late 1920s, and we currently maintain a significant share of the North American markets for these products.

Products

Our traditional security products are lock sets (locks and keys) for cars and light trucks. Typically, two keys are provided with each vehicle lockset. Most of the vehicles we currently supply are using keys with sophisticated radio frequency identification technology for additional theft prevention. Keys with remote entry devices integrated into a single unit and bladeless electronic keys as well as turn-key PEPS systems have been added to our product line and are gaining in popularity. Paak systems are also gaining in popularity and we will be supplying products for these systems.

Ignition lock housings represent another security product for us. These housings are the mating part for our ignition locks and typically are part of the steering column structure, although there are instrument panel-mounted versions for certain vehicle applications. These housings are either die cast from zinc or injection molded plastic and may include electronic components for theft deterrent systems.

We have developed and are continuing to develop access control products, including trunk latches, lift gate latches, tailgate latches, hood latches, side door latches and related hardware. With our acquisition of Delphi Corporation’s Power Products Group in fiscal 2009, we have been supplying and continue to supply various power access systems for sliding side doors, tailgates, lift gates and trunk lids to our automotive industry customers. Through a joint venture formed with ADAC Automotive during fiscal 2007, we also supply painted and non-painted door handles and components and related vehicle access hardware.

Recently, we also added a new product category in User Interface Controls by developing and putting in production products such as steering switches and its controller, E-shifters and paddle switches.

In recent years, more and more vehicle access systems have moved from purely mechanical components to integrated electro-mechanical systems. STRATTEC has been at the forefront of this new technology, working with Original Equipment Manufacturers’ (OEMs) product development and purchasing groups to provide cost-effective, innovative solutions to the challenges facing our customers.

STRATTEC’s customer-focused structure and formalized product development process helps us identify and meet customer needs in order to support the customer's program milestones. From concept and design, through implementation and into the aftermarket, STRATTEC delivers products that provide the optimum value solution to security, access control and user interface controls requirements. We have a comprehensive Products & Solutions portfolio that can be viewed on our website at www.strattec.com (see “Available Information” below for additional information).

To maintain a strong focus on each of these security, access control and user interface controls products, we have Product Business Managers who oversee the product’s entire life cycle, including product concept, application, manufacturing, warranty analysis, service/aftermarket, and financial/commercial issues. The Product Business Managers work closely with our sales organization, our engineering group, and our manufacturing operations to ensure their products are receiving the right amount of quality attention so that their value to STRATTEC and the marketplace is enhanced.

Markets

We are a direct supplier to OEM automotive and light truck manufacturers as well as other transportation-related manufacturers. Our largest customers are General Motors Company, Ford Motor Company and Stellantis. Our product mix varies by customer, but generally our overall sales tend to be highest in door handles and trim components produced by ADAC-STRATTEC de Mexico, followed by lock and key, including aftermarket produced by STRATTEC de Mexico, power access products produced by STRATTEC Power Access de Mexico, and latch mechanisms and ignition lock housing components produced by STRATTEC de Mexico. See Operations discussion included herein for further description.

Direct sales to various OEMs represented approximately 81 percent and 80 percent of our total sales for fiscal 2024 and 2023, respectively. The remainder of our revenue is primarily through sales to the OEM service channels, the aftermarket and Tier 1 automotive supplier customers, and sales of certain products to non-automotive commercial customers.

Sales to our major automotive customers, both OEM and Tier 1, are coordinated through direct sales personnel located in our Detroit-area office. Sales are also facilitated through daily interaction between our Program Managers, Application Engineers and other product engineering personnel. Sales to other OEM customers are accomplished through a combination of our sales personnel located in Detroit and personnel in our Milwaukee headquarters office.

The majority of our OEM products are sold in North America. While some exporting is done to Tier 1 and directly to automotive assembly plants in Europe, Asia and South America, we have restructured our presence in these markets and elsewhere through our entry into a cooperation framework agreement with WITTE related to the business of VAST LLC as part of our sale of our VAST LLC interest to WITTE under the terms of the Equity Restructuring Agreement. We are also independently evaluating our presence in markets outside of North America through other channels.

OEM service and replacement parts are sold to the OEM’s service operations. In addition, we distribute our components and security products to the automotive aftermarket through authorized wholesale distributors, as well as other marketers and users of component parts, including export customers.

Customer Sales Focus

To bring the proper focus to the relationships with our major customers, we have six customer-focused teams, each with a Director of Sales, Product Business Manager and one or two Engineering Program Managers and various Customer Application Engineers. In addition to customer teams for General Motors, Ford and Stellantis, we currently have teams for New Domestic Vehicle Manufacturers (primarily new EVs, the European, Japanese and Korean automotive manufactures), User Interface Controls customers, Tier 1 customers, and Service and Aftermarket customers. Sales and engineering for ADAC-STRATTEC LLC (described in greater detail below) are supported by our partner in this joint venture, ADAC Automotive.

Each Sales Director is responsible for the overall relationship between STRATTEC and a specific customer group. Product Business Managers and Program Managers are responsible for coordinating cross functional activities while managing new product programs for their customers.

Product Engineering Focus

To best serve our customers’ product needs, STRATTEC’s engineering resources are organized into groups which focus on specific access control applications. We currently have six engineering groups: Locks and Keys, Aftermarket, Latches, Power Access Systems, User Interface Controls and Wireless Systems. Each group has a Product Business Manager, an Engineering Manager and a complement of skilled engineers who design and develop products for specific applications. In doing this, each engineering group works closely with both the customer and product teams, Engineering Program Managers, and Application Engineers.

Underlying this organization is a formalized product development process to identify and meet customer needs in the shortest possible time. By following this streamlined development system, we shorten product lead times, tighten our response to market changes and provide our customers with the optimum value solution to their security, access control and user interface controls requirements. STRATTEC is also IATF 16949:2016 and ISO 14001 certified. This means we embrace the philosophy that quality should exist not only in the finished product, but in every step of our processes as well.

Operations

A significant number of the components that go into our products are manufactured at our headquarters in Milwaukee, Wisconsin. This facility produces zinc die cast components, stampings and milled key blades. We have three owned production facilities currently in operation in Juarez, Mexico operating as STRATTEC de Mexico. Plant No. 1 houses key finishing and assembly operations for locksets, PEPS and Paak components, ignition lock housings, steering wheel switches and its controllers, E-shifters and paddle switches. Plant No. 2 houses our key molding and plastic injection molding operations for door handles and components, as well as containing dedicated space for the assembly operations of ADAC-STRATTEC de Mexico. Plant No. 3 houses both latch and power access assembly operations for STRATTEC Power Access de Mexico. Plant No. 4 is in Leon, Mexico and houses our custom paint system for door handles and assembly for ADAC-STRATTEC de Mexico and is owned by the ADAC-STRATTEC de Mexico joint venture.

STRATTEC de MEXICO

STRATTEC de Mexico is a wholly owned subsidiary of STRATTEC which owns and operates the three production facilities in Juarez, Mexico described above under "Operations". These facilities house our assembly operations for locksets and ignition lock housings, our key finishing and plastic injection molding operations, our assembly operations for ADAC-STRATTEC de Mexico described below and our latch and power access assembly operations for STRATTEC POWER ACCESS de Mexico described below.

Vehicle Access Systems Technology LLC

In fiscal 2001, we entered into an alliance with WITTE-Velbert GmbH, an automotive supplier based in Germany which designs, develops, manufactures and markets automotive access control products for European-based customers. This alliance consisted of two initiatives: a legal arrangement which allowed STRATTEC to manufacture and market WITTE’s core products in North America and WITTE to manufacture and market STRATTEC’s core products in Europe; and a 50:50 joint venture, WITTE-STRATTEC LLC, to invest in operations with local partners in strategic markets outside of Europe and North America.

In February of 2006, we expanded this alliance and related joint venture with the addition of a third partner, ADAC Plastics, Inc., and renamed the resulting joint venture VAST. ADAC, of Grand Rapids, Michigan, added North American expertise in door handles, a part of WITTE’s core product line that STRATTEC did not have, and an expertise in color-matched painting of these components.

ADAC-STRATTEC LLC and ADAC-STRATTEC de MEXICO

During fiscal 2007, we formed a new entity with ADAC Automotive called ADAC-STRATTEC LLC including a wholly owned Mexican subsidiary ADAC-STRATTEC de Mexico (collectively, ASdM). The purpose of this joint venture is to produce certain ADAC and STRATTEC products utilizing ADAC’s plastic molding injection expertise and STRATTEC’s assembly capability. ASdM currently operates out of defined space in STRATTEC de Mexico Plant No. 2 located in Juarez, Mexico. Products from this joint venture include non-painted door handle components and exterior trim components for OEM customers producing in North America. STRATTEC owns 51% of this joint venture and its financial results are consolidated into STRATTEC’s financial statements. ASdM represented $135.9 million and $121.9 million of our consolidated net sales in our fiscal 2024 and 2023, respectively. STRATTEC de Mexico Plant No. 4 is in Leon, Mexico and houses our custom paint system for door handles and assembly for ADAC-STRATTEC de Mexico.

STRATTEC POWER ACCESS LLC and STRATTEC POWER ACCESS de MEXICO

During fiscal year 2009, we formed a new subsidiary with WITTE Automotive called STRATTEC POWER ACCESS LLC (“SPA”) to acquire the North American business of the Delphi Power Products Group. WITTE was a 20 percent minority owner in SPA until June 30, 2023, at which time WITTE sold its minority interest to STRATTEC. See "VAST, LLC, SPA, LLC and SPA de Mexico Equity Restructuring Agreement" below for additional information regarding STRATTEC's purchase of WITTE's interest in SPA. SPA owns 100 percent of a Mexican subsidiary, STRATTEC POWER ACCESS de Mexico. The purpose of this subsidiary is to produce power access devices for sliding side doors, tailgates, lift gates, trunk lids and other related products. STRATTEC POWER ACCESS de Mexico currently operates out of defined space in STRATTEC de Mexico Plant No. 3 located in Juarez, Mexico.

