UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549  

 

FORM 10-Q

 

For the quarterly period ended March 27, 2016

or

For the transition period from                      to                     

Commission File Number 0-25150

 

STRATTEC SECURITY CORPORATION

(Exact Name of Registrant as Specified in Its Charter)

 

 

3333 West Good Hope Road, Milwaukee, WI 53209

(Address of Principal Executive Offices)

(414) 247-3333

(Registrant’s Telephone Number, Including Area Code)

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.     YES  x    NO  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).     YES  x    NO  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     YES  ¨    NO  x

Indicate the number of shares outstanding of each of the issuer’s classes of common stock as of the latest practicable date.

Common stock, par value $0.01 per share: 3,565,116 shares outstanding as of March 28, 2016 (which number includes all restricted shares previously awarded that have not vested as of such date).

 

 

 

 

 

 

---

STRATTEC SECURITY CORPORATION

FORM 10-Q

March 27, 2016

INDEX

 

PROSPECTIVE INFORMATION

A number of the matters and subject areas discussed in this Form 10-Q contain “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. These statements may be identified by the use of forward-looking words or phrases such as “anticipate,” “believe,” “would,” “expect,” “intend,” “may,” “planned,” “potential,” “should,” “will,” and “could,” or the negative of these terms or words of similar meaning. These statements include expected future financial results, product offerings, global expansion, liquidity needs, financing ability, planned capital expenditures, management's or the Company’s expectations and beliefs, and similar matters discussed in this Form 10-Q. The discussions of such matters and subject areas are qualified by the inherent risks and uncertainties surrounding future expectations generally, and also may materially differ from the Company’s actual future experience.

The Company’s business, operations and financial performance are subject to certain risks and uncertainties, which could result in material differences in actual results from the Company’s current expectations. These risks and uncertainties include, but are not limited to, general economic conditions, in particular relating to the automotive industry, consumer demand for the Company’s and its customers’ products, competitive and technological developments, customer purchasing actions, changes in warranty provisions and customers’ product recall policies,  foreign currency fluctuations, costs of operations, the volume and scope of product returns and warranty claims and other matters described in the section titled “Risk Factors” in the Company’s Form 10-K report filed on September 4, 2015 with the Securities and Exchange Commission for the year ended June 28, 2015.

Shareholders, potential investors and other readers are urged to consider these factors carefully in evaluating the forward-looking statements and are cautioned not to place undue reliance on such forward-looking statements. The forward-looking statements made herein are only made as of the date of this Form 10-Q and the Company undertakes no obligation to publicly update such forward-looking statements to reflect subsequent events or circumstances occurring after the date of this Form 10-Q.

 

 

 

 

---

 

Item 1 Financial Statements

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

Condensed Consolidated Statements of Income and Comprehensive Income

(In Thousands, Except Per Share Amounts)

(Unaudited)

 

 

 

 

 

 

 

 

 

 

 

The accompanying notes are an integral part of these Condensed Consolidated Statements of Income and Comprehensive Income.

 

 

3

---

 

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

Condensed Consolidated Balance Sheets

(In Thousands, Except Share Amounts)

 

 

 

 

The accompanying notes are an integral part of these Condensed Consolidated Balance Sheets.

 

 

 

4

---

 

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

Condensed Consolidated Statements of Cash Flows

(In Thousands)

(Unaudited)

 

 

 

 

 

 

 

The accompanying notes are an integral part of these Condensed Consolidated Statements of Cash Flows.

 

 

5

---

 

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

Notes to Condensed Consolidated Financial Statements

(Unaudited)

Basis of Financial Statements

STRATTEC SECURITY CORPORATION designs, develops, manufactures and markets automotive access control products including mechanical locks and keys, electronically enhanced locks and keys, steering column and instrument panel ignition lock housings, latches, power sliding door systems, power lift gate systems, power deck lid systems, door handles and related products for primarily North American automotive customers. We also supply global automotive manufacturers through a unique strategic relationship with WITTE Automotive (“WITTE”) of Velbert, Germany, and ADAC Automotive (“ADAC”) of Grand Rapids, Michigan. Under this relationship, STRATTEC, WITTE and ADAC market the products of each company to global customers under the “VAST” brand name. STRATTEC products are shipped to customer locations in the United States, Canada, Mexico, Europe, South America, Korea, China and India, and we provide full service and aftermarket support for our products. We also maintain a 51 percent interest in a joint venture, STRATTEC Advanced Logic LLC, which exists to introduce a new generation of biometric security products based on the designs of Actuator Systems, our partner and the owner of the remaining ownership interest.

The accompanying condensed consolidated financial statements reflect the consolidated results of STRATTEC SECURITY CORPORATION, its wholly owned Mexican subsidiary, STRATTEC de Mexico, and its majority owned subsidiaries, ADAC-STRATTEC, LLC and STRATTEC POWER ACCESS LLC. STRATTEC SECURITY CORPORATION is located in Milwaukee, Wisconsin. STRATTEC de Mexico is located in Juarez, Mexico. ADAC-STRATTEC, LLC and STRATTEC POWER ACCESS LLC have operations in El Paso, Texas and Juarez, Mexico. Equity investments in Vehicle Access Systems Technology LLC (“VAST LLC”) and STRATTEC Advanced Logic, LLC (“SAL LLC”) for which we exercise significant influence but do not control and are not the primary beneficiary, are accounted for using the equity method. VAST LLC consists primarily of three wholly owned subsidiaries in China, one wholly owned subsidiary in Brazil and one joint venture entity in India. SAL LLC is located in El Paso, Texas. We have only one reporting segment.

In the opinion of management, the accompanying condensed consolidated balance sheets as of March 27, 2016 and June 28, 2015, which has been derived from our audited financial statements, and the related unaudited interim condensed consolidated financial statements included herein contain all adjustments, consisting only of normal recurring items, necessary for their fair presentation in conformity with accounting principles generally accepted in the United States of America (“U.S. GAAP”) and in accordance with Rule 10-01 of Regulation S-X. All significant intercompany transactions have been eliminated.

Interim financial results are not necessarily indicative of operating results for an entire year. The information included in this Form 10-Q should be read in conjunction with Management’s Discussion and Analysis and the financial statements and notes thereto included in the STRATTEC SECURITY CORPORATION 2015 Annual Report, which was filed with the Securities and Exchange Commission as an exhibit to our Form 10-K on September 4, 2015.

 

 

New Accounting Standards

In May 2014, the FASB issued an update to the accounting guidance for the recognition of revenue arising from contracts with customers. The update supersedes most current revenue recognition guidance and outlines a single comprehensive model for revenue recognition based on the principle that an entity should recognize revenue in an amount that reflects the expected consideration to be received in the exchange of goods and services. The guidance update also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts. The guidance update is effective for annual reporting periods beginning after December 15, 2017 and becomes effective for us at the beginning of our 2019 fiscal year. We are currently assessing the impact that this guidance will have on our condensed consolidated financial statements.

In August 2014, the FASB issued an update to the accounting guidance on determining when and how to disclose going-concern uncertainties in the financial statements. The new guidance requires management to perform interim and annual assessments of an entity’s ability to continue as a going concern within one year of the date the financial statements are issued.  An entity must provide certain disclosures if conditions or events raise substantial doubt about the entity’s ability to continue as a going concern. This accounting update is effective for annual and interim periods beginning on or after December 15, 2016, with early adoption permitted.  We do not expect that the adoption of this pronouncement will have a material impact on our condensed consolidated financial statements.

6

---

 

In February 2015, the FASB issued an update to the accounting guidance that amends current consolidation guidance by modifying the evaluation of whether limited partnerships and similar legal entities are variable interest entities or voting interest entities, eliminating the presumption that a general partner should consolidate a limited partnership, and affects the consolidation analysis of reporting entities that are involved with variable interest entities. The update is effective for interim and annual reporting periods beginning after December 15, 2015, with early adoption permitted. The adoption of this pronouncement has not had a material impact on our condensed consolidated financial statements.

In July 2015, the FASB issued an accounting standard to simplify the measurement of inventory by changing the subsequent measurement guidance from the lower of cost or market to the lower of cost and net realizable value for inventory. The standard update is effective for fiscal years beginning after December 15, 2016 and interim periods within those years, and early adoption is permitted. The standard is to be applied prospectively. We do not expect that the adoption of this pronouncement will have a material impact on our condensed consolidated financial statements.

In November 2015, the FASB issued an update to an accounting standard to simplify the presentation of deferred income taxes by requiring that deferred tax assets and liabilities be classified as non-current in a classified statement of financial position, which would be a change from our historical presentation whereby certain of our deferred tax assets and liabilities were classified as current and the remainder were classified as non-current. The standard update is effective for fiscal years beginning after December 15, 2016 and interim periods within those years, and early adoption is permitted. The standard is to be applied either prospectively to all deferred tax assets and liabilities or retrospectively to all periods presented. We do not expect that the adoption of this pronouncement will have a material impact on our condensed consolidated financial statements.

In February 2016, the FASB issued an update to an accounting guidance for leases. The update increases the transparency and comparability among organizations by requiring lessees to recognize lease assets and lease liabilities on the balance sheet and to disclose key information about leasing arrangements. The guidance is effective for fiscal years beginning after December 15, 2018 and interim periods within those years. We are currently assessing the impact that this guidance will have on our condensed consolidated financial statements.

In March 2016, the FASB issued an update to an accounting guidance for share-based payments. The update simplifies several aspects of the accounting for employee share-based payment transactions including the accounting for income taxes, forfeitures, and statutory tax withholding requirements, as well as classification of such items in the statement of cash flows. The guidance is effective for fiscal years beginning after December 15, 2016 and interim periods within those years. We are currently assessing the impact that this guidance will have on our condensed consolidated financial statements.

 

 

Subsequent Event

Effective April 27, 2016, the ADAC STRATTEC Credit Facility, as discussed under Credit Facilities and Guarantees herein, was amended to increase available borrowings under the facility from $10 million to $20 million. The amended credit facility expires August 1, 2019. Under the terms of the amended credit agreement, a capital contribution to ADAC-STRATTEC LLC of $6 million collectively from STRATTEC and ADAC is required to be completed by September 30, 2016. STRATTEC’s portion of the required capital contribution will be $3.06 million.