Financial results for SPA are consolidated in STRATTEC’s financial statements. In our fiscal years ending 2024 and 2023, SPA represented $130.3 million and $114.1 million, respectively, of our consolidated net sales.

VAST LLC, SPA LLC and SPA de MEXICO Equity Restructuring Agreement

On June 30, 2023, STRATTEC completed an Equity Restructuring Agreement with WITTE (“Restructuring Agreement”) related to both the VAST LLC and the SPA joint ventures. Prior to the Restructuring Agreement, STRATTEC was a one-third owner of VAST LLC with WITTE and ADAC Plastics, Inc. Under the terms of the Restructuring Agreement, STRATTEC sold its one-third interest in VAST LLC to WITTE for a net purchase price of $18,500,000 which also included STRATTEC acquiring : (1) WITTE's 20% minority interest in SPA; and (2) the net assets of VAST LLC's Korea branch office, which business is operated by a newly registered Korea branch of the Company. As part of the Restructuring Agreement, ADAC Plastics, Inc. took over 100% of VAST Brazil. As of the closing of the Restructuring Agreement, STRATTEC ceased to be an owner of VAST LLC but obtained 100% ownership of SPA.

While the equity ownership in VAST has changed, we expect to continue to leverage the VAST brand and to collaborate on product development and manufacturing capabilities with WITTE and VAST in winning new business and serving global customers. Accordingly, at closing of the Restructuring Agreement, we entered into a cooperation framework agreement with WITTE covering the business of VAST LLC which provides a framework for the parties to collaborate on global programs related to product development and manufacturing. This will enable STRATTEC to supply and deliver global programs by leveraging the VAST global footprint with the added advantage of providing regional support from WITTE’s operating entities in Europe, China and India. We will also jointly, along with ADAC Plastics and WITTE, continue to leverage the sales/engineering offices in Japan, Korea and Brazil. The Restructuring Agreement and cooperation framework agreement position STRATTEC to redeploy assets, both financial and technical, to create greater focus on STRATTEC-specific strategic growth opportunities in North America and around the world. We believe this allows us to be more focused and competitive in this exciting and once-in-a-lifetime restructuring of a major industry where we are well-positioned to take advantage of new opportunities. This includes more of our product applications on Electric Vehicles, growing consumer demand for Power Access products, expansion of electronics capabilities and other new automotive products. It will also give us greater resources to further explore diversification of markets, complimentary technology and regions outside of North America.

ADAC-STRATTEC LLC and ADAC-STRATTEC de MEXICO were unaffected by the Restructuring Agreement. For further information on VAST LLC and the equity restructuring, see "Investment in Joint Ventures and Majority Owned Subsidiaries" and "Equity (Loss) Earnings of Joint Ventures" included in Notes to Financial Statements under Item 8 in this Form 10-K.

Seasonal Nature of the Business

The manufacturing of components used in automobiles is driven by the normal peaks and valleys associated with the automotive industry. Typically, the months of July and August are relatively slow as summer vacation shutdowns and model year changeovers occur at the automotive assembly plants. September volumes increase rapidly as each new model year begins. This volume strength typically continues through October and into early November. As the holiday and winter seasons approach, the demand for automobiles slows, as does production. March usually brings a major sales and production increase, which then continues through most of June. This results in our first fiscal quarter sales and operating results typically being our weakest, with the remaining quarters being more consistent.

Vehicle List

2025 Vehicles

We are proud to be associated with many of the quality vehicles produced in North America and elsewhere.

The following cars and light trucks are equipped with STRATTEC components during our 2025 fiscal year:

* Vehicles produced outside of North America, or both in and outside North America.

EV – Electric Vehicle

PH – Plug-In Hybrid

Emerging Technologies

Automotive vehicle security and access systems, which are both theft deterrent and consumer friendly, are trending toward electro-mechanical, software and connected devices. Electronic companies are developing user identification systems such as bio-systems, card holder (transmitter) systems, etc., while mechanical locks, keys, housings, and latches are evolving to accommodate electronics. We believe we are positioning ourselves as a vehicle security, access control and user interface controls supplier by building our product, engineering and manufacturing expertise in the required electro-mechanical products, which include access systems, latches, keys with remote entry electronic systems, ignition interface systems with passive start and Paak capabilities and various user interface controls technologies. In both 2018 and 2019, we were awarded the Automotive News Pace Award for Excellence and Innovation for our Invis-A-RiseTM Power Liftgate and Invis-A-RiseTM Power Tailgate products. Those technologies continue to enable STRATTEC to provide differentiation in the marketplace. As the automotive industry continues developing various levels of autonomous vehicles, we believe that we are well positioned to continue the development and incorporation of power sliding doors, power tailgates and other consumer convenience features into these types of vehicles.

These technologies benefit us by increasing our potential customer base as a Tier 2 supplier while maintaining our Tier 1 status on some product lines and by adding additional product line availability.

Sources and Availability of Raw Materials

Our primary raw materials are high-grade zinc, brass, nickel silver, steel, aluminum, plastic resins and semiconductor chips and other electronics. These materials are generally available from a number of suppliers, but we have chosen to concentrate our sourcing with one primary vendor for each commodity. We believe our sources for raw materials are very reliable and adequate for our needs. We have not experienced any significant long term supply problems in our operations and do not anticipate any significant supply problems into the foreseeable future. See further discussion under “Risk Factors-Sources of and Fluctuations in Market Prices of Raw Materials” included under Item 1A of this Form 10-K.

Patents, Trademarks and Other Intellectual Property

We believe that the success of our business results not only from the technical competence, creativity and marketing abilities of our employees but also from the protection of our intellectual property through patents, trademarks and copyrights. As part of our ongoing research, development and manufacturing activities, we have a policy of seeking patents on new products, processes and improvements when appropriate.

Although, in the aggregate, the intellectual property discussed herein is of considerable importance to the manufacturing and marketing of many of our security, access control and user interface controls products, we do not consider any single patent or trademark or group of related patents or trademarks to be material to our business as a whole, except for the STRATTEC and STRATTEC with logo trademarks.

We also rely upon trade secret protection for our confidential and proprietary information. We maintain confidentiality agreements with our customers and key executives. In addition, we enter into confidentiality agreements with selected suppliers, consultants and employees as appropriate to evaluate new products or business relationships pertinent to our success. However, there can be no assurance that others will not independently obtain similar information and techniques or otherwise gain access to our trade secrets or that we can effectively protect our trade secrets.

Dependence Upon Significant Customers

A significant portion of our annual sales are to General Motors Company, Ford Motor Company, and Stellantis. These three customers accounted for approximately 66 percent of our net sales in both 2024 and in 2023. Further information regarding sales to our largest customers is set forth under the caption “Risk Factors – Loss of Significant Customers, Vehicle Content, Vehicle Models and Market Share” and “Risk Factors – Production Slowdowns by Customers” included under Item 1A of this Form 10-K and “Notes to Financial Statements-Sales and Receivable Concentration” included in Notes to Financial Statements under Item 8 in this Form 10-K.

The products sold to these customers are model specific, fitting only certain defined applications. Consequently, we are highly dependent on our major customers for their business, and on these customers' ability to produce and sell vehicles which utilize our products. We have enjoyed good relationships with General Motors Company, Ford Motor Company, Stellantis and other customers in the past, and expect to continue to do so in the future. However, a significant change in the purchasing practices of, or a significant loss of volume from, one or more of these customers could have a detrimental effect on our financial performance. We cannot provide any assurance that any lost sales volume could be replaced despite our historical relationships with our customers.

Sales and Marketing; Backlog

We provide our customers with engineered security, access control and user interface controls products including locksets, fobs, push button passive entry passive start and phone as a key ignition systems, steering column lock housings, electromechanical latches, power sliding door systems, power tailgate systems, power liftgate systems, power decklids, painted and non-painted door handles, door handle components and trim, steering wheel switches and controllers, E-shifters, paddle switches and other products which are unique to specific vehicles. Any given vehicle typically takes 1 to 3 years of development and engineering design time prior to being offered to the public. Our products are designed concurrently with the vehicle. Therefore, commitment to STRATTEC as the production source for such products and components occurs 1 to 3 years prior to the start of production for such components. We employ a commercial and engineering staff that assists in providing design and technical solutions to our customers. We believe that our customer focus and engineering expertise are competitive advantages that contribute to our strong market position in our industry. For example, we regularly provide innovative design proposals for our product offerings to our customers that we believe will improve customer access, vehicle security system quality, theft deterrence and system cost.

The typical process used by automotive manufacturers in selecting a supplier for our products is to offer the business opportunity to us and several of our competitors. Each competitor will pursue the opportunity, doing its best to provide the customer with the most attractive proposal. Price pressure is strong during this process but once an agreement is reached, a commitment is made for each year of the product program. Typically, price reductions resulting from productivity improvement by STRATTEC over the life of the product program are included in the contract and are estimated in evaluating each of these opportunities. A blanket purchase order, a contract indicating a specified part will be supplied at a specified price during a defined time period, is issued by customers for each model year. Production quantity releases or quantity commitments are made to that purchase order for weekly deliveries to the customer. As a consequence and because we are a "Just-in-Time" supplier to the automotive industry, we do not maintain a backlog of orders in the classic sense for future production and shipment and, accordingly, we are unable to provide a meaningful backlog comparison from year to year.