 

 

Derivative Instruments

We own and operate manufacturing operations in Mexico.  As a result, a portion of our manufacturing costs are incurred in Mexican pesos, which causes our earnings and cash flows to fluctuate due to changes in the U.S. dollar/Mexican peso exchange rate.  As of March 27, 2016, we have executed contracts with Bank of Montreal that provide for bi-weekly and monthly Mexican peso currency forward contracts for a portion of our estimated peso denominated operating costs. The current peso currency forward contracts include settlement dates that began on October 16, 2015 and end on June 15, 2017. No forward contracts were in place during fiscal 2015 or outstanding as of June 28, 2015. Our objective in entering into these currency forward contracts is to minimize our earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. The Mexican peso forward contracts are not used for speculative purposes and are not designated as hedges.  As a result, all currency forward contracts are recognized in our accompanying condensed consolidated financial statements at fair value and changes in the fair value are reported in current earnings as part of Other Income, net.

7

---

 

The following table quantifies the outstanding Mexican peso forward contracts as of March 27, 2016 (thousands of dollars, except average forward contractual exchange rates):

The fair market value of all outstanding Mexican peso forward contracts in the accompanying Condensed Consolidated Balance Sheets was as follows (thousands of dollars):

 

 

The pre-tax effects of the Mexican peso forward contracts are included in Other Income, net on the accompanying Condensed Consolidated Statements of Operations and Comprehensive Income and consisted of the following (thousands of dollars):

 

 

 

 

Fair Value of Financial Instruments

The fair value of our cash and cash equivalents, accounts receivable, accounts payable and borrowings under our credit facility approximated book value as of March 27, 2016 and June 28, 2015. Fair value is defined as the exchange price that would be received for an asset or paid for a liability in the principal or most advantageous market in an orderly transaction between market participants on the measurement date.

The following table summarizes our financial assets and liabilities measured at fair value on a recurring basis as of March 27, 2016 (in thousands):

 

 

8

---

 

The Rabbi Trust assets fund our amended and restated supplemental executive retirement plan and are included in Other Long-term Assets in the accompanying Condensed Consolidated Balance Sheets. Refer to discussion of Mexican peso forward contracts under Derivative Instruments above. The fair value of the Mexican peso forward contracts considers the remaining term, current exchange rate, and interest rate differentials between the two currencies. There were no transfers between Level 1 and Level 2 assets during the nine month period ended March 27, 2016.

 

 

Equity (Loss) Earnings of Joint Ventures

We hold a one-third interest in a joint venture company, VAST LLC, with WITTE and ADAC. VAST LLC exists to seek opportunities to manufacture and sell all three companies’ products in areas of the world outside of North America and Europe. Our investment in VAST LLC, for which we exercise significant influence but do not control and are not the primary beneficiary, is accounted for using the equity method.

The following are summarized statements of operations for VAST LLC (in thousands):  

 

 

During 2013, we acquired a 51% ownership interest in a newly formed joint venture company, SAL LLC, which was formed to introduce a new generation of biometric security products based upon the designs of Actuator Systems LLC, our partner and the owner of the remaining ownership interest. SAL LLC had a $1.5 million revolving credit facility (the “SAL Credit Facility”) with BMO Harris Bank N.A., which was fully guaranteed by STRATTEC. The SAL Credit Facility had a maturity date of February 16, 2016. Outstanding borrowings under the SAL Credit Facility as of February 16, 2016 and June 28, 2015 totaled $1.5 million and $995,000, respectively. SAL LLC did not have cash available to pay the outstanding debt balance as of the maturity date. Therefore, STRATTEC made a payment of $1.5 million on its guarantee on February 16, 2016. SAL LLC is considered a variable interest entity based on the STRATTEC guarantee. STRATTEC is not the primary beneficiary and does not control the entity. Accordingly, our investment in SAL LLC is accounted for using the equity method. Prior to making the guarantee payment, STRATTEC had a recorded liability related to the guarantee of $1.5 million and $995,000 at February 16, 2016 and June 28, 2015, respectively, which amounts were equal to the estimated fair value of the guarantee as of these dates. As of June 28, 2015, the guarantee liability was included in Other Current Liabilities in the accompanying Condensed Consolidated Balance Sheets. STRATTEC’s proportionate share of the guarantee based on our ownership percentage in SAL LLC totaled $765,000 and $507,000, respectively, as of February 16, 2016 and June 28, 2015, and accordingly, our investment in SAL LLC included these amounts as of these dates. Our joint venture partner did not guarantee their proportionate share of the SAL Credit Facility. As a result, we recorded a loss equal to our partner’s proportionate share of the fair value of the STRATTEC guarantee based upon our partner’s ownership interest in the joint venture of $488,000 during fiscal 2015 and $247,000 during the nine months ended March 27, 2016.

SAL LLC maintains a license agreement with Westinghouse allowing SAL LLC to do business as Westinghouse Security. Payments due Westinghouse under the license agreement were guaranteed by STRATTEC. As of March 27, 2016 and June 28, 2015, STRATTEC has a recorded liability equal to the estimated fair value of the future payments due under this guarantee of $250,000. The liability is included in Other Long-term Liabilities in the accompanying Condensed Consolidated Balance Sheets. STRATTEC’s proportionate share of the guarantee of these payments based on our ownership percentage in SAL LLC totals $127,000, and accordingly, our investment in SAL LLC as of March 27, 2016 and June 28, 2015 included this amount. Our joint venture partner did not guarantee their proportionate share of the payments required under the license agreement. As a result, we recorded a loss of $123,000 during the fourth quarter of fiscal 2015 which was equal to our partner’s proportionate share, based upon their ownership interest in the joint venture, of the fair value of the STRATTEC guarantee.

9

---

 

During fiscal 2015 and during the nine months ended March 27, 2016, loans were made from STRATTEC to SAL LLC in support of operating expenses and working capital needs. The outstanding loan amounts totaled $250,000 and $100,000 as of March 27, 2016 and June 28, 2015, respectively. A valuation reserve of $250,000 and $100,000 was recorded on STRATTEC’s financial statements as of March 27, 2016 and June 28, 2015, respectively, in connection with these loans. The corresponding loss related to this valuation reserve was included in Equity (Loss) Earnings of Joint Ventures in the accompanying Condensed Consolidated Statements of Income and Comprehensive Income in each respective period.

Notwithstanding the existence of the SAL Credit Facility described herein, as a result of STRATTEC’s guarantee of such credit facility and as a result of borrowing limitations imposed by the bank under such credit facility, effective with our fiscal 2015 fourth quarter, 100 percent of the funding for SAL LLC was being made by STRATTEC through loans and guarantees. Therefore, effective with our fiscal 2015 fourth quarter, STRATTEC began recognizing 100 percent of the losses of SAL LLC through Equity (Loss) Earnings of Joint Ventures in the accompanying Condensed Consolidated Statements of Income and Comprehensive Income.

The following are summarized statements of operations for SAL, LLC (in thousands):

 

 

We have sales of component parts to VAST LLC and SAL LLC, purchases of component parts from VAST LLC, expenses charged to VAST LLC for engineering and accounting services and expenses charged to us from VAST LLC for general headquarters expenses.  The following table summarizes these related party transactions with VAST LLC and SAL LLC for the periods indicated below (in thousands):

 

 

 

Warranty

We have a warranty liability recorded related to our known and potential exposure to warranty claims in the event our products fail to perform as expected, and in the event we may be required to participate in the repair costs incurred by our customers for such products. During the nine month period ended March 27, 2016, the warranty liability was reduced by approximately $2.05 million as a result of the settlement of a previously accrued customer warranty issue.

 

 

10

---

 

Credit Facilities and Guarantees

STRATTEC has a $30 million secured revolving credit facility (the “STRATTEC Credit Facility”) with BMO Harris Bank N.A. As of March 27, 2016, ADAC-STRATTEC LLC had a $10 million secured revolving credit facility (the “ADAC-STRATTEC Credit Facility”) with BMO Harris Bank N.A. Effective April 27, 2016, the ADAC-STRATTEC Credit Facility was amended to increase the available borrowings under the credit facility from $10 million to $20 million. The ADAC-STRATTEC Credit Facility is guaranteed by STRATTEC. Refer to discussion under Subsequent Events included herein. The STRATTEC credit facility expires August 1, 2018. The amended ADAC-STRATTEC Credit Facility expires August 1, 2019. Borrowings under either credit facility are secured by our cash balances, accounts receivable, inventory and fixed assets located in the U.S. Interest on borrowings under both credit facilities is at varying rates based, at our option, on the London Interbank Offering Rate (“LIBOR”) plus 1.0 percent or the bank’s prime rate. Both credit facilities contain a restrictive financial covenant that requires the applicable borrower to maintain a minimum net worth level. The ADAC-STRATTEC Credit Facility includes an additional restrictive financial covenant that requires the maintenance of a minimum fixed charge coverage ratio. As of March 27, 2016, we were in compliance with all financial covenants.

Outstanding borrowings under the credit facilities were as follows (in thousands): 

 

 

Average outstanding borrowings and the weighted average interest rate under each credit facility referenced above were as follows for each period presented (in thousands):

 

 

SAL LLC had a $1.5 million revolving credit facility (the “SAL Credit Facility’) with BMO Harris Bank N.A., which was fully guaranteed by STRATTEC. Interest on borrowings under the SAL Credit Facility was at varying rates based, at SAL LLC’s option, on LIBOR plus 1.0 percent or the bank’s prime rate. The SAL Credit Facility had a maturity date of February 16, 2016. Outstanding borrowings under the SAL Credit Facility as of the maturity date totaled $1.5 million. SAL LLC did not have cash available to pay the outstanding debt balance as of the maturity date. Therefore, STRATTEC made a payment of $1.5 million on the guarantee on February 16, 2016.

SAL LLC maintains a license agreement with Westinghouse allowing SAL LLC to do business as Westinghouse Security. STRATTEC guaranteed all payments due Westinghouse under this license agreement. As of March 27, 2016, STRATTEC has a recorded liability related to this guarantee of $250,000, which amount is equal to the amount of future payments required under the license agreement and the estimated fair value of the guarantee as of March 27, 2016. See further discussion under Equity (Loss) Earnings of Joint Ventures included herein.

    

 

Commitments and Contingencies

We are from time to time subject to various legal actions and claims incidental to our business, including those arising out of alleged defects, alleged breaches of contracts, product warranties, intellectual property matters and employment related matters. It is our opinion that the outcome of such matters will not have a material adverse impact our consolidated financial position, results of operations or cash flows. With respect to warranty matters, although we cannot ensure that future costs of warranty claims by customers will not be material, we believe our established reserves are adequate to cover potential warranty settlements.

On March 17, 2016, ADAC STRATTEC de Mexico (ASdM), a wholly owned subsidiary of ADAC-STRATTEC LLC, which is a joint venture between STRATTEC SECURITY CORPORATION and ADAC Automotive, purchased land in Leon, Mexico. ASdM intends to construct a new manufacturing facility on this land in the mid-Mexico area. This facility is expected to be used primarily to paint and assemble door handle products. Currently, the ADAC-STRATTEC LLC joint venture has net sales of approximately $60 million. With newly awarded customer business, we anticipate net sales will increase to approximately $120 million within the next two years. Total capital expenditures required for the land, facility, paint system, and assembly equipment is expected to total approximately $22 million. We anticipate financing the required capital expenditures through a combination of partner capital contributions, bank loans, and current operating cash flow.

11

---

 

In 1995, we recorded a provision of $3 million for estimated costs to remediate an environmental contamination site at our Milwaukee facility. The facility was contaminated by a solvent spill, which occurred in 1985, from a former above ground solvent storage tank located on the east side of the facility. The reserve was originally established based on third party estimates to adequately cover the cost for active remediation of the contamination. Due to changing technology and related costs associated with active remediation of the contamination, an updated analysis and estimate was obtained during fiscal 2010. As a result of this analysis, the reserve was reduced by approximately $1.1 million, to $1.5 million in 2010, to reflect the revised monitoring and remediation cost estimate. From 1995 through March 27, 2016, costs of approximately $507,000 have been incurred related to the installation of monitoring wells on the property and ongoing monitoring costs. We continue to monitor and evaluate the site with the use of these groundwater monitoring wells. An environmental consultant samples these wells one or two times a year to determine the status of the contamination and the potential for remediation of the contamination by natural attenuation, the dissipation of the contamination over time to concentrations below applicable standards. If such sampling evidences a sufficient degree of and trend toward natural attenuation of the contamination at the site, we may be able to obtain a closure letter from the regulatory authorities resolving the issue without the need for active remediation. If a sufficient degree and trend toward natural attenuation is not evidenced by sampling, a more active form of remediation beyond natural attenuation may be required. The sampling has not yet satisfied all of the requirements for closure by natural attenuation. As a result, sampling continues and the reserve remains at an amount to reflect the estimated cost of active remediation. The reserve is not measured on a discounted basis. We believe, based on findings-to-date and known environmental regulations, that the remaining environmental reserve of $1.4 million at March 27, 2016 is adequate.

 

 

Shareholders’ Equity

A summary of activity impacting shareholders’ equity for the nine month period ended March 27, 2016 was as follows (in thousands):

 

 

Other Income, net

Net other income included in the accompanying Condensed Consolidated Statements of Income and Comprehensive Income primarily included foreign currency transaction gains and losses, realized and unrealized losses on peso forward contracts and Rabbi Trust gains and losses. Foreign currency transaction gains and losses resulted from activity associated with foreign denominated assets held by our Mexican subsidiaries. We entered into the Mexican Peso currency forward contracts to minimize earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. The Rabbi Trust assets fund our amended and restated supplemental executive retirement plan. The investments held in this Trust are considered trading securities.

The impact of these items for each of the periods presented was as follows (in thousands):

 

 

12

---

 

Income Taxes

The income tax provisions for the three and nine month periods ended March 27, 2016 were impacted by a larger portion of our pre-tax income being attributed to the non-controlling interest during each period as compared to the corresponding prior year periods as well as an increase in income subject to tax in foreign taxing jurisdictions, which have lower statutory rates than in the U.S. The non-controlling interest impacts the effective tax rate as the ADAC-STRATTEC LLC and STRATTEC POWER ACCESS LLC entities are taxed as partnerships for U.S. tax purposes. Our income tax provision for the three and nine month periods ended March 29, 2015, included a reduction in our liability for unrecognized tax benefits and related interest of approximately $936,000. The nine month period ended March 27, 2016 did not include an adjustment to our liability for unrecognized tax benefits.

 

 

Earnings Per Share (EPS)

Basic earnings per share is computed on the basis of the weighted average number of shares of common stock outstanding during the applicable period. Diluted earnings per share is computed on the basis of the weighted average number of shares of common stock plus the potential dilutive common shares outstanding during the applicable period using the treasury stock method. Potential dilutive common shares include outstanding stock options and unvested restricted stock awards.

A reconciliation of the components of the basic and diluted per-share computations follows (in thousands, except per share amounts):

 

We consider unvested restricted stock that provides the holder with a non-forfeitable right to receive dividends to be a participating security.

As of March 27, 2016 and as of March 29, 2015, options to purchase 9,010 shares of common stock were excluded from the calculation of diluted earnings per share because their inclusion would have been anti-dilutive.

 

 

Stock-based Compensation

We maintain an omnibus stock incentive plan. This plan provides for the granting of stock options, shares of restricted stock and stock appreciation rights. As of March 27, 2016, the Board of Directors had designated 1,850,000 shares of common stock available for the grant of awards under the plan. Remaining shares available to be granted under the plan as of March 27, 2016 were 229,489. Awards that expire or are canceled without delivery of shares become available for re-issuance under the plan. We issue new shares of common stock to satisfy stock option exercises.

13

---

 

Nonqualified and incentive stock options and shares of restricted stock have been granted to our officers, outside directors and specified employees under our stock incentive plan. Stock options granted under the plan may not be issued with an exercise price less than the fair market value of the common stock on the date the option is granted. Stock options become exercisable as determined at the date of grant by the Compensation Committee of the Board of Directors. The options expire 10 years after the grant date unless an earlier expiration date is set at the time of grant. The options generally vest 1 to 4 years after the date of grant. Shares of restricted stock granted under the plan are subject to vesting criteria determined by the Compensation Committee of the Board of Directors at the time the shares are granted and have a minimum vesting period of three years from the date of grant. Restricted shares granted have voting rights, regardless if the shares are vested or unvested. Restricted shares granted prior to August 2014 have dividend rights, regardless if the shares are vested or unvested. Commencing in August 2014 and thereafter, shares of restricted stock awarded to participants are not entitled to receive any cash dividends if they are unvested as of the record date. The restricted stock grants issued to date vest 3 to 5 years after the date of grant.

The fair value of each stock option grant was estimated as of the date of grant using the Black-Scholes pricing model. The resulting compensation cost for fixed awards with graded vesting schedules is amortized on a straight line basis over the vesting period for the entire award. The fair value of each restricted stock grant was based on the market price of the underlying common stock as of the date of grant. The resulting compensation cost is amortized on a straight line basis over the vesting period.

A summary of stock option activity under our stock incentive plan for the nine months ended March 27, 2016 was as follows:

 

 

The intrinsic value of stock options exercised and the fair value of stock options vesting during the three and nine month periods presented below was as follows (in thousands):

 

No options were granted during the nine month period ended March 27, 2016. The grant date fair value and assumptions used to determine compensation expense for the options granted during the nine month period ended March 29, 2015 were as follows:

 

 

14

---

 

A summary of restricted stock activity under our omnibus stock incentive plan for the nine months ended March 27, 2016 was as follows:

 

As of March 27, 2016, there was $221,971 of total unrecognized compensation cost related to outstanding stock options granted under our omnibus stock incentive plan. This cost is expected to be recognized over a remaining weighted average period of 0.6 years. As of March 27, 2016, there was approximately $2.1 million of total unrecognized compensation cost related to unvested restricted stock grants outstanding under the plan. This cost is expected to be recognized over a remaining weighted average period of 1.2 years. Total unrecognized compensation cost will be adjusted for any future changes in estimated and actual forfeitures of awards granted under our omnibus stock incentive plan.

 

 

Pension and Postretirement Benefits

We have a qualified, noncontributory defined benefit pension plan (“Qualified Pension Plan”) covering substantially all U.S. associates. Benefits are based on years of service and final average compensation. Our policy is to fund at least the minimum actuarially computed annual contribution required under the Employee Retirement Income Security Act of 1974 (ERISA). Plan assets consist primarily of listed equity and fixed income securities. Effective December 31, 2009, an amendment to the Qualified Pension Plan discontinued the benefit accruals for salary increases and credited service rendered after that date.  On April 2, 2014, our Board of Directors approved a resolution to terminate the Qualified Pension Plan.  The termination of the Qualified Pension Plan is subject to the Internal Revenue Service’s (“IRS”) determination that the Qualified Pension Plan is qualified on termination.  We believe it will take 18 to 24 months to finalize the complete termination of the Qualified Pension Plan after obtaining IRS approval.  We have not yet received IRS approval that the qualified plan is qualified on termination. Additionally, we have amended the Qualified Pension Plan to provide that participants are 100 percent vested in their accrued benefits as of the effective date of the plan termination, to adopt a new standard for disability benefits that will apply when the plan’s assets are distributed due to the termination, to add a lump sum distribution for employees and terminated vested participants who are not in payment status when Qualified Pension Plan assets are distributed due to the termination and to make certain other conforming amendments to the Qualified Pension Plan to comply with applicable laws that may be required by the IRS or may be deemed necessary or advisable to improve the administration of the Qualified Pension Plan or facilitate its termination and liquidation.  We also intend to make contributions to the Trust Fund for the Qualified Pension Plan to ensure that there are sufficient assets to provide all Qualified Pension Plan benefits as of the anticipated distribution date.  The financial impact of the plan termination will be recognized as a settlement of the Qualified Pension Plan liabilities.  The settlement date and related financial impact have not yet been determined.