Competition

We compete with domestic and foreign-based competitors on the basis of custom product design, engineering support, quality, delivery and price. While the number of direct competitors in our product markets is currently relatively small, the automotive manufacturers actively encourage competition between potential suppliers. We have a large share of the North American market for our security, access control and user interface controls products because of our ability to provide optimal value, which is a beneficial combination of price, quality, technical support, program management, innovation and aftermarket support. In order to optimize our production costs while still offering a wide range of technical support, we utilize assembly operations and certain light manufacturing operations in Mexico, which results in lower labor costs as compared to the United States.

As locks and keys become more sophisticated and involve additional electronics, competitors with specific electronic expertise may emerge to challenge us. To address this, we have in recent years strengthened our electrical engineering knowledge and service. We are also working with several electronics suppliers to jointly develop and supply these advanced products.

Our lockset, user interface controls, wireless, latches and power access competitors include Huf North America, Ushin, Valeo, Tokai-Rika, Marquardt, Alpha-Tech, Honda Lock, Shin Chang, Magna, Edscha, Stabilus, Aisin, Brose, Mitsuba, Ohi, Kiekert, Inteva, Novares and Gecom. For additional information related to competition, see the information set forth under “Risk Factors-Highly Competitive Automotive Supply Industry” included under Item 1A of this Form 10-K.

Research and Development

We engage in research and development activities pertinent to automotive security, access control and user interface controls. A major area of focus for research is the expanding role of vehicle security, access and user interface via electronic interlocks and modes of communicating authorization data between consumers and vehicles. Development activities include new products, applications and product performance improvements. In addition, specialized data collection equipment is developed to facilitate increased product development efficiency and continuous quality improvements. For fiscal years 2024 and 2023, we incurred approximately $14.8 million and $15.9 million, respectively, on research and development expenses. We believe that, historically, we have committed sufficient resources to research and development and we intend to continue to invest in the future as required to support additional product programs associated with both existing and new customers. Patents are pursued and will continue to be pursued as appropriate to protect our interests resulting from these activities.

Customer Tooling

We incur costs related to tooling used in component production and assembly. Some of these costs are reimbursed by customers who then own the tools involved. See the information set forth under “Organization and Summary of Significant Accounting Policies-Customer Tooling in Progress” included in Notes to Financial Statements under Item 8 in this Form 10-K.

Environmental Compliance

As is the case with other manufacturers, we are subject to federal, state, local and foreign laws and other legal requirements relating to the generation, storage, transport, treatment and disposal of materials as a result of our manufacturing and assembly operations. These laws include the Resource Conservation and Recovery Act (as amended), the Clean Air Act (as amended), the Clean Water Act of 1990 (as amended) and the Comprehensive Environmental Response, Compensation and Liability Act (as amended). We have an environmental management system that is ISO-14001 certified. We believe that our existing environmental management system is adequate and we have no current plans for substantial capital expenditures in the environmental area.

As discussed in “Commitments and Contingencies” under Notes to Financial Statement under Item 8 in this Form 10-K, a site at our Milwaukee facility is contaminated by a solvent spill from a former above-ground solvent storage tank located on the east side of the facility, which spill occurred in 1985. We continue to monitor this situation.

We do not currently anticipate any materially adverse impact on our financial statements or competitive position as a result of compliance with federal, state, local and foreign environmental laws or other legal requirements. However, risk of environmental liability and charges associated with maintaining compliance with environmental laws is inherent in the nature of our business and there is no assurance that material liabilities or charges could not arise.

Human Capital

At June 30, 2024, we had 3,365 associates worldwide, of which 457 were employed in the United States and 2,905 were employed outside of the United States. 170 or 5.1 percent were represented by a collective bargaining agreement at our Milwaukee, Wisconsin facility, all of whom are our production associates. Approximately 152 or 4.5 percent were represented by a collective bargaining agreement at our Leon, Mexico facility. In recent years, we have not experienced any significant work slowdowns, stoppages or other labor disruptions. The current contract with our Milwaukee unionized associates is effective through November 1, 2025. The current contract with our Leon unionized associates is effective through April 8, 2025.

We are guided by our “Values and Beliefs” mission statement that focuses on Empowerment, Communication, Citizenship, Enterprise, Change and Consensus. We remain committed to areas of work place safety, product quality and customer satisfaction. Successful execution of our mission is dependent on attracting, developing and retaining key associates and members of our management team, as well as providing competitive pay and benefits.

Social Responsibility

We are committed to conducting business and making decisions honestly, fairly and within the law, and are guided by our “Values and Beliefs” mission statement. We are dedicated to earning and keeping the trust and confidence of our shareholders, customers and associates as well as the communities where we do business.

Our “Code of Business Ethics” provides guidelines and a framework for conducting business in an ethical manner. These beliefs go beyond STRATTEC and are expected of our suppliers as detailed in our “Supplier Code of Conduct.” We have adopted policies that seek to eliminate human trafficking, slavery, child labor and similar unethical and illegal practices from our global supply chain. In addition, we annually compile and file a Form SD with the Securities and Exchange Commission regarding “Conflict Minerals Disclosure and Report” as directed by the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010. The purpose of this report is to help prevent products used to finance or benefit armed groups in the covered countries of this filing.

Our commitment to our environment is documented in our “Environmental Management System,” which provides for continuous improvement of our efforts toward preventing pollution, complying with relevant environmental legislation and regulations and complying with customer-based environmental regulations. In addition, we maintain our own IATF 16949:2016 and ISO 14001 annual certifications, which are globally recognized quality standards for the automotive industry. STRATTEC’s major initiatives in this area consist of energy improvement initiatives, primarily related to solar in Milwaukee, WI, Auburn Hills, MI, and Juarez, Mexico, and moves to more energy efficient production capital equipment in Milwaukee, WI to reduce carbon emissions.

Available Information

We maintain our corporate website at www.strattec.com and make available, free of charge, through this website our Code of Business Ethics, annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statements for annual shareholder meetings and amendments to those reports that we file with, or furnish to, the Securities and Exchange Commission (the "Commission") as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Commission. We are not including all the information contained on or made available through our website as a part of, or incorporating such information by reference into, this Annual Report on Form 10-K. However, this report includes (or incorporates by reference) all material information about STRATTEC that is included on our website which is otherwise required to be included in this report.

ITEM 1A. RISK FACTORS

We recognize we are subject to the following risk factors based on our operations and the nature of the automotive industry in which we operate:

BUSINESS RISKS

Loss of Significant Customers, Vehicle Content, Vehicle Models and Market Share – Sales to General Motors Company, Ford Motor Company and Stellantis represented approximately 66 percent of our annual net sales (based on fiscal 2024 results) and, accordingly, these customers account for a significant percentage of our outstanding accounts receivable. The contracts with these customers provide for supplying the customer’s requirements for a particular model. The contracts do not specify a specific quantity of parts. The contracts typically cover the life of a model, which averages approximately four to five years. Components for certain customer models may also be “market tested” annually. Therefore, the loss of any one of these customers, the loss of a contract for a specific vehicle model, a reduction in vehicle content, the early cancellation of a specific vehicle model, technological changes or a significant reduction in demand for certain key models could occur, and if so, could have a material adverse effect on our existing and future revenues, operating results, financial condition and cash flows.

Our major customers also have significant under-funded legacy liabilities related to pension and postretirement health care obligations. The loss in our major customers’ North American automotive market share to the New Domestic automotive manufacturers (primarily the Japanese and Korean automotive manufacturers) and/or a significant decline in the overall market demand for new vehicles may ultimately result in severe financial difficulty for these customers, including bankruptcy. If our major customers cannot fund their operations, we may incur significant write-offs of accounts receivable and inventory, incur impairment charges or require restructuring actions.

Production Slowdowns by Customers – Our major customers and many of their suppliers were significantly impacted by the Great Recession of 2008/2009, by the COVID-19 pandemic in 2020, by supply chain issues resulting from the conflict in the Ukraine, and by a semiconductor chip shortage in 2021 and 2022. Many of our major customers instituted production cuts during our fiscal 2009 and 2010 due to the Great Recession and shuttered plants. Similarly, during 2020, 2021 and 2022 in response to the effects of the COVID-19 pandemic, the Ukraine conflict and the semiconductor chip shortage, many of our major customers again instituted production cuts and shuttered plants. While production subsequently increased after the cuts made in 2009 and again in 2021 when plants reopened following the COVID-19 closures, the current Ukraine conflict and semiconductor chip shortage, any additional economic slowdowns, pandemics or part supply shortages could bring about new production cuts which could have a material adverse effect on our existing and future revenues, operating results, financial condition and cash flows.

Cross-border Trade Issues or Tariffs – Our business is impacted by international or cross-border trade, including the import and export of products and goods into and out of the United States and trade tensions among nations. The shipping of goods across national borders is often more expensive and complicated than domestic shipping. Customs and duty procedures and reviews, including duty-free thresholds in various key markets, the application of tariffs, and security related governmental processes at international borders, may increase costs, discourage cross-border purchases, delay transit and create shipping uncertainties. Further, uncertainties stemming from changes in U.S. trade policies in particular with European countries and China, tariffs and the reaction of other countries thereto, could have an adverse effect on our business and may adversely impact our results of operations, financial condition and cash flows or reduce profitability on certain of our products.