We have historically had in place a noncontributory supplemental executive retirement plan (“SERP”), which prior to January 1, 2014 was a nonqualified defined benefit plan that essentially mirrored the Qualified Pension Plan, but provided benefits in excess of certain limits placed on our Qualified Pension Plan by the Internal Revenue Code.  We froze our Qualified Pension Plan effective as of December 31, 2009 and the SERP provided benefits to participants as if the Qualified Pension Plan had not been frozen.  Because the Qualified Pension Plan was frozen and because new employees were not eligible to participate in the Qualified Pension Plan, our Board of Directors adopted amendments to the SERP on October 8, 2013 that were effective as of December 31, 2013 to simplify the SERP calculation.  The SERP is funded through a Rabbi Trust with BMO Harris Bank N.A.  Under the amended SERP, participants received an accrued lump-sum benefit as of December 31, 2013 which was credited to each participant’s account.  Subsequent to December 31, 2013, each eligible participant receives a supplemental retirement benefit equal to the foregoing lump sum benefit, plus an annual benefit accrual equal to 8 percent of the participant’s base salary and cash bonus, plus annual credited interest on the participant’s account balance.  All then current participants as of December 31, 2013 are fully vested in their account balances with any new individuals participating in the SERP effective on or after January 1, 2014 being subject to a five year vesting period.  The SERP, which is considered a defined benefit plan under applicable rules and regulations of the Internal Revenue Code, will continue to be funded through use of a Rabbi Trust to hold investment assets to be used in part to fund any future required lump sum benefit payments to participants.  The foregoing amendments to the SERP did not have a material effect on our financial statements.  The Rabbi Trust assets had a value of $2.2 million at March 27, 2016 and $2.3 million at June 28, 2015, respectively, and are included in Other Long-Term Assets in the accompanying Condensed Consolidated Balance Sheets.

15

---

 

We also sponsor a postretirement health care plan for all U.S. associates hired prior to June 1, 2001. The expected cost of retiree health care benefits is recognized during the years the associates who are covered under the plan render service. Effective January 1, 2010, an amendment to the postretirement health care plan limited the benefit for future eligible retirees to $4,000 per plan year and is subject to a maximum five year coverage period based on the associate’s retirement date and age. The postretirement health care plan is unfunded.

Net periodic benefit costs under these plans are allocated between Cost of Goods Sold and Engineering, Selling and Administrative Expenses in the accompanying Condensed Consolidated Statements of Income and Comprehensive Income.

The following tables summarize the net periodic benefit cost recognized for each of the periods indicated under these plans (in thousands):

 

 

 

 

 

Voluntary contributions of $3 million were made to the Qualifies Pension Plan during the nine month period ended March 27, 2016. No contributions were made to the Qualified Pension Plan during the nine month periods ended March 29, 2015. No additional contributions are anticipated to be made during the remainder of fiscal 2016.

 

 

 

16

---

 

Accumulated Other Comprehensive Loss

The following table summarizes the changes in accumulated other comprehensive loss (“AOCL”) for each period presented (in thousands):

 

 

 

 

 

 

17

---

 

Item 2

STRATTEC SECURITY CORPORATION AND SUBSIDIARIES

MANAGEMENT’S DISCUSSION AND ANALYSIS

OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following Management’s Discussion and Analysis should be read in conjunction with STRATTEC SECURITY CORPORATION’s accompanying Condensed Consolidated Financial Statements and Notes thereto and its 2015 Annual Report which was filed with the Securities and Exchange Commission as an exhibit to its Form 10-K on September 4, 2015. Unless otherwise indicated, all references to years refer to fiscal years.

Outlook

During the first nine months of fiscal year 2016, we continued to experience stronger sales demand for our components from our major North American automotive customers, Fiat Chrysler Automobiles, General Motors Company and Ford Motor Company, as it relates to light trucks and both sport and car based utility vehicles in comparison to passenger cars, which was likely influenced by lower gas prices. If gas prices continue to remain low over the next nine months, we anticipate this consumer buying trend to continue through the remainder of the 2016 calendar year.

Analysis of Results of Operations

Three months ended March 27, 2016 compared to the three months ended March 29, 2015

 

 

Net sales to each of our customers or customer groups in the current year quarter and prior year quarter were as follows (in millions): 

 

Sales to Fiat Chrysler Automobiles in the current year quarter increased slightly. During the current year quarter, Fiat Chrysler Automobiles temporarily shutdown production of the Chrysler 200 and Dodge Journey at its Sterling Heights, Michigan, and Toluca, Mexico, assembly plants which are primarily responsible for production of the Chrysler 200 and Dodge Journey. This shutdown reduced our sales by $4.5 million during the current year quarter. During the prior year quarter, Fiat Chrysler implemented a temporary shutdown at its Windsor, Canada assembly plant to re-tool for the production of the new Chrysler Pacifica minivan. The negative effect of that shutdown during the prior year quarter was partially offset by increased service sales during the prior year quarter in comparison to the current year quarter. These two items reflected a reduction in sales to Fiat Chrysler Automobiles between the current year quarter and prior year quarter of $6.5 million. Increased sales to General Motors Company in the current year quarter over the prior year quarter related to a $3.3 million sales concession that we granted to General Motors during the prior year quarter partially offset by $1.1 million of agreed upon price reductions, which became effective at the start of the new calendar year, that impacted the current year quarter sales levels. Increased sales to Ford Motor Company in the current year quarter as compared to the prior year quarter were attributed to higher vehicle production volumes and content on models for which we supply components, in particular for components we supply for F-150 pick-up trucks.  Sales to Tier 1 customers decreased in the current year quarter as compared to the prior year quarter due to lower production volume on passenger cars for which we supply driver control and door handle components. Sales to commercial and other OEM Customers during the current year quarter increased in comparison to the prior year quarter.  These customers primarily represent purchasers of vehicle access control products, such as latches and fobs that have been developed in recent years to complement our historic core business of locks and keys.  The increased sales to Hyundai / Kia in the current year quarter were due to higher vehicle production on the Kia Sedona minivan for which we supply components.

18

---

 

 

Direct material costs are the most significant component of our cost of goods sold and comprised $53.2 million or 66.9 percent of cost of goods sold in the current year quarter compared to $47.9 million or 65.6 percent of cost of goods sold in the prior year quarter. The increase in material costs of $6.4 million or 8.8 percent was due to increased sales volumes in the current year period as compared to the prior year period. The increase in direct material costs, and the increase in material costs as a percentage of cost of goods sold between these quarterly periods, was also impacted by our product sales mix in the current year quarter as compared to the prior year quarter. The current year quarter included increased sales of power access products as compared to the prior year quarter. Power access products typically have a higher purchased content percentage as compared to our other access control products.

The remaining components of cost of goods sold consist of labor and overhead costs which increased $1.1 million or 4.4 percent in the current year quarter as compared to the prior year quarter as the variable portion of these costs increased due to the increased sales volumes in the current year quarter. In addition, the current year quarter as compared to the prior year quarter included higher depreciation expense, higher repair and maintenance costs, and higher costs associated with diversifying our products portfolio. These increased costs were partially offset by a reduction of approximately $2.1 million in the U.S. dollar value of our Mexican operations due to a favorable Mexican peso to U.S. dollar exchange rate between these quarterly periods. The average U.S. dollar / Mexican peso exchange rate increased to approximately 17.91 pesos to the dollar in the current year quarter from approximately 14.96 pesos to the dollar in the prior year quarter.

 

 

The reduction in gross profit and gross profit as a percentage of net sales in the current year quarter as compared to the prior year quarter were the result of agreed upon customer price reductions that became effective at the start of the new calendar year, higher depreciation expense, higher repair and maintenance costs, and higher costs associated with diversifying our product portfolio, partially offset by a favorable Mexican peso to U.S. dollar exchange rate affecting the cost of our Mexican operations, all as discussed above.

Engineering, selling and administrative expenses in the current year quarter and prior year quarter were as follows:

 

 

Engineering, selling and administrative expenses increased approximately $900,000 between periods. The increase in these costs in the current year quarter as compared to the prior year quarter was due to higher new product program development costs for which we are utilizing third party vendors for a portion of the development work.

Income from operations in the current year quarter was $3.8 million compared to $5.9 million in the prior year quarter. This reduction was the result of a reduction in our gross profit and an increase in engineering, selling and administrative expenses in the current year quarter as compared to the prior year quarter as discussed above.  

The equity loss of joint ventures was comprised of the following in the current year quarter and prior year quarter (in thousands):

 

 

19

---

 

VAST LLC’s operations in both China and Brazil were negatively impacted during the current year quarter by both a slow-down in automotive sales and impacts of foreign currency as it relates to purchases of components outside of their local markets. During the nine months ended March 27, 2016, capital contributions totaling $660,000 were made to VAST LLC for purposes of funding operations in Brazil. STRATTEC’s portion of the capital contributions totaled $220,000. Additionally, we anticipate VAST do Brasil will require a capital contribution of approximately $600,000 collectively by all VAST partners to fund operations during the remainder of calendar 2016. STRATTEC’s portion of the capital contributions is anticipated to be $200,000.

STRATTEC is not the primary beneficiary and does not control STRATTEC Advanced Logic, LLC (“SAL LLC”). Accordingly, our investment in SAL LLC is accounted for using the equity method. Effective with our fiscal 2015 fourth quarter, 100 percent of the funding for SAL LLC was being made through loans from STRATTEC to SAL LLC and through STRATTEC’s guarantee of the SAL Credit Facility which is discussed herein. Therefore, effective with our fiscal 2015 fourth quarter, even though STRATTEC maintains a 51 percent ownership interest in SAL LLC, STRATTEC began recognizing 100 percent of the losses of SAL LLC. In addition, the equity loss of joint ventures for SAL LLC included the following for the periods presented (thousands of dollars): 

 

SAL LLC had a $1.5 million revolving credit facility with BMO Harris Bank N.A., which was fully guaranteed by STRATTEC. The SAL Credit Facility had a maturity date of February 16, 2016. Outstanding borrowings under the SAL Credit Facility as of February 16, 2016 totaled $1.5 million. SAL LLC did not have cash available to pay the outstanding debt balance as of the maturity date. Therefore, STRATTEC made a payment of $1.5 million on the guarantee on February 16, 2016. Prior to making this guarantee payment, STRATTEC had a recorded liability related to the guarantee of $1.5 million at February 16, 2016, which amount was equal to the estimated fair value of the guarantee as of this date. STRATTEC’s proportionate share of the guarantee based on our ownership percentage in SAL LLC totaled $765,000 as of February 16, 2016, and accordingly we have increased our investment in SAL LLC by this amount. Our joint venture partner did not guarantee their proportionate share of the SAL Credit Facility. As a result, we recorded a loss equal to our partner’s proportionate share of the fair value of the STRATTEC guarantee based upon our partner’s ownership interest in the joint venture of $488,000 during fiscal 2015 and $247,000 during the nine months ended March 27, 2016. $196,000 of the $247,000 impacted the current year quarter.

Included in other income, net in the current year quarter and prior year quarter were the following items (in thousands):

 

 

Foreign currency transaction gains during the current year quarter resulted from activity associated with foreign denominated assets held by our Mexican subsidiaries. We entered into the Mexican Peso currency forward contracts to minimize earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. Our Rabbi Trust assets fund our amended and restated supplemental executive retirement plan. The investments held in the Trust are considered trading securities.  

Our effective tax rate was 15.2 percent for the current year quarter compared to 16.5 percent for the prior year quarter. Our income tax provision for the current year quarter was affected by the increased impact of the non-controlling interest as well as an increase in income subject to tax in foreign taxing jurisdictions, which have lower statutory rates than in the U.S. The non-controlling interest impacts the effective tax rate as ADAC-STRATTEC LLC and STRATTEC POWER ACCESS LLC entities are taxed as partnerships for U.S. tax purposes. Our income tax provision for the three month period ended March 29, 2015, included a reduction in our liability for unrecognized tax benefits and related interest of approximately $936,000, which reduced our effective tax rate for that period. Our current year quarter did not include an adjustment to our liability for unrecognized tax benefits.

20

---

 

Nine months ended March 27, 2016 compared to the nine months ended March 29, 2015

 

 

Net sales to each of our customers or customer groups in the current year period and prior year period were as follows (in millions):

 

 

The decreased sales to Fiat Chrysler Automobiles in the current year period were due to lower customer vehicle production volumes, primarily on the Dodge and Chrysler Minivans, and lower content on vehicles for which we supply components. Additionally, during the current year period, Fiat Chrysler Automobiles temporarily shutdown production at its Sterling Heights, Michigan and Toluca, Mexico assembly plants which are primarily responsible for the production of the Chrysler 200 and Dodge Journey. This shutdown reduced our sales by $4.5 million during the current year period.  During the prior year period, Fiat Chrysler implemented a temporary shutdown at its Windsor, Canada assembly plant to re-tool for production of the new Chrysler Pacifica minivan. The negative effect of that shutdown during the prior year period was offset by increased service sales during the prior year period in comparison to the current year period. The decrease in sales to General Motors Company in the current year period was attributed to incremental service parts sales of $34 million shipped in the prior year period for parts used to support a recall campaign. Those incremental sales did not continue during the current year period. In addition, the current year period included $1.1 million of agreed upon price reductions, which began January 1, 2016 while the prior year period included a $3.3 million sales concession that we granted to General Motors during the prior year period. Increased sales to Ford Motor Company in the current year period were attributed to higher vehicle production volumes and content on models for which we supply components, in particular for components we supply for F-150 pick-up trucks.  Sales to Tier 1 Customers during the current year period decreased in comparison to the prior year period due to lower production volume on passenger cars for which we supply driver control and door handle components. Sales to commercial and other OEM Customers during the current year period increased in comparison to the prior year period. These customers represent purchasers of vehicle access control products, such as latches, fobs, and driver controls, that we have developed in recent years to complement our historic core business of locks and keys.  The increase in sales to Hyundai / Kia in the current year period was principally due to higher levels of sales on the Kia Sedona minivan for which we supply components.

 

 

Direct material costs are the most significant component of our cost of goods sold and comprised $163.5 million or 67.2 percent of cost of goods sold in the current year period compared to $163.7 million or 65.3 percent of cost of goods sold in the prior year period. Direct material costs remained consistent between the current year period and the prior year period while material costs as a percent of cost of goods sold increased due to changes in our product sales mix in the current year period as compared to the prior year period. The prior year period included significantly increased sales of service parts to General Motors Company as discussed above, which typically have lower material cost percentages as compared to parts sold for new vehicle production.  Additionally, the current year period included increased sales of power access products as compared to the prior year period. Power access products typically have a higher purchased content percentage as compared to our other access control products.

21

---

 

The remaining components of cost of goods sold consist of labor and overhead costs which decreased $7.2 million or 8.3 percent in the current year period as compared to the prior year period as the variable portion of these costs decreased due to the reduction in sales volumes between the nine month periods. Also impacting the reduction in labor and overhead costs in the current year period as compared to the prior year period was a decrease of $4.1 million in expense provisions for the accrual of bonuses under our incentive bonus plans, a reduction of approximately $6.9 million in the U.S. dollar value of our Mexican operations due to a favorable Mexican peso to U.S. dollar exchange rate, and a lump sum bonus totaling $311,000 paid to our Milwaukee represented hourly workers during the prior year period resulting from the ratification of a new 4-year labor contract, which impacts were partially offset by the benefits of a more favorable absorption of the fixed portion of our labor and overhead costs during our prior year period due to the higher sales volumes in the prior year period as well as higher depreciation expense, higher repair and maintenance costs, and higher costs associated with diversifying our products portfolio. The average U.S. dollar / Mexican peso exchange rate increased to approximately 17.00 pesos to the dollar in the current year period from approximately 13.97 pesos to the dollar in the prior year period.

 

 

The reduction in gross profit in the current year period as compared to the prior year period was the result of the reduction in sales partially offset by the reduction in cost of goods sold as discussed above. The reduction in gross profit as a percentage of net sales in the current year period as compared to the prior year period was the result of reduced sales of service parts related to the General Motors customer recall campaign noted above, which typically have higher gross profit margins as compared to gross profit margins on parts sold for new vehicle production, agreed upon customer price reductions that became effective at the start of the new calendar year, reduced customer production volumes resulting in less favorable absorption of our fixed manufacturing costs, higher depreciation expense, higher repair and maintenance costs, and higher costs associated with diversifying our products portfolio. These unfavorable impacts to the gross profit margin as a percentage of net sales were partially offset by a decrease in expense provisions for the accrual of bonuses under our incentive bonus plans, a reduction in the U.S. dollar value of the cost of our Mexican operations due to a favorable Mexican peso to U.S. dollar exchange rate between these year to date periods, and a lump sum bonus paid to our Milwaukee represented hourly workers during the prior year period resulting from the ratification of a new 4-year labor contract, all as discussed above.

Engineering, selling and administrative expenses in the current year period and prior year period were as follows:

 

 

Engineering, selling and administrative expenses decreased approximately $1.0 million between periods. The reduction in these costs in the current year period as compared to the prior year period was due to a reduction of $3.4 million in expense provisions for the accrual of bonuses under our incentive bonus plans, partially offset by higher selling and engineering costs associated with current product programs as well as higher costs for new product programs for which we are utilizing third party vendors for a portion of the development work.

Income from operations in the current year period was $17.2 million compared to $28.7 million in the prior year period. This reduction was the result of decreased sales and reduced gross profit margins in the current year period as compared to the prior year period, partially offset by a reduction in engineering, selling and administrative expenses, all as discussed above.  

The equity loss of joint ventures was comprised of the following in the current year period and prior year period (in thousands):

 

 

22

---

 

VAST LLC’s operations in both China and Brazil were negatively impacted during the current year period by both a slow-down in automotive sales and impacts of foreign currency as it relates to purchases of components outside of their local markets. During the nine months ended March 27, 2016, capital contributions totaling $660,000 were made to VAST LLC for purposes of funding operations in Brazil. STRATTEC’s portion of the capital contributions totaled $220,000. Additionally, we anticipate VAST do Brasil will require a capital contribution of approximately $600,000 collectively by all VAST partners to fund operations during the remainder of calendar 2016. STRATTEC’s portion of the capital contributions is anticipated to be $200,000.

STRATTEC is not the primary beneficiary and does not control STRATTEC Advanced Logic, LLC (“SAL LLC”). Accordingly, our investment in SAL LLC is accounted for using the equity method. Effective with our fiscal 2015 fourth quarter, 100 percent of the funding for SAL LLC was being made through loans from STRATTEC to SAL LLC and through STRATTEC’s guarantee of the SAL Credit Facility which is discussed herein. Therefore, effective with our fiscal 2015 fourth quarter, even though STRATTEC maintains a 51 percent ownership interest in SAL LLC, STRATTEC began recognizing 100 percent of the losses of SAL LLC. In addition, the equity loss of joint ventures for SAL LLC included the following for the periods presented (thousands of dollars):  

 

 

During the current year period, a loan in the amount of $150,000 was made from STRATTEC to SAL LLC in support of operating expenses and working capital needs. A valuation reserve of $150,000 was recorded related to this loan. As of March 27, 2016, the outstanding loan amount from STRATTEC to SAL LLC totaled $250,000. The related valuation allowance related to this loan also totaled $250,000.