Highly Competitive Automotive Supply Industry – The automotive component supply industry is highly competitive. Some of our competitors are companies, or divisions or subsidiaries of companies, that are larger than STRATTEC and have greater financial, global and technology capabilities. Our products may not be able to compete successfully with the products of these other companies, which could result in loss of customers and, as a result, decreased sales and profitability. Some of our major customers have previously announced that they will be reducing their supply base. This could potentially result in the loss of these customers and consolidation within the supply base. The loss of any of our major customers could have a material adverse effect on our existing and future revenues, results of operations, financial condition and cash flows.

In addition, our competitive position in the North American automotive component supply industry could be adversely affected in the event that we are unsuccessful in making strategic investments, acquisitions or alliances or in establishing joint ventures that would enable us to expand globally. We principally compete for new business at the beginning of the development of new models and upon the redesign of existing models by our major customers. New model development generally begins two to five years prior to the marketing of such new models to the public. The failure to obtain new business on new models or to retain or increase business on redesigned existing models could adversely affect our business and financial results. In addition, as a result of relatively long lead times for many of our components, it may be difficult in the short-term for us to obtain new sales to replace any unexpected decline in the sale of existing products. Finally, we may incur significant product development expense in preparing to meet anticipated customer requirements which may not be recovered.

Cyclicality and Seasonality in the Automotive Market – The automotive market is cyclical and is dependent on consumer spending, on the availability of consumer credit and to a certain extent, on customer sales incentives. Economic factors adversely affecting consumer demand for automobiles and automotive production, such as rising fuel costs, could adversely impact our net sales and net income. We typically experience decreased sales and operating income during the first fiscal quarter of each year due to the impact of scheduled customer plant shut-downs in July and new model changeovers during that period.

OPERATIONAL RISKS

Shortage of Raw Materials or Components Supply – In the event of catastrophic acts of nature such as fires, tsunamis, hurricanes, earthquakes and global pandemics and wars, a rapid increase in production demands or other unforeseen economic events such has prolonged periods of inflation, either we or our customers or other suppliers may experience supply shortages of raw materials or components. This could be caused by a number of factors, including a lack of production line capacity or manpower, working capital constraints or adverse conditions in banking and capital markets. In order to manage and reduce the costs of purchased goods and services, we and others within our industry have been rationalizing and consolidating our supply base. As a result, there is greater dependence on fewer sources of supply for certain components and materials used in our products, which could increase the possibility of a supply shortage of any particular component. If any of our customers experience a material supply shortage, either directly or as a result of supply shortages at another supplier, that customer may halt or limit the purchase of our products. Similarly, if we or one of our own suppliers experience a supply shortage, we may become unable to produce the affected products if we cannot procure the components from another source. Such production interruptions could impede a ramp-up in vehicle production and could have a material adverse effect on our business, results of operations, financial condition and cash flows.

We consider the production capacities and financial condition of suppliers in our selection process, and expect that they will meet our delivery requirements. However, there can be no assurance that strong demand, capacity limitations, shortages of raw materials, labor disputes or other problems will not result in any shortages or delays in the supply of components to us.

Because of the COVID-19 pandemic and the Ukraine conflict, we have experienced supply chain disruptions in particular with semiconductor chip shortages that impact our OEM customers’ ability to finish assembly of new vehicles and which have adversely impacted orders for our products and, accordingly, our results of operations and cash flows. The continuation or renewal of these impacts could have a material adverse effect on our future revenues, financial results, financial condition and cash flows.

Sources of and Fluctuations in Market Prices of Raw Materials – Our primary raw materials are high-grade zinc, brass, nickel silver, aluminum, steel and plastic resins, which are typically sourced from a limited number of suppliers. We believe our sources of raw materials are reliable and adequate for our needs. However, the development of future sourcing issues related to using existing or alternative raw materials and the global availability of these materials as well as significant fluctuations in the market prices of these materials may have an adverse effect on our results of operations, financial condition and cash flows if the increased raw material costs cannot be recovered from our customers. During recent fiscal years, we experienced higher raw material costs on the items listed above including freight costs on both raw material and purchased components.

Given the significant financial impact on us relating to changes in the cost of our primary raw materials, commencing with fiscal 2008 and thereafter, we began quoting quarterly material price adjustments for changes in our zinc costs in our negotiations with our customers. Our success in obtaining these quarterly price adjustments in our customer contracts is dependent on separate negotiations

with each customer. It is not a standard practice for our customers to include such price adjustments in their contracts. We have been successful in obtaining quarterly price adjustments in some of our customer contracts. However, we have not been successful in obtaining the adjustments with all of our customers.

Foreign Operations – We operate wholly owned and majority owned manufacturing operations in Mexico. As these operations continue to expand, their success will depend, in part, on our ability to anticipate and effectively manage certain risks inherent in international operations, including: enforcing agreements and collecting receivables through certain foreign legal systems, payment cycles of foreign customers, compliance with foreign tax laws, general economic and political conditions in these countries and compliance with foreign laws and regulations.

Cyber Vulnerability – In the ordinary course of business, we collect and store sensitive data, including our proprietary business information and that of our customers, suppliers and business partners, as well as personally identifiable information of our customers and employees, in our internal data centers, cloud services and on our networks. The secure processing, maintenance and transmission of this information is critical to our operations and business strategy. Cybersecurity attacks are becoming more sophisticated and include, but are not limited to, malicious software attempts to gain unauthorized access to data, and other electronic security breaches that could lead to disruptions in critical systems, unauthorized release of confidential or otherwise protected information, corruption or destruction of data and other manipulation or improper use of systems or networks. Despite our security measures, our information technology and infrastructure, as well as that of our partners, customers and suppliers, may be vulnerable to malicious attacks, breaches or system failures due to employee error, malfeasance or other disruptions, including as a result of rollouts of new systems. Any such breach or operation failure would compromise our networks or that of our business partners, customers or suppliers, and the information stored could be accessed, publicly disclosed, lost or stolen, cause transaction processing errors, processing inefficiencies, delays or cancellation of customer orders, the loss of customers, impediments to the manufacturing or shipment of products, or other business disruptions. Although we have cybersecurity insurance in place, such access or other loss of information could result in legal claims or proceedings, regulatory fines or penalties, disruption in our operations, damage to our reputation, loss of confidence in our products and services, increased costs, or the loss of assets, any of which could have a negative impact on our business, results of operations, financial condition and cash flows. In addition, as security threats and cybersecurity and data privacy and protection laws and regulations continue to evolve and increase in terms of sophistication, we may be required to or choose to invest additional resources in the security of our systems. Any such increased level of investment could adversely affect our financial condition or results of operations. We have programs in place to address and mitigate cybersecurity risks. These programs include regular monitoring of outside threats, continuous update of software to mitigate risk, education of employees to the risks of external threats, and simplification of infrastructure to minimize servers. Although we believe the foregoing programs are reasonable actions to mitigate cybersecurity risks, the failure of these programs to adequately protect against these risks could have a negative impact on our business, results of operations, financial condition and cash flows.

Qualified Personnel – Our business success depends, to a significant degree, on attracting and retaining qualified personnel. Our ability to sustain and grow our business requires us to hire, retain, develop and motivate a highly skilled and diverse management team and workforce. These types of employees are in high demand and often have competing employment opportunities. The labor market for skilled employees is highly competitive and we may lose key employees or be forced to increase their compensation to retain these types of employees. Failure to ensure that we have the leadership capacity with the necessary skill set and experience could impede our ability to deliver our growth objectives and execute our strategic plan. Organizational and reporting changes resulting from any future leadership transition or corporate initiatives could result in increased turnover. Additionally, any unplanned turnover or inability to attract and retain key employees could have a negative effect on our results of operations, including by significantly increasing our recruitment, training and other related employee costs. Moreover, the loss of key personnel, or the failure to attract qualified personnel, could have a material adverse effect on our business, results of operations, financial condition and cash flows.

Disruptions Due to Work Stoppages and Other Labor Matters – Our major customers and many of their suppliers have unionized work forces. Work stoppages or slow-downs experienced by our customers or their suppliers could result in slow-downs or closures of assembly plants where our products are included in assembled vehicles. For example, strikes by a critical supplier called by the United Auto Workers led to extended shut-downs of most of General Motors’ North American assembly plants in February 2008 and September 2019. A material work stoppage experienced by one or more of our customers could have an adverse effect on our business and our financial results. In addition, all production associates at our Milwaukee facility are unionized. A sixteen-day strike by these associates in June 2001 resulted in increased costs as all salaried associates worked with additional outside resources to produce the components necessary to meet customer requirements. The current contract with our Milwaukee unionized associates is effective through November 1, 2025. We also have unionized associates at our Leon, Mexico facility. The current contract with our Leon unionized associates is effective through April 8, 2025. We may encounter further labor disruption and we may also encounter unionization efforts in our other plants or other types of labor conflicts, any of which could have an adverse effect on our business, financial results, financial condition and cash flows. Labor contracts between General Motors Company, Ford Motor Company and Stellantis and their unionized associates under the United Auto Workers union expire in April 2028. In addition, their respective labor

agreements with the Canadian auto workers union expire in September 2026. Labor disruptions encountered by our customers during the contract period could have an adverse effect on our business and our financial results.

Climate Change and Environmental, Social, and Governance (ESG) Matters - Natural disasters or extreme weather conditions resulting from global climate change could lead us, our customers or our suppliers to experience disruptions in operations or disruptions in the availability of key components, which could lead to a material adverse impact on our results of operations, financial condition and cash flows. Further, various stakeholders, including customers, suppliers, lenders, regulators and those in the workforce, are increasing their expectations of companies to do their part to combat global climate change and its impact, and to conduct their operations in an environmentally sustainable manner with appropriate oversight by senior leadership. A failure to respond to the expectations and initiatives of our stakeholders could result in damage to our reputation and relationships with various stakeholders. We could also experience adverse impacts to our financial condition due to volatility in the cost or availability of capital, difficultly obtaining new business or entering into new supplier relationships, a possible loss of market share on our current product portfolio, fines and penalties or difficulty attracting and retaining a skilled workforce.