 

SAL LLC had a $1.5 million revolving credit facility with BMO Harris Bank N.A., which was fully guaranteed by STRATTEC. The SAL Credit Facility had a maturity date of February 16, 2016. Outstanding borrowings under the SAL Credit Facility as of February 16, 2016 totaled $1.5 million. SAL LLC did not have cash available to pay the outstanding debt balance as of the maturity date. Therefore, STRATTEC made a payment of $1.5 million on the guarantee on February 16, 2016. Prior to making this guarantee payment, STRATTEC had a recorded liability related to the guarantee of $1.5 million at February 16, 2016, which amount was equal to the estimated fair value of the guarantee as of this date. STRATTEC’s proportionate share of the guarantee based on our ownership percentage in SAL LLC totaled $765,000 as of February 16, 2016, and accordingly we have increased our investment in SAL LLC by this amount. Our joint venture partner did not guarantee their proportionate share of the SAL Credit Facility. As a result, we recorded a loss equal to our partner’s proportionate share of the fair value of the STRATTEC guarantee based upon our partner’s ownership interest in the joint venture of $488,000 during fiscal 2015 and $247,000 during the nine months ended March 27, 2016.

Included in other income, net in the current year period and prior year period were the following items (in thousands):

 

 

Foreign currency transaction gains during the current year period resulted from activity associated with foreign denominated assets held by our Mexican subsidiaries. We entered into the Mexican Peso currency forward contracts to minimize earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. Our Rabbi Trust assets fund our amended and restated supplemental executive retirement plan. The investments held in the Trust are considered trading securities.  

23

---

 

Our effective tax rate was 28.3 percent for the current year period. Our effective tax rate for our fiscal year ended June 28, 2015, before the impact of a net reduction in our liability for unrecognized tax benefits was 30.2 percent. The decrease in our current year period effective tax rate from our fiscal 2015 effective tax rate was the result of the impact of the non-controlling interest portion of our pre-tax income during each period as well as an increase in income subject to tax in foreign taxing jurisdictions, which have lower statutory rates than in the U.S. The non-controlling interest impacts the effective tax rate as ADAC-STRATTEC LLC and STRATTEC POWER ACCESS LLC entities are taxed as partnerships for U.S. tax purposes. Our effective tax rate was 29.3 percent for the nine month period ended March 29, 2015. Our income tax provision for the nine month period ended March 29, 2015, included a reduction in our liability for unrecognized tax benefits and related interest of approximately $936,000, which reduced our effective tax rate for that period to 29.3 percent. The nine month period ended March 27, 2016 did not include an adjustment to our liability for unrecognized tax benefits. The change in our effective tax rate between the current year period and the prior year period is the result of the impact of the non-controlling interest portion of our pre-tax income during each period as well as an increase in income subject to tax in foreign taxing jurisdictions, which have lower statutory rates than in the U.S.

Liquidity and Capital Resources

Outstanding Receivable Balances from Major Customers

Our primary source of cash flow is from our major customers, which include Fiat Chrysler Automobiles, General Motors Company and Ford Motor Company. As of the date of filing this Form 10-Q with the Securities and Exchange Commission, all of our major customers are making payments on their outstanding accounts receivable in accordance with the payment terms included on their purchase orders. A summary of our outstanding receivable balances from our major customers as of March 27, 2016 was as follows (in millions):

 

 

Cash Balances in Mexico

We earn a portion of our operating income in Mexico, which is deemed to be permanently reinvested. As of March 27, 2016, $12.7 million of our $23.2 million cash and cash equivalents balance was deemed to be permanently reinvested in Mexico. A portion of our cash balances in Mexico will be used for future capital expenditures and a future plant expansion in Mexico as discussed herein. We currently do not intend nor foresee a need to repatriate these funds. We expect existing domestic cash and cash equivalents and cash flows from operations to continue to be sufficient to fund our operating activities and cash commitments for investing and financing activities, such as regular quarterly dividends and capital expenditures, for at least the next 12 months and thereafter for the foreseeable future. Should we require more capital in the U.S. than is generated by our operations domestically, for example to fund significant discretionary activities, such as acquisitions of businesses and share repurchases, we could elect to repatriate future earnings from foreign jurisdictions or raise capital in the U.S. through borrowings under our revolving credit facility. These alternatives could result in higher effective tax rates, increased interest expense, or other dilution of our earnings.

Cash Flow Analysis

 

 

24

---

 

Net cash provided by operating activities was $8.4 million during the current year period compared to $23.6 million during the prior year period. The change in operating cash flow between periods was due to a reduction in our operating profit in the current year period as compared to the prior year period, as discussed above under Analysis of Results of Operations, and an increase in working capital requirements in the current year period as compared to the prior year period. The change in our working capital requirements between periods was the result of a reduction in accounts receivable balances during the current year period of $2.9 million compared to a reduction in accounts receivable balances during the prior year period of $6.0 million and an increase in other asset balances during the current year period of $3.3 million compared to a reduction in other assets balances during the prior year period of $1.5 million. Accounts receivable balances as of the beginning of the prior year period were higher as a result of the impact of $11 million in incremental service parts sales in support of a General Motors recall campaign during our quarter ended June 29, 2014, which balances were collected during the prior year period. Increased receivable balances as of the beginning of our current year period as compared to the end of the current year period was impacted by higher sales during our fiscal 2015 fourth quarter as compared to our fiscal 2016 third quarter. The change in the working capital requirements for other assets between periods was impacted by our investment in customer tooling asset balances. Such balances increased during the current year period while decreasing during the prior year period. Customer tooling asset balances consist of costs incurred for the development of tooling that will be directly reimbursed by the customer whose parts are produced from the tools. Increases and decreases in customer tooling asset balances resulted from the differences in the timing between tooling development spending required to meet customer production requirements and related customer reimbursements.

Significant cash payments impacting net cash provided by operating activities during both the current year period and prior year period included cash payments made under our incentive bonus plans, cash payments for Federal, state and foreign income taxes, and cash contributions made to our qualified pension plan.  Cash payments under our incentive bonus plans totaled $5.2 million in the current year period compared to $7.3 million during the prior year period. Cash payments made for Federal, state and foreign income taxes totaled $4.0 million during the current year period compared to $12.3 million during the prior year period. Cash contributions of $3 million were made to our qualified pension plan during the current year period. No cash contributions were made to our qualified pension plan during the nine months ended March 29, 2015. Additionally, a $6 million payment was made during the current year period to settle certain accrued customer price concessions and related warranty matters.

Net cash used by investing activities of $16.1 million during the current year period and $22.3 million during the prior year period included capital expenditures of $14.3 million and $21.7 million, respectively. Capital expenditures during each period were made in support of requirements for new product programs and the upgrade and replacement of existing equipment. Current year period capital expenditures included $2.2 million for the purchase of land related to the construction of a new ADAC-STRATTEC facility in the mid-Mexico area. Refer to discussion under Future Capital Expenditures included herein. Prior year period capital expenditures of $2.1 million and $4.5 million were also made for the purchase of additional facilities in Juarez, Mexico and Auburn Hills, Michigan, respectively. Net cash used by investing activities during the current year period also included a $150,000 loan to our joint venture, STRATTEC Advanced Logic LLC, in support of operating expenses and working capital needs as well as a cash capital contribution of $1.5 million to STRATTEC Advanced Logic LLC as a result of the payment of a loan guarantee as discussed under Equity (Loss) Earnings of Joint Ventures included in Notes to Financial Statements herein. Additionally, a current year period cash capital contribution of $220,000 to our joint venture, VAST LLC, was completed for purposes of funding operations in Brazil. Net cash used by investing activities during the prior year period also included a $384,000 cash capital contribution to our joint venture, VAST LLC, for purposes of funding operating expenses and a $215,000 loan to our joint venture, VAST LLC, in support of VAST LLC’s purchase of the non-controlling interest in VAST do Brasil and in support of funding operating costs of the Brazilian entity.

Net cash provided by financing activities during the current year period of $5.6 million included $20.5 million of additional borrowings under credit facilities and $609,000 of proceeds received from stock option exercises and related excess tax benefits, partially offset by repayments of borrowings under credit facilities of $12.5 million, $1.4 million of regular quarterly dividend payments to shareholders and $1.6 million of dividend payments to non-controlling interests in our subsidiaries. Net cash provided by financing activities of $7.1 million during the prior year period included $9.0 million of additional borrowings under credit facilities and $734,000 of proceeds received from stock option exercises and related excess tax benefits, partially offset by $1.3 million of regular quarterly dividend payments to shareholders, $882,000 of dividend payments to non-controlling interests in our subsidiaries and $500,000 of repayments of borrowings under credit facilities.

25

---

 

VAST LLC Cash Requirements

Other than as provided below, no cash capital contributions were made to VAST LLC during the current year period or the prior year period. We currently anticipate that both VAST China and Minda-VAST Access Systems have adequate debt facilities in place over the next fiscal year to cover the future operating and capital requirements of each business. During the nine months ended March 27, 2016, capital contributions totaling $660,000 were made to VAST LLC for purposes of funding operations in Brazil. STRATTEC’s portion of the capital contributions totaled $220,000. During the nine months ended March 29, 2015, capital contributions totaling $384,000 were made to VAST LLC by each partner in support of operating expenses. During the nine months ended March 29, 2015, a loan was made by each partner, STRATTEC, WITTE, and ADAC, to VAST LLC totaling $215,000 for each partner in support of VAST LLC’s purchase of the non-controlling interest in VAST do Brasil and to fund operating costs of the Brazilian entity. Additionally, we anticipate VAST do Brasil will require a capital contribution of approximately $600,000 collectively by all VAST partners to fund operations during the remainder of calendar 2016. STRATTEC’s portion of the capital contributions is anticipated to be $200,000.

ADAC-STRATTEC LLC Cash Requirements

As discussed under Future Capital Expenditures included herein, ADAC-STRATTEC de Mexico (ASdM), a wholly owned subsidiary of ADAC-STRATTEC LLC, which is a joint venture between STRATTEC SECURITY CORPORATION and ADAC Automotive, intends to construct a new manufacturing facility in the mid-Mexico area. Total capital expenditures required for the land, facility, paint system, and assembly equipment is expected to total approximately $22 million. We anticipate financing the required capital expenditures through a combination of partner capital contributions, bank loans, and current operating cash flow. As a result, effective April 27, 2016, the ADAC-STRATTEC Credit Facility was amended to increase the available borrowings under the credit facility from $10 million to $20 million. Under the terms of the amended credit agreement, a capital contribution to ADAC-STRATTEC LLC of $6 million collectively from STRATTEC and ADAC is required to be completed by September 30, 2016. STRATTEC’s portion of the required capital contribution will be $3.06 million.