In addition to the increased stakeholder focus on climate change, customer, investor, and employee expectations in ESG have been rapidly evolving and increasing. The enhanced stakeholder focus on ESG requires the continuous monitoring of various and evolving regulations and standards and their associated requirements. Our failure, or that of our supply base, to adequately meet stakeholder expectations may result in, among other things, the loss of business, diluted market valuation, an inability to attract customers or an inability to attract and retain top talent that could adversely affect our business, financial condition or results of operations.

FINANCIAL RISKS

Financial Distress of Automotive Supply Base – During the Great Recession, which impacted calendar years 2009 and 2010, deteriorating automotive industry conditions adversely affected STRATTEC and our supply base. Lower production levels at our major customers, volatility in certain raw material and energy costs and the global credit market crisis resulted in severe financial distress among many companies within the automotive supply base. During the above time frame, several automotive suppliers filed for bankruptcy protection or ceased operations. The potential continuation or renewal of financial distress within the supply base (whether from infectious disease, the Ukraine conflict, the ongoing supply chain and logistics disruptions or otherwise) and our suppliers’ inability to obtain credit from lending institutions could lead to commercial disputes and possible supply chain interruptions. In addition, the potential for future adverse industry conditions (including from infectious disease, the Ukraine conflict or otherwise) may require us to provide financial assistance or other measures to ensure uninterrupted production. The continuation or renewal of these industry conditions could have a material adverse effect on our existing and future revenues, financial results, financial condition and cash flows.

Cost Reduction – There is continuing pressure from our major customers to reduce the prices we charge for our products. This requires us to generate cost reductions, including reductions in the cost of components purchased from outside suppliers. If we are unable to generate sufficient production cost savings in the future to offset pre-programmed price reductions or additional price reduction demands, our gross margin and profitability will be adversely affected.

Currency Exchange Rate Fluctuations – Our sales are denominated in U.S. dollars. We have manufacturing operations in Mexico, and as a result, a portion of our manufacturing costs are incurred in Mexican pesos. Therefore, fluctuations in the U.S. dollar/Mexican peso exchange rate may have a material effect on our profitability, cash flows, financial position, and may significantly affect the comparability of our results between financial periods. Any depreciation in the value of the U.S. dollar in relation to the value of the Mexican peso will adversely affect the cost of our Mexican operations when translated into U.S. dollars. Similarly, any appreciation in the value of the U.S. dollar in relation to the value of the Mexican peso will decrease the cost of our Mexican operations when translated into U.S. dollars.

Inflationary Pressures – We continue to experience elevated inflation in the markets in which we operate, with higher commodity, labor, freight and other cost pressure. While many costs will moderate over time, the increases in wage levels are likely to have longer-term effects on our cost structure. Additionally, we may continue to experience price increases from our suppliers in connection with the inflationary pressures they face. The inability to offset inflationary price increases through price increases from our customers, modifications to our products, continuous improvement actions or otherwise may have a material adverse effect on our financial results and financial condition.

Interest Rates – Higher interest rates could have a dampening effect on overall economic activity, the financial condition of our customers and suppliers and the financial condition of end consumers who ultimately create demand for the products we supply, all of which could negatively affect demand for our products.

Program Volume and Pricing Fluctuations – We incur costs and make capital expenditures for new program awards based upon certain estimates of production volumes over the anticipated program life for certain vehicles. While we attempt to establish the price of our products for variances in production volumes, if the actual production of certain vehicle models is significantly less than planned, our net sales and net income may be adversely affected. We cannot predict our customers’ demands for the products we supply either in the aggregate or for particular reporting periods.

Investments in Customer Program Specific Assets – We make investments in machinery and equipment used exclusively to manufacture products for specific customer programs. This machinery and equipment is capitalized and depreciated over the expected useful life of each respective asset. Therefore, the loss of any one of our major customers, the loss of specific vehicle models or the early cancellation of a vehicle model could result in impairment in the value of these assets which may have a material adverse effect on our financial results and financial condition.

Credit Facilities – Historically, from time to time we have relied on our existing credit facilities to provide us with adequate working capital to operate our business and fund our capital expenditures, including our expansion initiatives. Escalation of any global inflationary pressures on our operating results may impact our ability to satisfy our lending covenants in the short term. Additionally, we cannot provide assurance that we will be able to refinance, extend the maturity of, or otherwise amend the terms of our existing credit facilities, or that any refinancing, extension, or amendment will be on terms favorable to us or even on commercially reasonable terms. If our lenders reduce or terminate our access to amounts under our credit facilities, we may not have sufficient capital to fund our working capital needs and/or we may need to secure additional capital or financing to fund our working capital requirements or to repay outstanding debt under our credit facilities. Moreover, new credit facilities resulting from any refinancing of our existing facilities could have a significantly higher rate of interest and greater borrowing costs than our existing facilities. We can make no assurance that we will be successful in ensuring our availability of amounts under our credit facilities or in connection with raising additional capital and that any amount, if raised, will be sufficient to meet our cash flow requirements. If we are not able to maintain our borrowing availability under our credit facilities and/or raise additional capital when needed, we may be forced to sharply curtail our efforts to manufacture and promote the sale of our products or to curtail our operations.

There can be no assurance that the financial terms or covenants of any new credit facility will be the same or as favorable as those under our existing facilities. Additionally, our ability to complete a refinancing of our existing credit facilities prior to their respective maturities is subject to a number of conditions beyond our control. For example, if a disruption in the financial markets were to occur at the time that we intended to refinance our credit facilities, we might be restricted in our ability to access the credit lines. The restrictive covenants in any such new credit facility may limit our ability to engage in acts that may be in our best long term interests. A breach of any of these types of restrictive covenants in our credit facilities could result in a default under these facilities. If a default occurs, the lenders under our credit facilities may elect to declare all outstanding borrowings, together with accrued interest, to be immediately due and payable, to terminate any commitments they have to provide further borrowings and to exercise any other rights they have under the facilities or applicable law.

Warranty Claims – We are exposed to warranty claims in the event that our products fail to perform as expected, and we may be required to participate in the repair costs incurred by our customers for such products. We are engaged in ongoing discussions with our customers regarding warranty information and potential claims. The results of these discussions could result in additional warranty charges/claims in future periods. Depending on the nature of and the volume of vehicles involved in the potential warranty claims, these charges could be material to our financial statements. Prior to fiscal 2010, we had experienced relatively low warranty charges from our customers due to our commercial arrangements and improvements in the quality, reliability and durability of our products. Due to our largest customers’ extension and/or expansion of their warranty protection programs and demands for higher warranty cost sharing arrangements from their suppliers in their terms and conditions of purchase, including from STRATTEC, we increased our provision to cover warranty exposures since fiscal year 2010. In 2015, 2018, and 2023, our increased warranty provision was the result of various known or expected customer warranty issues outstanding and estimated future warranty costs to be incurred as of June 2015, June 2018, and June 2023, respectively, for which amounts were reasonably estimable. As additional information becomes available, actual results may differ from recorded estimates or we may need to record additional warranty provisions. Although we have product recall insurance in place, if our customers demand higher warranty-related cost recoveries, or if our products fail to perform as expected, it could have a material adverse impact on our results of operations, financial condition and cash flows.

LEGAL AND REGULATORY RISKS

Environmental, Safety and Other Regulations – We are subject to federal, state, local and foreign laws and other legal requirements related to the generation, storage, transport, treatment and disposal of materials as a result of our manufacturing and assembly operations. These laws include, among others, the Resource Conservation and Recovery Act (as amended), the Clean Air Act (as amended) and the Comprehensive Environmental Response, Compensation and Liability Act (as amended). We have an environmental management system that is ISO-14001 certified. We believe that our existing environmental management system is adequate for current and anticipated operations and we have no current plans for substantial capital expenditures in the environmental

area. An environmental reserve was established in 1995 for estimated costs to remediate a site at our Milwaukee facility. The site was contaminated from a former above-ground solvent storage tank, located on the east side of the facility. The contamination occurred in 1985 and is being monitored in accordance with federal, state and local requirements. We do not currently anticipate any material adverse impact on our results of operations, financial condition or competitive position as a result of compliance with federal, state, local and foreign environmental laws or other related legal requirements. However, risk of environmental liability and changes associated with maintaining compliance with environmental laws is inherent in the nature of our business and there is no assurance that material liabilities or changes could not arise.

Compliance Related to Conflict Minerals Regulations – We are required to disclose the use of tin, tantalum, tungsten and gold (collectively, “conflict minerals”) mined from the Democratic Republic of the Congo and adjoining countries (the “covered countries”) if a conflict mineral(s) is necessary to the functionality of a product manufactured, or contracted to be manufactured, by us. We may determine, as part of our compliance efforts, that certain products or components we obtain from our suppliers could contain conflict minerals. If we are unable to conclude that all our products are free from conflict minerals originating from covered countries, this could have a negative impact on both our existing and future business, reputation and/or results of operations. We may also encounter challenges to satisfy customers who require that our products be certified as conflict free, which could place us at a competitive disadvantage if we are unable to substantiate such a claim. Compliance with these rules could also affect the sourcing and availability of some of the minerals used in the manufacture of products or components we obtain from our suppliers, including our ability to obtain products or components in sufficient quantities and/or at competitive prices to sell to our customers.

Income Taxes – We are a U.S.-based multinational company subject to tax in multiple U.S. and foreign tax jurisdictions. Significant judgment is required in determining our global provision for income taxes, deferred tax assets or liabilities and in evaluating our tax positions on a worldwide basis. While we believe our tax positions are consistent with the tax laws in the jurisdictions in which we conduct our business, it is possible that these positions may be overturned by jurisdictional tax authorities, which may have a significant impact on our global provision for income taxes. Tax laws are dynamic and subject to change as new laws are passed and new interpretations of these laws are issued or applied. We are also subject to ongoing tax audits. These audits can involve complex issues, which may require an extended period of time to resolve and can be highly subjective. Tax authorities may disagree with certain tax reporting positions taken by us and, as a result, assess additional taxes against us. We regularly assess the likely outcomes of these audits in order to determine the appropriateness of our tax provision.

RISK RELATED TO INFECTIOUS DISEASE OUTBREAKS, SUCH AS COVID-19

Pandemics or disease outbreaks, such as COVID-19, have disrupted, and may continue to disrupt, the global economy. For example, the Coronavirus (COVID-19) pandemic adversely affected our operations and supply chains, in particular related to the sourcing of semiconductor chips, which caused us to experience reductions in demand for certain of our products and services as a result of the pandemic and this supply chain disruption. Because we and our suppliers manufacture products in facilities around the world, we have been and may continue to be vulnerable to an outbreak of COVID-19 (or the resurgence of such an outbreak) or other contagious diseases in those regions as well as in the United States. The effects of COVID-19 and other contagious diseases have included and may continue to include disruptions or restrictions on our ability to travel, our ability to manufacture our affected products and our ability to ship these affected products to customers as well as disruptions that have and may continue to affect our key customers and suppliers, including those in these regions or other affected regions of the world, including in the United States, Mexico, China and neighboring countries. Current and future disruption of our ability to manufacture or distribute our products or of the ability of our customers to take orders of our products or our suppliers to deliver key raw materials on a timely basis could have a material adverse effect on our sales levels, pricing for raw materials and components and our operating results. In addition, the worsening of COVID-19 and future outbreaks of contagious diseases in the human population could result in a widespread health crisis that adversely affects the economies and financial markets of many countries (including those where we operate or where our products are ultimately used), resulting in an economic downturn that could affect demand for our products and impact our operating results.

RISK RELATED TO GEOPOLITICAL INSTABILITY

We are currently operating in a period of geopolitical instability resulting from the ongoing military conflict between Russia and the Ukraine, which has significantly contributed to economic uncertainty, capital market disruption and supply chain interruptions in the U.S. and global markets. On February 24, 2022, a full-scale military invasion of the Ukraine by Russian troops began. While the length and impact of the ongoing conflict is unpredictable, the Ukraine conflict could lead to market disruptions, including supply chain interruptions and significant volatility in commodity prices, and in credit and capital markets. The conflict in the Ukraine has led to sanctions and other penalties being levied against Russia by the U.S., the EU, and other countries. Additional potential sanctions and penalties have also been proposed. Russian military actions and the resulting sanctions, as well as future geopolitical conflicts, could adversely affect the global economy and financial markets and lead to instability and lack of liquidity in capital markets, potentially further disrupting the supply chain for necessary components and raw materials used by us or our customers in producing

product. Any of the foregoing factors could have a material adverse effect on our business, operating results, financial condition and cash flows.

GENERAL RISK FACTOR

In addition to the specific risks above, we, our customers, and our suppliers may be adversely affected by changing economic conditions throughout the world. These conditions may result in reduced consumer and investor confidence, instability in the credit and financial markets, volatile corporate profits, and reduced business and consumer spending. We, our customers, and our suppliers and the economy as a whole also may be affected by future world or local events outside of our control, such as tariffs and other trade protection measures put in place by the United States or other countries, acts of terrorism, developments in the war on terrorism, civil unrest, conflicts in international situations, weather events, natural disasters, outbreaks of infectious diseases, such as the COVID-19 pandemic, and government or political related developments or issues, including changes in tax laws and regulations. These factors could have a material adverse impact on our results of operations, financial condition, and cash flows. Additionally, political and social turmoil, international conflicts (such as the Ukraine conflict) and terrorist acts may put pressure on global economic conditions that may adversely impact our operating results. Unstable political, social or economic conditions may make it difficult for us, our customers and our suppliers to accurately forecast and plan future business activities. If such conditions arise or persist, they could have a material adverse impact on our results of operations, financial condition and cash flows.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

ITEM 1C. CYBERSECURITY

We take cybersecurity threats seriously, including regular assessment of cybersecurity risks both internally and with third party assistance and updates to the Board of Directors at least annually. We use the National Institute of Standards and Technology Cybersecurity Framework (NIST CSF) as the basis for the information security management system. As we implement new technologies, the NIST CSF is used as the guiding framework. Among other best practices, we use multi-factor authentication wherever possible for external access to systems, assess and update current versions of security solutions, perform regular cybersecurity training and email phishing campaigns for employees, use third parties to perform external penetration testing, and maintain disaster recovery and incident response plans, which include retainer contracts for third party cybersecurity response specialists. We employ a combination of methods to monitor for new or developing cybersecurity risks.

The Board regularly receives reports and training from management and third parties on cybersecurity matters. Management is responsible for developing cybersecurity programs, as may be required by applicable law or regulation. Our cybersecurity personnel have the appropriate expertise in IT and cybersecurity, which generally has been gained from a combination of education, including relevant degrees and/or certifications, and prior work experience. Our cybersecurity personnel, along with third parties, monitor the prevention, detection, mitigation, and remediation of cybersecurity incidents as part of the cybersecurity programs described above. Incidents, if any, are escalated to management and the Board according to our incident response policy. There have been no material cybersecurity incidents in the periods presented.

ITEM 2. PROPERTIES

We have five manufacturing plants, one warehouse, and one sales office. These facilities are described as follows:

** Leased unit within a complex.

ITEM 3. LEGAL PROCEEDINGS

In the normal course of business we may be involved in various legal proceedings from time to time. We do not believe we are currently involved in any claim, action or proceeding the ultimate disposition of which would have a material adverse effect on our financial statements.

ITEM 4. MINE SAFETY DISCLOSURES

None.

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our common stock is traded on the NASDAQ Global Market under the symbol “STRT.”

Registered shareholders of record at June 30, 2024, were 800.

The Company’s Board of Directors authorized a stock repurchase program on October 16, 1996, and the program was publicly announced on October 17, 1996. Since inception of the stock repurchase program, the Board of Directors has periodically increased the number of shares authorized for repurchase under the program. At June 30, 2024, the number of shares of the Company’s common stock authorized for repurchase under the program totaled 3,839,395. The program currently authorizes the repurchase of the Company’s common stock from time to time, directly or through brokers or agents, and has no expiration date. Over the life of the repurchase program through June 30, 2024, a total of 3,655,322 shares have been repurchased at a cost of approximately $136.4 million. No shares were repurchased during the fiscal year ended June 30, 2024.

ITEM 6. [RESERVED]

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following Discussion and Analysis should be read in conjunction with STRATTEC SECURITY CORPORATION’s accompanying Financial Statements and Notes thereto included in this Form 10-K. Unless otherwise indicated, all references to years or quarters refer to fiscal years or fiscal quarters of STRATTEC.

Executive Overview

Historically, traditional domestic automotive OEMs (General Motors, Ford and Stellantis) have comprised a majority of our total net sales. During the past two decades, these customers have lost North American market share to New Domestic automotive manufacturers (primarily Japanese and Korean automotive manufacturers). In addition, our financial performance depends in large part on conditions in the North American automotive industry, which in turn, are largely dependent upon the U.S. economy. During fiscal years 2024 and 2023, the traditional domestic automotive OEMs represented 66 percent of our total net sales.

Fiscal 2024 net sales were $537.8 million compared to $492.9 million in fiscal 2023. $32.7 million of the $44.9 million net sales increase was driven by net price increases to our major OEM customers. When excluding this pricing effect, underlying sales increased by $12.2 million, up 2.5% over the prior year, largely reflecting the launch of new customer programs in the latter half of the fiscal year. The $32.7 million of aforementioned net price increase was composed of $9.7 million one-time retroactive pricing that is not expected to recur, and $23.0 million in ongoing increases in current part prices to our customers. In addition, we settled negotiations with certain key suppliers and paid $5.7 million in higher prices during the year, of which $1.7 million relates to one-time retroactive pricing with the remaining $4.0 million attributable to higher supplier prices on an ongoing basis. The net margin result of both customer and supplier changes in price represented a $27.0 million net margin improvement in fiscal 2024, comprised of $8.0 million of nonrecurring one-time pricing and $19.0 million of ongoing pricing. These net margin improvements surpassed the higher end of our target ranges of $6.0 million and $15.0 million for one-time and ongoing net pricing respectively, which were provided in the fiscal 2024 Outlook in our 2023 Form 10-K.

During fiscal 2024, our cost of sales performance proved challenging. Despite favorability in our raw materials costs, which recovered from elevated levels in fiscal 2023, and improved efficiency of our Mexican operations through a salaried staff reduction in the first quarter and production efficiencies implemented throughout the year, our overall cost of sales performance deteriorated. Factors driving higher costs in our manufacturing operations were primarily:

Sales, engineering and administrative expenses decreased in fiscal 2024, primarily due to historically high engineering cost reimbursements from our customers, offset by expenses related to the company bonus plan and the transition of our Chief Executive Officer position. Our improved operating performance enabled us to achieve net income attributable to STRATTEC of $16.3 million in fiscal 2024 compared with a net loss attributable to STRATTEC of $6.7 million in fiscal 2023.