STRATTEC Advanced Logic, LLC Cash Requirements

Beginning with the fourth quarter of fiscal year 2015, STRATTEC provided 100 percent of the financial support to fund the start-up operating losses of STRATTEC Advanced Logic, LLC due to our partner’s inability to contribute capital to this joint venture. We anticipate STRATTEC will continue to fund 100 percent of the start-up costs through fiscal year 2016.

Future Capital Expenditures

We anticipate capital expenditures will be approximately $19 million to $20 million in fiscal 2016 in support of requirements for new product programs, the upgrade and replacement of existing equipment, and the purchase of land by ASdM for the construction of a new facility in the mid-Mexico area. Capital expenditures totaled $14.3 million for the nine month period ended March 27, 2016. On March 17, 2016, ASdM, a wholly owned subsidiary of ADAC-STRATTEC LLC, which is a joint venture between STRATTEC SECURITY CORPORATION and ADAC Automotive, purchased land in Leon, Mexico. ASdM intends to construct a new manufacturing facility on this land in the mid-Mexico area. This facility is expected to be used primarily to paint and assemble door handle products. Currently, the ADAC-STRATTEC LLC joint venture has net sales of approximately $60 million. With newly awarded customer business, we anticipate net sales will increase to approximately $120 million within the next two years. Total capital expenditures required for the land, facility, paint system, and assembly equipment is expected to total approximately $22 million. We anticipate financing the required capital expenditures through a combination of partner capital contributions, bank loans, and current operating cash flow.

Stock Repurchase Program

Our Board of Directors has authorized a stock repurchase program to buy back outstanding shares of our common stock. Shares authorized for buy back under the program totaled 3,839,395 at March 27, 2016. A total of 3,655,322 shares have been repurchased over the life of the program through March 27, 2016, at a cost of approximately $136.4 million. No shares were repurchased during the nine month periods ended March 27, 2016 or March 29, 2015. Additional repurchases may occur from time to time and are expected to continue to be funded by cash flow from operations and current cash balances. Based on the current economic environment and our preference to conserve cash for other uses, we anticipate modest or no stock repurchase activity for the remainder of fiscal year 2016.

26

---

 

Credit Facilities

STRATTEC has a $30 million secured revolving credit facility (the “STRATTEC Credit Facility”) with BMO Harris Bank N.A. As of March 27, 2016, ADAC-STRATTEC LLC had a $10 million secured revolving credit facility (the “ADAC-STRATTEC Credit Facility”) with BMO Harris Bank N.A. Effective April 27, 2016, the ADAC-STRATTEC Credit Facility was amended to increase the available borrowings under the credit facility from $10 million to $20 million. The ADAC-STRATTEC Credit Facility is guaranteed by STRATTEC. The STRATTEC Credit Facility expires August 1, 2018. The amended ADAC-SRATTEC Credit Facility expires August 1, 2019. Borrowings under either credit facility are secured by our cash balances, accounts receivable, inventory and fixed assets located in the U.S. Interest on borrowings under both credit facilities is at varying rates based, at our option, on LIBOR plus 1.0 percent or the bank’s prime rate. Both credit facilities contain a restrictive financial covenant that requires the applicable borrower to maintain a minimum net worth level. The ADAC-STRATTEC Credit Facility includes an additional restrictive financial covenant that requires the maintenance of a minimum fixed charge coverage ratio. Outstanding borrowings under the STRATTEC Credit Facility totaled $14.5 million at March 27, 2016 and $7 million at June 28, 2015. The average outstanding borrowings and weighted average interest rate on the STRATTEC Credit Facility loans were approximately $9.7 million and 1.7 percent, respectively, during the nine months ended March 27, 2016. The average outstanding borrowings and weighted average interest rate on the STRATTEC Credit Facility loans were approximately $718,000 and 1.2 percent, respectively, during the nine months ended March 29, 2015. Outstanding borrowings under the ADAC-STRATTEC Credit Facility totaled $3.5 million at March 27, 2016 and $3.0 million at June 28, 2015. The average outstanding borrowings and weighted average interest rate on the ADAC-STRATTEC Credit Facility loans were approximately $3.1 million and 1.4 percent, respectively, during the nine months ended March 27, 2016. The average outstanding borrowings and weighted average interest rate on the ADAC-STRATTEC Credit Facility loans were approximately $3.7 million and 1.2 percent, respectively, during the nine months ended March 29, 2015.

 

SAL LLC had a $1.5 million revolving credit facility with BMO Harris Bank N.A., which was fully guaranteed by STRATTEC. The SAL Credit Facility had a maturity date of February 16, 2016. Outstanding borrowings under the SAL Credit Facility as of February 16, 2016 totaled $1.5 million. SAL LLC did not have cash available to pay the outstanding debt balance as of the maturity date. Therefore, STRATTEC made a payment of $1.5 million on the guarantee on February 16, 2016. Prior to making the guarantee payment, STRATTEC had a recorded liability related to the guarantee of $1.5 million at February 16, 2016, which amount was equal to the estimated fair value of the guarantee as of this date.

SAL LLC maintains a license agreement with Westinghouse allowing SAL LLC to do business as Westinghouse Security. STRATTEC guaranteed all payments due Westinghouse under this license agreement. As of March 27, 2016, STRATTEC has a recorded liability related to this guarantee of $250,000, which amount is equal to the amount of future payments required under the license agreement and the estimated fair value of the guarantee as of March 27, 2016.

Inflation and Other Changes in Prices

Inflation Related Items:  Over the past several years, we have been impacted by rising health care costs, which have increased our cost of associate medical coverage. A portion of these increases have been offset by plan design changes and associate wellness initiatives. We have also been impacted by increases in the market price of zinc and brass and inflation in Mexico, which impacts the U. S. dollar costs of our Mexican operations. We have negotiated raw material price adjustment clauses with certain, but not all, of our customers to offset some of the market price fluctuations in the cost of zinc. We have contracts with Bank of Montreal that provide for bi-weekly Mexican peso currency forward contracts for a portion of our estimated peso denominated operating costs. Refer to discussion under Item 3 Quantitative and Qualitative Disclosures About Market Risk included herein.

Joint Ventures and Majority Owned Subsidiaries

We participate in certain Alliance Agreements with WITTE Automotive (“WITTE”) and ADAC Automotive (“ADAC”). WITTE, of Velbert, Germany, is a privately held automotive supplier. WITTE designs, manufactures and markets automotive components, including locks and keys, hood latches, rear compartment latches, seat back latches, door handles and specialty fasteners. WITTE’s primary market for these products has been Europe. ADAC, of Grand Rapids, Michigan, is a privately held automotive supplier and manufactures engineered products, including door handles and other automotive trim parts, utilizing plastic injection molding, automated painting and various assembly processes.  

The Alliance Agreements include a set of cross-licensing agreements for the manufacture, distribution and sale of WITTE products by STRATTEC and ADAC in North America, and the manufacture, distribution and sale of STRATTEC and ADAC products by WITTE in Europe. Additionally, a joint venture company, Vehicle Access Systems Technology LLC (“VAST LLC”), in which WITTE, STRATTEC and ADAC each hold a one-third interest, exists to seek opportunities to manufacture and sell each company’s products in areas of the world outside of North America and Europe.  

27

---

 

VAST do Brasil services customers in South America. Effective March 21, 2014, VAST LLC purchased the remaining non-controlling interest in VAST do Brasil. VAST Fuzhou, VAST Great Shanghai and VAST Shanghai Co. (collectively known as VAST China), provide a base of operations to service our automotive customers in the Asian market. VAST LLC also maintains branch offices in South Korea and Japan in support of customer sales and engineering requirements.

Effective April 30, 2015, VAST LLC executed an agreement to become a 50:50 joint venture partner with Minda Management Services Limited an affiliate of both Minda Corporation Limited and Spark Minda, Ashok Minda Group of New Delhi, India (collectively “Minda”).  VAST acquired a fifty percent equity interest in the former Minda-Valeo Security Systems joint venture entity, based in Pune, India, for approximately $12 million.  This joint venture entity was renamed Minda-VAST Access Systems (“Minda-VAST”). The portion of the purchase price paid by each VAST LLC partner, STRATTEC, WITTE and ADAC, totaled $4 million during fiscal 2015. Minda-VAST has operations in Pune and Delhi and is expected to have annual sales of approximately $40 million during our fiscal year 2016. Minda and its affiliates cater to the needs of all major car, motorcycle, commercial vehicle, tractor and off-road vehicle manufacturers in India.  They are a leading manufacturer in the Indian marketplace of security & access products, handles, automotive safety, restraint systems, driver information and telematics systems for both OEMs and the aftermarket.

The VAST LLC investments are accounted for using the equity method of accounting. The activities related to the VAST LLC joint ventures resulted in equity earnings of joint ventures to STRATTEC of approximately $689,000 during the nine months ended March 27, 2016 and approximately $819,000 during the nine months ended March 29, 2015. During the nine months ended March 27, 2016, capital contributions totaling $660,000 were made to VAST LLC for purposes of funding operations in Brazil. STRATTEC’s portion of the capital contributions totaled $220,000. During the nine months ended March 29, 2015 capital contributions totaling $384,000 were made to VAST LLC by each partner in support of operating expenses. During the nine months ended March 29, 2015, a loan was made by each partner, STRATTEC, WITTE and ADAC, to VAST LLC totaling $215,000 for each partner in order to support VAST LLC’s purchase of the non-controlling interest in VAST do Brasil and to fund the operating costs of the Brazilian entity.