Based on July 2024 projections from our third-party forecasting service, S&P Global, North American light vehicle production is forecasted to grow modestly between 2024 and 2028. Model year 2024 preliminary North American vehicle build was 15.8 million. S&P Global currently expects 2025 model year vehicle build to remain at 15.8 million vehicles, growing to 16.2 million vehicles in 2026 and then to 16.4 million vehicles for 2027 and 2028. The North American vehicle build forecasts for our primary customers (Ford, General Motors and Stellantis) project a modest decline from 6.7 million vehicles in 2024 to 6.5 million vehicles in 2025 and then an increase to 6.9 million vehicles in model year 2026, stabilizing at that level for model years 2027 and 2028. In an effort to increase our sales, we will continue pursuing opportunities to expand our offerings with existing and new customers. These forecasts are subject to variability based upon a number of factors, including the overall North American economy, current employment levels, availability and cost of consumer credit, home equity values, fuel prices, changes in customer vehicle and option preferences, product quality issues, including those related to recall and product warranty coverage issues, and other key factors that we believe could determine whether consumers can or will purchase new vehicles or particular brands.

Results of Operations

2024 Compared to 2023

Net Sales to each of our customers or customer groups in the current year and prior year were as follows (millions of dollars):

The year-over-year sales increase of $44.9 million reflects net price increases from our major OEM customers of $32.7 million of which $23.0 million is attributable to ongoing increases in current part prices and $9.7 million relates to one-time retroactive price increases for parts shipped in the prior year for which the net price increase was agreed to during the current year. In addition to the net price increases, the following items specifically impacted sales to the noted customer groups between years:

Cost of goods sold in the current year and prior year were as follows (millions of dollars):

Prior year reclassifications have been made for consistency with current year presentation.

Total cost of goods sold increased $21.5 million between years. The year-over-year increase in direct material costs of $6.1 million was the result of increases in sales volumes and content we supply, as discussed above, and $5.7 million of negotiated material price increases paid to key suppliers. Price increases paid to suppliers attributed to ongoing operations totaled $4.0 million while the remaining $1.7 million related to one-time retroactive price increases. The impact of content and material price increases was partially offset by reduced zinc costs of approximately $3.1 million in the current year as compared to the prior year. The year-over-year increase in labor and overhead costs of $15.4 million was impacted by the following:

Cost Increases:

Cost Decreases:

The net unfavorable impact of specific labor and overhead costs noted above was partially offset by more favorable absorption of our fixed overhead costs in the current year as compared to the prior year due to higher production volumes driven by an increase in finished goods inventory during the year and increased sales volumes.

Gross profit margin improvement between years was driven by pricing relief achieved during the current year as discussed above. The impact of one-time retroactive pricing in the current year increased the gross profit margin percentage by 1.3 percentage points. Additionally, favorable impacts of ongoing customer price increases, reduced zinc costs, favorable absorption, production efficiencies in Mexico and reduced royalty costs were partially offset by an unfavorable U.S. dollar to Mexican peso exchange rate, wage increases in Mexico, and increased freight, bonus, and severance costs, all as discussed above.

Engineering, Selling and Administrative Expenses in the current year and prior year were as follows:

Engineering, selling and administrative expenses were impacted by the following:

Cost Decrease:

Cost Increase:

Income from operations in the current year was $17.8 million compared to loss from operations of $6.1 million in the prior year. This change between years was the result of an increase in sales in the current year as compared to the prior year along with a reduction in engineering, selling and administrative expenses partially offset by an increase in cost of goods sold, all as discussed above.

Effective June 30, 2023, STRATTEC sold its one-third interest in VAST LLC to WITTE. Refer to the discussion of the Equity Restructuring Agreement within Joint Ventures and Majority Owned Subsidiaries included in the Notes to Financial Statements within this Form 10-K for additional information regarding the sale. The equity loss of joint ventures was $331,000 in the current year compared to equity earnings of joint ventures of $1.6 million in the prior year. The current year loss was the result of additional professional fees incurred related to the sale of STRATTEC's investment in VAST LLC. The $331,000 loss is an adjustment to the gain on sale of VAST LLC, which was recorded in the prior year. Our adjusted loss to date on the sale of VAST LLC totals $221,000. Prior year equity earnings includes STRATTEC's one-third of a loss on disposal of VAST LLC's investment in Brazil of $531,000 and a gain on sale of STRATTEC's one-third share of VAST LLC of $110,000.

Included in other income (expense), net in the current year and prior year were the following items (thousands of dollars):

Our effective income tax rate for 2024 was 18.7 percent compared to (16.7) percent in 2023. Our 2024 effective tax rate was reduced by $1.2 million due to changes in the estimate of our 2023 foreign tax credits associated with the sale of our interest in VAST LLC. Our 2023 effective tax rate was impacted by $2.2 million in China non-resident capital gain tax resulting from the sale of our interest in VAST LLC, a valuation allowance of $1.4 million related to our assessment of the future realization of capital loss carryforwards generated from the sale of our interest in VAST LLC, a net Global Intangible Low Tax Income (GILTI) cost of $613,000 and the impact of available R&D and foreign tax credits on pre-tax book losses. Our income tax provision for each year 2024 and 2023 was affected by the non-controlling interest portion of our pre-tax income and R&D tax credit. The non-controlling interest impacts the effective tax rate as our ADAC-STRATTEC LLC entity was taxed as a partnership for U.S. tax purposes in 2024 and our ADAC-STRATTEC LLC and STRATTEC POWER ACCESS LLC entities were taxed as partnerships for U.S. tax purposes in 2023.

Liquidity and Capital Resources

Working Capital (millions of dollars)

Outstanding Receivable Balances from Major Customers

Our primary source of cash flow is from our major customers, which include Stellantis, General Motors Company and Ford Motor Company. As of the date of filing this Annual Report with the Securities and Exchange Commission, all of our customers are making payments on their outstanding accounts receivable in accordance with the payment terms included on their purchase orders. A summary of our outstanding receivable balances from our major customers as of June 30, 2024 and July 2, 2023 was as follows (millions of dollars):

Cash Balances in Mexico

We earn a portion of our operating income in Mexico. As of June 30, 2024, $1.4 million of our $25.4 million cash and cash equivalents balance was held in Mexico. These funds are available for repatriation as deemed necessary.

Cash Flow Analysis

Cash flow from operating activities increased $2.2 million between years as the impact of increased profitability between years, as previously discussed, was offset by a net increase in working capital. The net increase in our working capital included the following working capital changes (millions of dollars):

- Accrued salaries and benefits increased $6.3 million due to the accrual of $4.5 million under our incentive bonus plan as well as increased benefit accruals for our Mexican associates, which resulted from annual wage increases, including January 1, 2024 government mandated increases. There was no bonus accrual as of June 2023.

- VAT payable balances increased $3.5 million due to periods from 2024 being open to audit. Refer to the discussion of VAT recoverable balances and the VAT certification issue above.

- Income tax payable balances increased $2.5 million in 2024 based on the required income tax provision, the timing and amounts of federal, state and foreign tax payments made, and the timing of utilization of tax credits.

The prior year increase was due to the following:

- Accounts payable increased $14.0 million primarily due to a change in inventory management, shipping terms, and payment terms with a significant vendor and the temporary suspension of ADAC-STRATTEC LLC's payment of engineering, research and design fees and sales fees to ADAC in order to comply with ADAC-STRATTEC debt covenants.

- Accrued salaries and benefits increased $4.7 million due to increased salaries and benefits for our Mexican associates.

- Income taxes payable increased $2.4 million primarily due to the accrual of a China non-resident capital gain tax as a result of the sale of our interest in VAST LLC.

- Value added tax payable balances increased $3.0 million due to several periods being open to audit in Mexico.

Net cash used in investing activities of $7.8 million during 2024 included capital expenditures of $9.8 million in support of requirements for new product programs and the upgrade and replacement of existing equipment partially offset by additional proceeds from the sale of our interest in VAST LLC of $2.0. Net cash provided by investing activities of $8.9 million during 2023 included proceeds from the sale of our interest in VAST LLC of $26.2 million and a net increase in cash of $354,000 resulting from STRATTEC's purchase of the net assets of VAST Korea. The cash inflows were partially offset by capital expenditures of $17.4 million in support of requirements for new product programs and the upgrade and replacement of existing equipment and a $278,000 investment in VAST LLC for the purpose of funding general operating expenses for Sistema de Acesso Veicular Ltda, VAST LLC's Brazilian joint venture.

Net cash provided by financing activities of $72,000 during 2024 included additional borrowings under our credit facilities of $2.0 million and $72,000 received for purchases under our employee stock purchase plan. These cash inflows were partially offset by the repayment of borrowings under credit facilities of $2.0 million. Net cash used in financing activities of $7.4 million during 2023 included a payment of $9.0 million related to STRATTEC's purchase of the remaining non-controlling interest of STRATTEC POWER ACCESS LLC from WITTE Automotive, the repayment of borrowings under credit facilities of $15.0 million, and $600,000 of dividend payments to non-controlling interests in our subsidiaries. These cash outflows were partially offset by additional borrowings under our credit facilities of $17.0 million and $183,000 received for the exercise of stock options under our stock incentive plan and purchases under our employee stock purchase plan.

Cash Requirements

Dividends

On May 13, 2020, our Board of Directors took action to temporarily suspend payment of our quarterly dividend for the foreseeable future in order to conserve cash as a result of the economic downturn that began with COVID-19. No dividends were paid to shareholders during fiscal 2024 or fiscal 2023.

Future Capital Expenditures

We anticipate capital expenditures will be approximately $15.0 million in fiscal 2025 in support of requirements for new product programs and the upgrade and replacement of existing equipment.

Stock Repurchase Program

Our Board of Directors has authorized a stock repurchase program to buy back outstanding shares of our common stock. Shares authorized for buy back under the program totaled 3,839,395 at June 30, 2024. A total of 3,655,322 shares have been repurchased over the life of the program through June 30, 2024, at a cost of approximately $136.4 million. No shares were repurchased during fiscal 2024 or 2023. Additional repurchases may occur from time to time and are expected to continue to be funded by cash flow from operations and current cash balances.

Other Cash Requirements

In connection with the June 30, 2023 sale of our interest in VAST LLC to WITTE Automotive, we will be required to pay nonresident capital gain tax in China. The payment, which is expected to be made during our fiscal 2025, is expected to total approximately $1.9 million.

We anticipate payments of approximately $4.5 million to associates in connection with our incentive bonus plan during the first quarter of our fiscal 2025 related to bonuses earned in our fiscal 2024.

We also have an operating lease for our El Paso, Texas finished goods and service parts distribution warehouse, which has a term in excess of one year. We also have purchase commitments related to zinc and other purchased parts. Refer to required future payments under the lease and purchase commitments in the discussion of Leases under Organization and Summary of Significant Accounting Policies and in the discussion of Commitments and Contingencies included in the Notes to Financial Statements included as part of Item 8 within this Form 10-K.

Credit Facilities

STRATTEC has a $40 million secured revolving credit facility (the “STRATTEC Credit Facility”) with BMO Harris Bank N.A. ADAC-STRATTEC LLC has a $20 million secured revolving credit facility (the “ADAC-STRATTEC Credit Facility”) with BMO Harris Bank N.A., which is guaranteed by STRATTEC. The ADAC-STRATTEC Credit Facility borrowing limit decreases to $18 million on August 1, 2025. The credit facilities both expire August 1, 2026. Borrowings under either credit facility are secured by our U.S. cash balances, accounts receivable, inventory, and fixed assets located in the U.S. Interest on borrowings under the STRATTEC Credit Facility were at varying rates based, at our option, on LIBOR plus 1.25 percent or the bank’s prime rate through February 22, 2023, SOFR plus 1.35 percent for the period February 23, 2023 through September 5, 2023, and SOFR plus 1.85 percent subsequent to September 5, 2023. Interest on borrowings under the ADAC-STRATTEC Credit Facility were at varying rates based, at our option, on the bank's prime rate with no interest rate margin through May 30, 2024 and a 2 percent interest rate margin subsequent to May 30, 2024 or LIBOR plus 1.25 percent through February 6, 2023, SOFR plus 1.35 percent for the period February 7, 2023 through May 30, 2024, and SOFR plus 3.10 percent subsequent to May 30, 2024. Both credit facilities contain a restrictive financial covenant that requires the applicable borrower to maintain a minimum net worth level. The ADAC-STRATTEC Credit Facility includes an additional restrictive financial covenant that requires the maintenance of a minimum fixed charge coverage ratio. As of June 30, 2024, we were in compliance with all financial covenants required by these credit facilities. There were no outstanding borrowings under the STRATTEC Credit Facility as of June 30, 2024 or July 2, 2023. The average outstanding borrowings and weighted average interest rate on the STRATTEC Credit Facility loans were approximately $33,000 and 8.5 percent, respectively, during 2024. The average outstanding borrowings and weighted average interest rate on the STRATTEC Credit Facility loans were approximately $15.4 million and 5.7 percent, respectively, during 2023. Outstanding borrowings under the ADAC-STRATTEC Credit Facility totaled $13 million at both June 30, 2024 and July 2, 2023. The average outstanding borrowings and weighted average interest rate on the ADAC-STRATTEC Credit Facility loans were approximately $13.0 million and 6.8 percent, respectively, during 2024. The average outstanding borrowings and weighted average interest rate on the ADAC-STRATTEC Credit Facility loans were approximately $12.4 million and 5.3 percent, respectively, during 2023. We believe that the credit facilities are adequate, along with existing cash flows from operations, to meet our anticipated capital expenditure, working capital, dividend, and operating expenditure requirements.

Joint Ventures and Majority Owned Subsidiaries

Refer to the discussion of Investment in Joint Ventures and Majority Owned Subsidiaries and discussion of Equity (Loss) Earnings of Joint Ventures included in the Notes to Financial Statements included within this Form 10-K.

Critical Accounting Policies

We believe the following represents our critical accounting policies:

Liability for Uncertain Tax Positions – We are subject to income taxation in many jurisdictions around the world. Significant management judgment is required in the accounting for income tax contingencies because the outcomes are often difficult to determine. We are required to measure and recognize uncertain tax positions that we have taken or expect to take in our income tax returns. The benefit of an uncertain tax position can only be recognized in the financial statements if management concludes that it is more likely than not that the position will be sustained with the tax authorities. For a position that is likely to be sustained, the benefit recognized in the financial statements is measured at the largest amount that is greater than 50 percent likely of being realized. A reserve is established for the difference between a position taken in an income tax return and the amount recognized in the financial statements. The amount of unrecognized benefits, that if recognized, would affect the effective tax rate was $1.2 million at June 30, 2024 and $1.1 million at July 2, 2023. An increase or decrease in our assessment of the recorded amount of unrecognized benefits by

10 percent would result in an increase or decrease in the reported tax provision, before the impact of interest and penalties, of $120,000 at June 30, 2024 and $110,000 at July 2, 2023. Refer to the discussion of Income Taxes included in the Notes to Financial Statements included as part of Item 8 within this Form 10-K.

Warranty Reserve – We have a warranty reserve recorded related to our exposure to warranty claims in the event our products fail to perform as expected, and we may be required to participate in the repair costs incurred by our customers for such products. The recorded warranty reserve balance involves judgment and estimates. Our reserve estimate is based on an analysis of historical warranty data as well as current trends and information. Actual warranty costs might differ from estimates due to the level of actual claims varying from our claims experience and estimates and final negotiations and settlements reached with our customers. Therefore, future actual claims experience could result in changes in our estimates of the required reserve. Sensitivity of potential warranty or product recall claims is dependent on the respective customer platform, volumes, production years and product content. We have product recall insurance once a recall claim exceeds $2.5 million with a limit of $30 million. Refer to the discussion of Warranty Reserve under Organization and Summary of Significant Accounting Policies included in the Notes to Financial Statements included as part of Item 8 within this Form 10-K.

We believe the reserve discussed above is estimated using consistent and appropriate methods. However, changes to the assumptions could materially affect the recorded reserve amount.

New Accounting Standards

Refer to the discussion of New Accounting Standards under Organization and Summary of Significant Accounting Policies included in the Notes to Financial Statements included as part of Item 8 within this Form 10-K.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not applicable.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the shareholders and the Board of Directors of STRATTEC SECURITY CORPORATION

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of STRATTEC SECURITY CORPORATION and subsidiaries (the "Company") as of June 30, 2024 and July 2, 2023, the related consolidated statements of income (loss) and comprehensive income (loss), shareholders’ equity, and cash flows, for the fiscal years ended June 30, 2024 and July 2, 2023, and the related notes (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of June 30, 2024 and July 2, 2023, and the results of its operations and its cash flows for the fiscal years ended June 30, 2024 and July 2, 2023, in conformity with accounting principles generally accepted in the United States of America.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of June 30, 2024, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated September 5, 2024, expressed an unqualified opinion on the Company's internal control over financial reporting.

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current-period audit of the financial statements that was communicated or required to be communicated to the audit committee and that (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Specific Warranty Reserve – Refer to the Warranty Reserve Footnote to the Financial Statements

Critical Audit Metter Description

The Company records a specific warranty reserve for known warranty claims when its products fail to perform as expected and when it is probable that they will participate in the repair costs incurred by its customers for such products.

The specific warranty reserve is estimated based on management’s analysis of historical warranty data, current trends and information, known and projected claims for products sold, and the terms of specific agreements. The specific warranty reserve requires management to apply significant judgment to develop its estimate. Actual warranty costs may differ from management’s estimated costs as a result of, but not limited to, negotiation with customers, changes to the assumptions of repair and/or replacement costs, and repair rate. Such matters may require future adjustments to the reserve which could be material.

We identified a certain specific warranty reserve as a critical audit matter because estimating future warranty costs requires significant judgment by management. Auditing management’s assumptions about management’s estimated future warranty costs involves a high degree of auditor judgment and an increased extent of effort to evaluate the reasonableness of management’s estimates.

How the Critical Audit Matter Was Addressed in the Audit

Our audit procedures related to the determination of the certain specific warranty reserve included the following, among others:

/s/ Deloitte & Touche LLP

Milwaukee, Wisconsin

September 5, 2024

We have served as the Company's auditor since 2023.

CONSOLIDATED STATEMENTS OF INCOME (LOSS) AND COMPREHENSIVE INCOME (LOSS)

(IN THOUSANDS, EXCEPT PER SHARE AMOUNTS)

The accompanying Notes to Financial Statements are an integral part of these Consolidated Statements of Income (Loss) and Comprehensive Income (Loss).

CONSOLIDATED BALANCE SHEETS

(IN THOUSANDS, EXCEPT SHARE AMOUNTS AND PER SHARE AMOUNTS)