ADAC-STRATTEC LLC, a Delaware limited liability company, was formed in fiscal year 2007 to support injection molding and door handle assembly operations in Mexico. ADAC-STRATTEC LLC was 51 percent owned by STRATTEC and 49 percent owned by ADAC for all periods presented in this report. An additional Mexican entity, ADAC-STRATTEC de Mexico, is wholly owned by ADAC-STRATTEC LLC. ADAC-STRATTEC LLC’s financial results are consolidated with the financial results of STRATTEC and resulted in increased net income to STRATTEC of approximately $2.0 million during the nine months ended March 27, 2016 and approximately $1.8 million during the nine months ended March 29, 2015.

STRATTEC POWER ACCESS LLC (“SPA”) was formed in fiscal year 2009 to supply the North American portion of the power sliding door, lift gate and deck lid system access control products which were acquired from Delphi Corporation. SPA was 80 percent owned by STRATTEC and 20 percent owned by WITTE for all periods presented in this report. The financial results of SPA are consolidated with the financial results of STRATTEC and resulted in decreased net income to STRATTEC of approximately $1.4 million during the nine months ended March 27, 2016 and increased net income of approximately $946,000 during the nine months ended March 29, 2015.  

 

STRATTEC Advanced Logic, LLC (“SAL LLC”), was formed in fiscal 2013 to introduce a new generation of biometric security products based upon the designs of Actuator Systems LLC, our partner and the owner of the remaining ownership interest. SPA was 51 percent owned by STRATTEC for all periods presented in this report. The initial capitalization of SAL LLC totaled $1.5 million. STRATTEC’s portion of the initial capitalization totaled $765,000. Our investment in SAL LLC, for which we exercise significant influence but do not control and are not the primary beneficiary, is accounted for using the equity method. The activities related to SAL LLC resulted in an equity loss of joint ventures to STRATTEC of approximately $1.2 million during the nine months ended March 27, 2016 and approximately $957,000 during the nine months ended March 29, 2015. Effective with our fiscal 2015 fourth quarter, 100 percent of the funding for SAL LLC was being made through loans from STRATTEC to SAL LLC and through STRATTEC’s guarantee of the SAL Credit Facility which is discussed herein. Therefore, effective with our fiscal 2015 fourth quarter, even though STRATTEC maintains a 51 percent ownership interest in SAL LLC, STRATTEC began recognizing 100 percent of the losses of SAL LLC through Equity (Loss) Earnings of Joint Ventures in the accompanying Condensed Consolidated Statements of Income and Comprehensive Income. In addition, the equity loss of joint ventures for SAL LLC included the following for the periods presented (thousands of dollars):  

 

 

See further discussion under Equity (Loss) Earnings of Joint Ventures included in Notes to Financial Statements herein.

 

28

---

 

Item 3 Quantitative and Qualitative Disclosures About Market Risk

Our exposure to market risk is limited to fluctuations in raw material commodity prices, interest rate fluctuations on borrowings under our secured revolving credit facilities and foreign currency exchange rate risk associated with STRATTEC’s foreign operations. We do not utilize financial instruments for trading purposes.

Interest Rates: We are subject to interest rate fluctuations on borrowings under our revolving credit facilities. At March 27, 2016, we had $18 million of outstanding borrowings under our credit facilities. The interest expense related to borrowings under the credit facilities during the nine months ended March 27, 2016 was $95,000. A 10% increase or decrease in the interest rate on our borrowings would not have a material effect on our financial position, results of operations or cash flows.

 

Foreign Currency: We are subject to foreign currency exchange rate exposure related to the U.S. dollar costs of our manufacturing operations in Mexico. A portion of our manufacturing costs are incurred in Mexican pesos, which causes our earnings and cash flows to fluctuate due to changes in the U.S. dollar/Mexican peso exchange rate.  We own and operate manufacturing operations in Mexico.  As a result, a portion of our manufacturing costs are incurred in Mexican pesos, which causes our earnings and cash flows to fluctuate due to changes in the U.S. dollar/Mexican peso exchange rate.  As of March 27, 2016, we have executed contracts with Bank of Montreal that provide for bi-weekly Mexican peso currency forward contracts for a portion of our estimated peso denominated operating costs. The current peso currency forward contracts include settlement dates that began on October 16, 2015 and end on June 15, 2017. No forward contracts were in place during fiscal 2015 or outstanding as of June 28, 2015. Our objective in entering into these currency forward contracts is to minimize our earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. The Mexican peso forward contracts are not used for speculative purposes and are not designated as hedges.  As a result, all currency forward contracts are recognized in our accompanying condensed consolidated financial statements at fair value and changes in the fair value are reported in current earnings as part of Other Income, net.

The following table quantifies the outstanding Mexican peso forward contracts as of March 27, 2016 (thousands of dollars, except average forward contract exchange rates):

The fair market value of all outstanding Mexican peso forward contracts in the accompanying Condensed Consolidated Balance Sheets was as follows (thousands of dollars):

 

 

The pre-tax effects of the Mexican peso forward contracts are included in Other Income, net on the accompanying Condensed Consolidated Statements of Operations and Comprehensive Income and consisted of the following (thousands of dollars):

 

 

29

---

 

Raw Materials Commodity Prices: Our primary raw materials are high-grade zinc, brass, nickel silver, aluminum, steel and plastic resins. These materials are generally available from a number of suppliers, but we have chosen to concentrate our sourcing with one primary vendor for each commodity or purchased component. We believe our sources of raw materials are reliable and adequate for our needs. However, the development of future sourcing issues related to using existing or alternative raw materials and the global availability of these materials as well as significant fluctuations in the market prices of these materials may have an adverse effect on our financial results if the increased raw material costs cannot be recovered from our customers. Given the significant financial impact on us relating to changes in the cost of our primary raw materials, we now attempt to quote quarterly material price adjustments for changes in our zinc costs in our negotiations with our customers. Our success in obtaining these quarterly price adjustments in our customer contracts is dependent on separate negotiations with each customer. It is not a standard practice for our customers to include such price adjustments in their contracts. We have been successful in obtaining quarterly price adjustments in some of our customer contracts. However, we have not been successful in obtaining the adjustments with all of our customers.

 

 

 

30

---

 

Item 4 Controls and Procedures

We maintain disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the "Exchange Act")), that are designed to ensure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act, are recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and that the information required to be disclosed by the Company in reports that it files or submits under the Exchange Act are accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure. As of the end of the period covered by this report, we carried out an evaluation, under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of the end of such period, our disclosure controls and procedures were effective at reaching a level of reasonable assurance. It should be noted that in designing and evaluating the disclosure controls and procedures, management recognized that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management necessarily was required to apply its judgment in evaluating the cost benefit relationship of possible controls and procedures. We have designed our disclosure controls and procedures to reach a level of reasonable assurance of achieving the desired control objectives.

There was no change in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during our most recently completed fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

 

 

 

31

---

 

Part II

Other Information

 

Item 1 Legal Proceedings

In the normal course of business, we may be involved in various legal proceedings from time to time.  We do not believe we are currently involved in any claim or action the ultimate disposition of which would have a material adverse effect on our financial statements.

 

Item 1A—Risk Factors

There have been no material changes to the risk factors disclosed in our Form 10-K as filed with the Securities and Exchange Commission on September 4, 2015.

 

Item 2 Unregistered Sales of Equity Securities and Use of Proceeds—

Our Board of Directors authorized a stock repurchase program on October 16, 1996, and the program was publicly announced on October 17, 1996. The Board of Directors has periodically increased the number of shares authorized for repurchase under the program, most recently in August 2008. The program currently authorizes the repurchase of up to 3,839,395 shares of our common stock from time to time, directly or through brokers or agents, and has no expiration date. Over the life of the repurchase program through March 27, 2016, a total of 3,655,322 shares have been repurchased at a cost of approximately $136.4 million. No shares were repurchased during the nine month period ended March 27, 2016.

 

Item 3 Defaults Upon Senior Securities—None

 

Item 4 Mine Safety Disclosures—None

 

Item 5 Other Information—None

 

Item 6 Exhibits

(a)  Exhibits

 

 

 

 

 

32

---

 

SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

 

33

Exhibit 31.1

CERTIFICATION OF CHIEF EXECUTIVE OFFICER

PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002

 

I, Frank J. Krejci, certify that:

 

1.I have reviewed this quarterly report on Form 10-Q of STRATTEC SECURITY CORPORATION;

 

2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

 

3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

 

4.The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

 

(a)designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

(b)designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

(c)evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

(d)disclosed in this report any change in the registrant's internal control over financial reporting that occurred during the registrant's most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant's internal control over financial reporting; and

 

5.The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of registrant's board of directors (or persons performing the equivalent functions):

 

(a)all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

 

(b)any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

 

Date:  May 5, 2016

/s/ Frank J. Krejci

Frank J. Krejci,

Chief Executive Officer

Exhibit 31.2

CERTIFICATION OF CHIEF FINANCIAL OFFICER

PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002

 

I, Patrick J. Hansen, certify that:

 

1.I have reviewed this quarterly report on Form 10-Q of STRATTEC SECURITY CORPORATION;

 

2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

 

3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

 

4.The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

 

(a)designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

(b)designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

(c)evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

(d)disclosed in this report any change in the registrant's internal control over financial reporting that occurred during the registrant's most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant's internal control over financial reporting; and

 

5.The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of registrant's board of directors (or persons performing the equivalent functions):

 

(a)all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

 

(b)any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

 

Date:  May 5, 2016

/s/ Patrick J. Hansen

Patrick J. Hansen,

Chief Financial Officer

Exhibit 32

 

Certification of Periodic Financial Report

Pursuant to 18 U.S.C. Section 1350

 

 

Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, each of the undersigned officers of STRATTEC SECURITY CORPORATION (the "Company") certifies that the Quarterly Report on Form 10-Q of the Company for the quarter ended March 27, 2016 fully complies with the requirements of Section 13(a) of the Securities Exchange Act of 1934 and information contained in that Form 10-Q fairly presents, in all material respects, the financial condition and results of operations of the Company.

 

 

 

Frank J. Krejci,

Chief Executive Officer

 

 

 

Patrick J. Hansen,

Chief Financial Officer

 

 

This certification is made solely for purpose of 18 U.S.C. Section 1350, subject to the knowledge standard contained therein, and not for any other purpose.